Search Results

This SAE Information Report provides a comparative summary between the various messages found in the SAE ATIS standards work (notably SAE J2313, J2353, J2354, J2369 and J2374) and that found in the GATS standard (Global Automotive Telematics Standard). GATS is a message set meant to be deployed on mobile phone systems based on the GSM (Global System for Mobile Communication) phone system which is being deployed in European markets and which the SAE may need to harmonize with as part of the World Standards activities of TC204. This document provides an overview of the various types of supported messages and how they compare with US terms and messages. Some selected features of the GATS work are recommended for assimilation into the next revision of ATIS standards. No attempt at determining a U.S. policy in this regard is provided. This document seeks to provide the reader familiar with SAE ATIS with a high level overview of technical knowledge of the GATS approach in similar areas.

This SAE Information Report provides a comparative summary between the various messages found in the SAE ATIS standards work (notably SAE J2313, J2353, J2354, J2369 and J2374) and that found in the GATS standard (Global Automotive Telematics Standard). GATS is a message set meant to be deployed on mobile phone systems based on the GSM (Global System for Mobile Communication) phone system which is being deployed in European markets and which the SAE may need to harmonize with as part of the World Standards activities of TC204. This document provides an overview of the various types of supported messages and how they compare with US terms and messages. Some selected features of the GATS work are recommended for assimilation into the next revision of ATIS standards. No attempt at determining a U.S. policy in this regard is provided. This document seeks to provide the reader familiar with SAE ATIS with a high level overview of technical knowledge of the GATS approach in similar areas.

This SAE Standard serves as the guidance document for the J2945/x family of standards as illustrated in Figure 7. It contains cross-cutting material which applies to the other J2945/x standards, including recommended practice for the use of Systems Engineering (SE) and generic DSRC interface requirements content. The scope for the DSRC system environment is to provide for the information exchange between a host vehicle and another DSRC enabled device, a device worn by or otherwise attached to a traveler, a roadside device, or a management center, to address safety, mobility, and environmental system needs. The audience for this document includes the technical teams of developers of the J2945/x documents and the implementers of the applications which are based on the J2945/x documents.

This Abstract Syntax Notation (ASN.1) File is the precise source code used for SAE International Standard J2735. As part of an international treaty, all US ITS standards are expressed in "ASN.1 syntax". ASN.1 Syntax is used to define the messages or "ASN specifications". Using the ASN.1 specification, a compiler tool produces the ASN library which will then be used to produce encodings (The J2735 message set uses UPER encoding). The library is a set of many separate files that collectively implement the encoding and decoding of the standard. The library is then used by any application (along with the additional logic of that application) to manage the messages. The chosen ASN tool is used to produce a new copy of the library when changes are made, and it is then linked to the final application being developed. The ASN library manages many of the details associated with ASN syntax, allowing for subtle manipulation to make the best advantage of the encoding style.

This SAE Standard defines methods and messages to efficiently translate sequences of text and other types of data into and out of indexed values and look-up tables for effective transmission. This document defines: a Methods and Data Elements for handling indexes and strings in ATIS applications and message sets b Message Sets to support the delivery and translations of tables used in such strings c Tables of Nationally standardized strings for use in ATIS message descriptions And examples of each in illustrative portions. While developed for ATIS use, the methods defined in this document are useful for any textual strings in any Telematics applications found both in Intelligent Vehicles and elsewhere.

This SAE Standard defines methods and messages to efficiently translate sequences of text and other types of data into and out of indexed values and look-up tables for effective transmission. This document defines: a Methods and Data Elements for handling indexes and strings in ATIS applications and message sets b Message Sets to support the delivery and translations of tables used in such strings c Tables of Nationally standardized strings for use in ATIS message descriptions And examples of each in illustrative portions. While developed for ATIS use, the methods defined in this document are useful for any textual strings in any Telematics applications found both in Intelligent Vehicles and elsewhere.

This SAE Standard provides a table of textual messages meeting the requirements for expressing the names of street and roads and some basic building blocks for phrases commonly used in the ITS industry. The tables provided herein are taken from SAE J2369, and follow the rules of SAE J2540 and therefore allow a local representation in various different languages, media expressions, etc. to allow true international use of these phrases. The phrases are predominantly intended to provide a means to express street names including pre and post fixes ( North Oak Street is an example name with a prefix “North” and main portion “Oak” and a suffix “Street”). Other phrases exist for other specific specialty areas of ITS, and all such phrases follow a set of encoding and decoding rules outlined in SAE J2540 to ensure that the use of these phrases in messages remain interoperable between disparate types of user equipment.

This SAE Standard provides a table of textual messages meeting the requirements for expressing “Radio Data Systems” (RDS) phrases commonly used in the ITS industry. They can be used both over the RDS subcarrier transmission media as part of a 37-bit long “Group 8a message” as well as being used to provide a common content list of phrases used in a wide number of other media and applications. This document SHALL define the normative index values to be used, extending the CEN established list to provide phrases needed by US practitioners. This standard provides non-normative textual phrases which MAY be used by implementers to ensure intelligible results. This document SHALL follow the formats and rules established in SAE J2540 in the expressions, manipulations, and use of such tables. It should be pointed out that within the rules established by this document a variety of final table are all considered “compliant” with the document, and may vary as fits the needs of implementers.

This SAE Standard provides a table of textual messages meeting the requirements for expressing “Radio Data Systems” (RDS) phrases commonly used in the ITS industry. They can be used both over the RDS subcarrier transmission media as part of a 37-bit long “Group 8a message” as well as being used to provide a common content list of phrases used in a wide number of other media and applications. This document SHALL define the normative index values to be used, extending the CEN established list to provide phrases needed by US practitioners. This standard provides non-normative textual phrases which MAY be used by implementers to ensure intelligible results. This document SHALL follow the formats and rules established in SAE J2540 in the expressions, manipulations, and use of such tables. It should be pointed out that within the rules established by this document a variety of final table are all considered “compliant” with the document, and may vary as fits the needs of implementers.

This Abstract Syntax Notation (ASN.1) File is the precise source code used for SAE International Standard J2735. As part of an international treaty, all US ITS standards are expressed in "ASN.1 syntax". ASN.1 Syntax is used to define the messages or "ASN specifications". Using the ASN.1 specification, a compiler tool produces the ASN library which will then be used to produce encodings (The J2735 message set uses UPER encoding). The library is a set of many separate files that collectively implement the encoding and decoding of the standard. The library is then used by any application (along with the additional logic of that application) to manage the messages. The chosen ASN tool is used to produce a new copy of the library when changes are made, and it is then linked to the final application being developed. The ASN library manages many of the details associated with ASN syntax, allowing for subtle manipulation to make the best advantage of the encoding style.

This Abstract Syntax Notation (ASN.1) File is the precise source code used for SAE International Standard J2735. As part of an international treaty, all US ITS standards are expressed in "ASN.1 syntax". ASN.1 Syntax is used to define the messages or "ASN specifications". Using the ASN.1 specification, a compiler tool produces the ASN library which will then be used to produce encodings (The J2735 message set uses UPER encoding). The library is a set of many separate files that collectively implement the encoding and decoding of the standard. The library is then used by any application (along with the additional logic of that application) to manage the messages. The chosen ASN tool is used to produce a new copy of the library when changes are made, and it is then linked to the final application being developed. The ASN library manages many of the details associated with ASN syntax, allowing for subtle manipulation to make the best advantage of the encoding style.