Search Results

Standard

Aftermarket Composite Wheels Made of Matrix Material and Fiber Reinforcement Intended for Normal Highway Use - Test Procedures and Performance Requirements

2020-09-09

CURRENT

J3204_202009

This SAE Recommended Practice provides minimum performance requirements and uniform procedures for fatigue and impact testing, electrical resistance, and maximum operating temperature (MOT) of wheels intended for normal highway use on passenger cars, light trucks, and multipurpose vehicles.

Standard

Aftermarket Wheels - Passenger Cars and Light Truck - Performance Requirements and Test Procedures

2016-04-27

HISTORICAL

J2530_201604

This SAE Recommended Practice provides performance, sampling, and certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

Standard

Aftermarket Wheels - Passenger Cars and Light Truck - Performance Requirements and Test Procedures

2021-09-21

CURRENT

J2530_202109

This SAE Recommended Practice provides performance, sampling, certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, refer to SAE J1204. These performance requirements apply only to wheels made of materials included in Tables 1 and 2. For wheels using composite material, refer to SAE J3204. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

Standard

Aftermarket Wheels-Passenger Cars and Light Truck - Performance Requirements and Test Procedures

2004-03-12

HISTORICAL

J2530_200403

This SAE Recommended Practice provides performance and sampling requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

Standard

Aftermarket Wheels—Passenger Cars and Light Truck—Performance Requirements and Test Procedures

2008-05-15

HISTORICAL

J2530_200805

This SAE Recommended Practice provides performance and sampling requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

Standard

Aftermarket Wheels—Passenger Cars and Light Truck—Performance Requirements and Test Procedures

2009-11-09

HISTORICAL

J2530_200911

This SAE Recommended Practice provides performance, sampling, and certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

Standard

Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations

2011-04-28

HISTORICAL

J1986_201104

This SAE Recommended Practice is intended to serve as a guide for standardization of features, dimensions, and configurations of balance weights for aluminum and steel wheels intended for use on passenger cars, light trucks, and multipurpose vehicles to assure good installation and retention of the balance weight. This document also provides test procedures and minimum performance requirements for testing balance weight retention.

Standard

Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations

2021-10-26

WIP

J1986

This SAE Recommended Practice is intended to serve as a guide for standardization of features, dimensions, and configurations of balance weights for aluminum and steel wheels intended for use on passenger cars, light trucks, and multipurpose vehicles to assure good installation and retention of the balance weight. This document also provides test procedures and minimum performance requirements for testing balance weight retention.

Standard

Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations

2016-03-18

CURRENT

J1986_201603

This SAE Recommended Practice is intended to serve as a guide for standardization of features, dimensions, and configurations of balance weights for aluminum and steel wheels intended for use on passenger cars, light trucks, and multipurpose vehicles to assure good installation and retention of the balance weight. This document also provides test procedures and minimum performance requirements for testing balance weight retention.

Standard

Biaxial Wheel Fatigue Test

2016-04-27

HISTORICAL

J2562_201604

This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks and minimum cycle requirement for ferrous wheels for ballasted passenger car applications. The appendices provide scalable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.

Standard

Biaxial Wheel Fatigue Test

2021-07-16

CURRENT

J2562_202107

This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks and minimum cycle requirement for ferrous wheels for ballasted passenger car applications. The appendices provide scalable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.

Standard

Biaxial Wheel Fatigue Test

2005-11-07

HISTORICAL

J2562_200511

This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks. The appendices provide scaleable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.

Standard

Corrosion Test Master Establishment

2015-03-19

HISTORICAL

J2636_201503

This SAE lab recommended practice may be applied to corrosion test methods such as salt spray, filiform, Corrosion creep back, etc. This procedure is intended to permit corrosion testing to be assessed between Laboratories for correlation purposes.

Standard

Corrosion Test Master Establishment

2019-10-21

CURRENT

J2636_201910

This SAE lab recommended practice may be applied to corrosion test methods such as salt spray, filiform, Corrosion creep back, etc. This procedure is intended to permit corrosion testing to be assessed between Laboratories for correlation purposes.

Standard

Filiform Corrosion Test Procedure for Painted Aluminum Wheels and Painted Aluminum Wheel Trim

2007-08-09

HISTORICAL

J2635_200708

This test procedure defines a laboratory procedure for generating and evaluating filiform corrosion on painted aluminum wheels and painted aluminum wheel trim. While this test was developed specifically for the testing of painted aluminum wheels and wheel trim it may be applicable to other components. The application owner will need to assess if this test generates filiform similar to that found in the relevant usage to ensure it will provide accurate data for the application.

Standard

MECHANICAL AND MATERIAL REQUIREMENTS FOR ONE PIECE WHEEL NUTS

1996-05-01

HISTORICAL

J2283_199605

This SAE Standard covers the chemical, metallurgical, and mechanical requirements for one piece passenger car and truck ferrous wheel nuts with conical or spherical nut seats for the following sizes: This test is for ordinary wheel nuts. Special applications (nut material and/or configurations) may require special conditions which must meet load values in 3.4.1.

Standard

Mechanical and Material Requirements for One Piece Wheel Nuts

2012-10-18

CURRENT

J2283_201210

This SAE Standard covers the chemical, metallurgical, and mechanical requirements for one piece passenger car and truck ferrous wheel nuts with conical or spherical nut seats for the following sizes: This test is for typical wheel nuts. Special applications (nut material and/or configurations) may require special conditions which must meet load values in 3.4.

Standard

Mechanical and Material Requirements for One Piece Wheel Nuts

2005-11-29

HISTORICAL

J2283_200511

This SAE Standard covers the chemical, metallurgical, and mechanical requirements for one piece passenger car and truck ferrous wheel nuts with conical or spherical nut seats for the following sizes: This test is for typical wheel nuts. Special applications (nut material and/or configurations) may require special conditions which must meet load values in 3.4.

Standard

Performance Requirements and Test Procedures for Aftermarket Wheel Fastening Systems on Passenger Cars and Light Trucks

2021-11-03

CURRENT

J2316_202111

This SAE Recommended Practice provides a uniform procedure and performance requirements for evaluating fastening systems for normal highway use on aftermarket passenger cars and light trucks (except dual wheels, which are covered by SAE J1965) and multipurpose passenger vehicles. The fastening system includes the wheel, wheel bolts, and wheel nuts, as well as vehicle mating surface. The coefficients of friction for steel and aluminum mating surfaces are provided based on information available. Many factors must be considered in design and validation of wheel attachments for each specific vehicle. Where the procedure is used for original equipment applications the vehicle manufacturers specifications supersede those noted.

Standard

Registration and Conformity Assessment Process for Passenger Cars and Light Trucks Wheels

2020-02-13

HISTORICAL

J3010_202002

The SAE J2530 provides performance, sampling, test procedures, and marking requirements for wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicle. This Recommended Practice (which is separate from SAE J2530) specifies the workflow of the Wheel Conformity Assessment Program. This program allows wheel manufacturers to register their product compliant to SAE J3010. The following items precede display of “SAE J3010” on any particular wheel design: a Manufacturer registration All manufactures with the objective to pursue registration, shall complete the registration as an individual manufacturer via the registrar’s website http://wheeldb.registrar.domain.