Search Results

Abstract Identity-Anonymized CAN (IA-CAN) protocol is a secure CAN protocol, which provides the sender authentication by inserting a secret sequence of anonymous IDs (A-IDs) shared among the communication nodes. To prevent malicious attacks from the IA-CAN protocol, a secure and robust system error recovery mechanism is required. This article presents a central management method of IA-CAN, named the IA-CAN with a global A-ID, where a gateway plays a central role in the session initiation and system error recovery. Each ECU self-diagnoses the system errors, and (if an error happens) it automatically resynchronizes its A-ID generation by acquiring the recovery information from the gateway. We prototype both a hardware version of an IA-CAN controller and a system for the IA-CAN with a global A-ID using the controller to verify our concept.

Abstract One of the most important factors affecting the performance of vehicle active chassis control systems is the tire-road friction coefficient. Accurate estimation of the friction coefficient can lead to better performance of these controllers. In this study, a new three-step friction estimation algorithm, based on intelligent tire concept, is proposed, which is a combination of experiment-based and vehicle dynamic based approaches. In the first step of the proposed algorithm, the normal load is estimated using a trained Artificial Neural Network (ANN). The network was trained using the experimental data collected using a portable tire testing trailer. In the second step of the algorithm, the tire forces and the wheel longitudinal velocity are estimated through a two-step Kalman filter. Then, in the last step, using the estimated tire normal load and longitudinal and lateral forces, the friction coefficient can be estimated.

Abstract Vehicle-to-infrastructure (V2I) connectivity technology presents the opportunity for vehicles to perform autonomous longitudinal control to navigate safely and efficiently through sequences of V2I-enabled intersections, known as connected corridors. Existing research has proposed several control systems to navigate these corridors while minimizing energy consumption and travel time. This article analyzes and compares the simulated performance of three different autonomous navigation systems in connected corridors: a V2I-informed constant acceleration kinematic controller (V2I-K), a V2I-informed model predictive controller (V2I-MPC), and a V2I-informed reinforcement learning (V2I-RL) agent. A rules-based controller that does not use V2I information is implemented to simulate a human driver and is used as a baseline. The performance metrics analyzed are net energy consumption, travel time, and root-mean-square (RMS) acceleration.

Abstract In the automotive domain, the overall complexity of technical components has increased enormously. Formerly isolated, purely mechanical cars are now a multitude of cyber-physical systems that are continuously interacting with other IT systems, for example, with the smartphone of their driver or the backend servers of the car manufacturer. This has huge security implications as demonstrated by several recent research papers that document attacks endangering the safety of the car. However, there is, to the best of our knowledge, no holistic overview or structured description of the complex automotive domain. Without such a big picture, distinct security research remains isolated and is lacking interconnections between the different subsystems. Hence, it is difficult to draw conclusions about the overall security of a car or to identify aspects that have not been sufficiently covered by security analyses.

Abstract To address the comfort and safety concerns related to driving vehicles, the Advanced Driver Assistance System (ADAS) is gaining huge popularity. The general architecture of autonomous vehicles includes perception, planning, control, and actuation. This article aims mainly at the controls aspect of one of the emerging ADAS features Lane Centering System (LCS). Limitations in deploying this feature from a controls point of view include maintaining the lane center with winding curvatures, dealing with the dynamic environment, optimizing controls where the perception of lane boundaries is erroneous, and, finally, concurring with the driver’s preferences. Although some research is available on LCS controls, most works are related only to the lateral controls by actuating steering. To increase the robustness, a comprehensive control strategy that involves lateral control, as well as longitudinal control along with a novel strategy to select the mode of driving, is proposed.

Abstract A Direct Yaw-Moment Control (DYC) logic for a rear-wheel-drive electric-powered vehicle is proposed. The vehicle is a Formula SAE (FSAE) type race car, with two electric motors powering each rear wheel. Vehicle baseline balance is neutral at low speeds, for increased maneuverability, and increases understeering at high speeds (due to the aerodynamic configuration) for stability. A controller that can deal with these yaw response variations, modelling uncertainties, and vehicle nonlinear behavior at limit handling is proposed. A two-level control strategy is considered. For the upper level, yaw rate and sideslip angle are considered as feedback control variables and a cubic-error Proportional Derivative (PD) controller is proposed for the feedback control. For the lower level, a traction control algorithm is used, together with the yaw moment requirement, for torque allocation.

Abstract Modern Automated Driving (AD) systems rely on safety measures to handle faults and to bring the vehicle to a safe state. To eradicate lethal road accidents, car manufacturers are constantly introducing new perception as well as control systems. Contemporary automotive design and safety engineering best practices are suitable for analyzing system components in isolation, whereas today’s highly complex and interdependent AD systems require a novel approach to ensure resilience to multiple-point failures. We present a holistic and cost-effective safety concept unifying advanced safety measures for handling multiple-point faults. Our proposed approach enables designers to focus on more pressing issues such as handling fault-free hazardous behavior associated with system performance limitations. To verify our approach, we developed an executable model of the safety concept in the formal specification language mCRL2.

Abstract Autonomous vehicles (AVs) are expected to have a great impact on mobility by decreasing commute time and vehicle fuel consumption and increasing safety significantly. However, there are still issues that can jeopardize their wide impact and their acceptance by the public. One of the main limitations is motion sickness (MS). Hence, the last year’s research is focusing on improving motion comfort within AVs. On one hand, users are expected to perceive AVs driving style as more aggressive, as it might result in excessive head and body motion. Therefore, speed reduction should be considered as a countermeasure of MS mitigation. On the other hand, the excessive reduction of speed can have a negative impact on traffic. At the same time, the user’s dissatisfaction, i.e., acceptance and subjective comfort, will increase due to a longer journey time.

Abstract The tailpipe zero-emission legislation has pushed the automotive industry toward more electrification. Regenerative braking is the capability of electric machines to provide brake torque. So far, the regenerative braking feature is primarily considered due to its effect on energy efficiency. However, using individual e-machines for each wheel makes it possible to apply the antilock braking function due to the fast torque-tracking characteristics of permanent magnet synchronous motors (PMSM). Due to its considerable cost reduction, in this article, a feasibility study is carried out to investigate if the ABS function can be done purely through regenerative braking using a mid-fidelity model-based approach. An uni-tire model of the vehicle with a surface-mount PMSM (SPMSM) model is used to verify the idea. The proposed ABS control system has a hierarchical structure containing a high-level longitudinal slip controller and a low-level SPMSM torque controller.

Abstract Technological advancements and growth in electric motors and battery packs enable vehicle propulsion electrifications, which minimize the need for fossil fuel consumption. The mobility shift to electric motors creates a demand for an efficient electric motor thermal management system that can accommodate heat dissipation needs with minimum power requirements and noise generation. This study proposes an intelligent hybrid cooling system that includes a gravity-aided passive cooling solution coupled with a smart supplementary liquid cooling system. The active cooling system contains a radiator, heat sink, variable frequency drive, alternating current (AC) fan, direct current (DC) pump, and real-time controller. A complete nonlinear mathematical model is developed using a lumped parameter approach to estimate the optimum fan and pump operations at each control interval.

Abstract The two-wheel system design is widely used in various mobile tools, such as remote-control vehicles and robots, due to its simplicity and stability. However, the specific wheel and body models in the real world can be complex, and the control accuracy of existing algorithms may not meet practical requirements. To address this issue, we propose a double inverted pendulum on mobile device (DIPM) model to improve control performances and reduce calculations. The model is based on the kinetic and potential energy of the DIPM system, known as the Euler-Lagrange equation, and is composed of three second-order nonlinear differential equations derived by specifying Lagrange. We also propose a stable feedback control method for mobile device drive systems. Our experiments compare several mainstream reinforcement learning (RL) methods, including linear quadratic regulator (LQR) and iterative linear quadratic regulator (ILQR), as well as Q-learning, SARSA, DQN (Deep Q Network), and AC.

Abstract Integrated control for automated vehicles in platoons with nonlinear coupled dynamics is developed in this article. A nonlinear MPC approach is used to address the multi-input multi-output (MIMO) nature of the problem, the nonlinear vehicle dynamics, and the platoon constraints. The control actions are determined by using model-based prediction in conjunction with constrained optimization. Two distinct scenarios are then simulated. The first scenario consists of the multivehicle merging into an existing platoon in a controlled environment in the absence of noise, whereas the effects of external disturbances, modeling errors, and measurement noise are simulated in the second scenario. An extended Kalman filter (EKF) is utilized to estimate the system states under the sensor and process noise effectively.

Abstract The principal issue in choosing an energy management strategy (EMS) for hybrid electric vehicles (HEVs) has been the way of determining the optimal share of electric energy in hybrid drive. In this article, a novel EMS is proposed that, along with maximum engine efficiency in the hybrid drive, can optimize the share of battery energy for the maximum efficiency of vehicle power train expanded with an imaginary power plant that, by delivering the electric energy to a grid, feeds the vehicle battery. It is proved that the expanded power train efficiency has the local maximum for a wide range of wheel power demand. The relation between the wheel power demand in hybrid drive, the share of battery energy, and the maximum efficiency of the expanded power train is conducted offline. Downloaded to the onboard control system, it enables the operation with the instantaneously optimal share of battery energy and the control system to operate with the low computational load.

Abstract Nowadays, with the great advancement of automobile intellectualization, vehicle integrated dynamic control is increasingly becoming a hot research field. For vehicle stability, this article focuses on the coordinated control of Direct Yaw-moment Control (DYC) and Active Front Steering (AFS). First of all, the nominal control variables (yaw rate and sideslip angle) are designed based on the linear two Degrees of Freedom (2 DOF) vehicle model, in which the phase difference between the actual and nominal variables has been pointed out due to the approximate substitution with first-order time-delay transfer function. Secondly, considering the uncertainty of cornering stiffness per axle, and increasing robustness of the system, the Optimal Guaranteed Cost Control (OGCC) theory is adopted to design the coordinated controller.

Abstract In this article, a novel hybrid metaheuristic based on passing vehicle search (PVS) cultural algorithm (CA) is proposed. This contribution has a twofold aim: First is to present the new hybrid PVS-CA. Second is to prove the effectiveness of the proposed algorithm for adaptive signal timing optimization. For this, a system that can adapt efficiently to the real-time traffic situation based on priority signal control is developed. Hence, Transit Signal Priority (TSP) techniques have been used to adjust signal phasing in order to serve emergency vehicles (EVs) and manage the tram priority in a coordinated tram intersection. The system used in this study provides cyclic signal operation based on a real-time control approach, including an optimization process and a database to manage the sensor data from detectors for real-time predictions of EV and tram arrival time.

Abstract Hybrid Electric Vehicles (HEV) are increasingly gaining focus and usage for their ability to effectively reduce fuel consumption and emissions. In retrofit HEVs, additional electrical power components are retrofitted to the existing fuel-powered engine-based conventional vehicles which provide an easier and more economical means to transform them into HEVs. In this work, a novel control strategy is developed for the energy management of a retrofit mild parallel HEV where there is neither any control over the engine system nor direct sensing of engine variables. The energy management–based control strategies of a Model Predictive Control (MPC) and Equivalent Consumption Minimization Strategy (ECMS) are analyzed in the context of a retrofit HEV, and the ECMS cost function is integrated into the MPC framework, which is successfully implemented in a Model-In-the-Loop (MIL) platform by execution under suitable driving cycles.

Abstract The automotive industry is facing a multifaceted problem of supervisory energy management, computational power, and digitalization. In response, this article proposes the use of agents utilizing the belief, desire, and intent (BDI) framework as a means to flexibly create online vehicle management systems (VMSs). Under such proposal, a community of agents form a vehicle configuration. Each agent represents a vehicle subsystem and contains knowledge specific to its respective hardware. With this knowledge and partial observation over its operating environment, each agent uses the BDI framework to deliberate over its actions. An interaction protocol, which implements a distributed constraint satisfaction problem (DCSP) algorithm, is used between the agents to create sensible emergent behavior of the vehicle. This interaction protocol allows independently reasoning components to produce emergent behavior that is flexible, robust, verifiable, and explainable.

Abstract In order to improve the safety and dynamic performance of electric vehicles equipped with four in-wheel electric motors, and prevent the wheels from locking or slipping when braking or accelerating, a new longitudinal control strategy which combines ASR traction and ABS braking control is proposed using an observation algorithm of effective radius for four wheel of electric vehicle. Using the electric motor torques as the unique actuator signal sources, this combined ASR/ABS can act as acceleration slip regulation (ASR) by preventing the wheels from slipping during acceleration and as an antilock braking system (ABS) by preventing the wheels from getting locked during braking. A variation of effective radius of the wheel’s tire can have an incidence on the longitudinal and lateral control.

Abstract An automatic emergency braking (AEB) adaptive control algorithm based on the emergency braking behavior of professional drivers fitting (PDF) model is proposed, which can simultaneously take into account safety and ride comfort on different friction roads. Three typical AEB control algorithms are selected for comparative analysis, namely, AEB control algorithms based on the safety distance (SD) model, time-to-collision (TTC) model, and PDF model, respectively. The simulation results of the European New Car Assessment Programme (Euro-NCAP) test scenarios show that the AEB control algorithm based on the PDF model can ensure both safety and ride comfort. In order to overcome the defect that the original AEB control algorithm based on the PDF model does not consider the variation of road friction, the corresponding optimization and improvement are carried out.

Abstract This article presents a two-stage Dynamic Programming (DP)-based approach to solving the problem of Hybrid Energy Storage System (HESS) component sizing, specifically, the lithium-ion (Li-ion) battery and ultracapacitor (UC) for a mild hybrid electric powertrain. In the first stage, optimal sizing of the battery for the powertrain without a UC is solved for a specified drive cycle, which is used in the reported literature. In the second stage, the battery is complemented with a UC cascaded through a direct current-to-direct current (DC/DC) converter in a semi-active configuration. A DP-based formulation is then constructed and solved for the hybrid energy storage subsystem.