Refine Your Search

Topic

Search Results

Standard

Aftermarket Wheels - Passenger Cars and Light Truck - Performance Requirements and Test Procedures

2008-05-15
HISTORICAL
J2530_200805
This SAE Recommended Practice provides performance and sampling requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.
Standard

Aftermarket Wheels - Passenger Cars and Light Truck - Performance Requirements and Test Procedures

2004-03-12
HISTORICAL
J2530_200403
This SAE Recommended Practice provides performance and sampling requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.
Standard

Aftermarket Wheels - Passenger Cars and Light Truck - Performance Requirements and Test Procedures

2016-04-27
CURRENT
J2530_201604
This SAE Recommended Practice provides performance, sampling, and certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.
Standard

Aftermarket Wheels—Passenger Cars and Light Truck—Performance Requirements and Test Procedures

2009-11-09
HISTORICAL
J2530_200911
This SAE Recommended Practice provides performance, sampling, and certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.
Standard

Biaxial Wheel Fatigue Test

2016-04-27
CURRENT
J2562_201604
This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks and minimum cycle requirement for ferrous wheels for ballasted passenger car applications. The appendices provide scalable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.
Standard

Biaxial Wheel Fatigue Test

2005-11-07
HISTORICAL
J2562_200511
This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks. The appendices provide scaleable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.
Standard

Corrosion Test Master Establishment

2019-09-18
WIP
J2636
This SAE lab recommended practice may be applied to corrosion test methods such as salt spray, filiform, Corrosion creep back, etc. This procedure is intended to permit corrosion testing to be assessed between Laboratories for correlation purposes.
Standard

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

2019-09-18
WIP
J2635
This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application.
Standard

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

2007-08-09
HISTORICAL
J2635_200708
This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application.
Standard

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

2015-03-19
CURRENT
J2635_201503
This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application.
Standard

Mechanical and Material Requirements for One Piece Wheel Nuts

1996-05-01
HISTORICAL
J2283_199605
This SAE Standard covers the chemical, metallurgical, and mechanical requirements for one piece passenger car and truck ferrous wheel nuts with conical or spherical nut seats for the following sizes: a. M10 x 1.25 M14 x 1.5 9/16-18 and b. M12 x 1.25 M12 X 1.5 1/2-20. This test is for ordinary wheel nuts. Special applications (nut material and/or configurations) may require special conditions which must meet load values in 3.4.1.
Standard

Mechanical and Material Requirements for One Piece Wheel Nuts

2005-11-29
HISTORICAL
J2283_200511
This SAE Standard covers the chemical, metallurgical, and mechanical requirements for one piece passenger car and truck ferrous wheel nuts with conical or spherical nut seats for the following sizes: a. M10 x 1.25 M14 x 1.5 9/16-18 and b. M12 x 1.25 M12 X 1.5 1/2-20. This test is for ordinary wheel nuts. Special applications (nut material and/or configurations) may require special conditions which must meet load values in 3.4.1.
Standard

Nomenclature - Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles

2016-05-13
CURRENT
J1982_201605
This SAE Recommended Practice establishes uniform engineering nomenclature for the most common wheel constructions, and their components used on passenger cars, light trucks, and multipurpose vehicles. These wheel constructions are welded “Disc Wheels”, “Cast Wheels” and “Forged Wheels”. This nomenclature and the accompanying drawings are intended to define fundamental wheel terms rather than to provide a comprehensive tabulation of all wheel design types.
Standard

Nomenclature--Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles

1998-08-01
HISTORICAL
J1982_199808
This SAE Recommended Practice establishes uniform engineering nomenclature for wheels and their components used on passenger cars, light trucks, and multipurpose vehicles. This nomenclature and accompanying drawings are intended to define fundamental wheel terms rather than to provide a comprehensive tabulation of all wheel designs.
Standard

Nomenclature--Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles

1991-12-01
HISTORICAL
J1982_199112
This SAE Recommended Practice establishes uniform engineering nomenclature for wheels and their components used on passenger cars, light trucks, and multipurpose vehicles. This nomenclature and accompanying drawings are intended to define fundamental wheel terms rather than to provide a comprehensive tabulation of all wheel designs.
Standard

Nomenclature—Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles

2010-01-07
HISTORICAL
J1982_201001
This SAE Recommended Practice establishes uniform engineering nomenclature for the most common wheel constructions, and their components used on passenger cars, light trucks, and multipurpose vehicles. These wheel constructions are welded “Disc Wheels”, “Cast Wheels” and “Forged Wheels”. This nomenclature and the accompanying drawings are intended to define fundamental wheel terms rather than to provide a comprehensive tabulation of all wheel design types.
Standard

Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles)

2016-09-16
CURRENT
J1981_201609
The test is designed to evaluate the frontal impact resistance of wheel and tire assemblies used with passenger cars, light trucks and multi-purpose vehicles. The test is specifically related to vehicle pothole tests that are undertaken by most vehicle manufacturers. The scope has been expanded to allow the use of a striker that can be angled to preferentially impact the inboard and outboard wheel flange. For side impact of the outboard rim flange only, please refer to SAE J175. This SAE Recommended Practice provides a procedure to test a wheel or a tire and the test failure criteria. The specific test for a vehicle requires input from a pothole test on that vehicle to establish the drop height of the striker used in this test.
Standard

Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles)

2011-04-25
HISTORICAL
J1981_201104
The test is designed to evaluate the frontal impact resistance of wheel and tire assemblies used with passenger cars, light trucks and multi-purpose vehicles. The test is specifically related to vehicle pothole tests that are undertaken by most vehicle manufacturers. The scope has been expanded to allow the use of a striker that can be angled to preferentially impact the inboard and outboard wheel flange. For side impact of the outboard rim flange only, please refer to SAE J175. This SAE Recommended Practice provides a procedure to test a wheel or a tire and the test failure criteria. The specific test for a vehicle requires input from a pothole test on that vehicle to establish the drop height of the striker used in this test.
Standard

Road Hazard Impact Test for Wheel and Tire Assemblies (Passenger Car, Light Truck, and Multipurpose Vehicles)

2002-05-08
HISTORICAL
J1981_200205
The test is designed to evaluate the frontal impact resistance of wheel and tire assemblies used with passenger cars, light trucks and multi-purpose vehicles. The test is specifically related to vehicle pothole tests that are undertaken by most vehicle manufacturers. The scope has been expanded to allow the use of a striker that can be angled to preferentially impact the inboard and outboard wheel flange. For side impact of the outboard rim flange only, please refer to SAE J175. This SAE Recommended Practice does not provide standards of performance.
X