Wireless sensing--the road to future digital avionics A look at the comparative performance of wired and wireless sensors, type of wireless sensors & interfaces, frequency performance, protocols, network topologies and qualification standards. Testing reality in an increasingly complex design space Digital simulation tools have transformed the designing and testing of new airplanes, as well as the way they are manufactured and sustained.
Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation
AIr traffic management plans advanced The FAA and Boeing recently introduced separate plans for improving the nation's air traffic management system. The Aerospace Congress & Exhibition, hosted by The Boeing Co., will address those proposals along with many other technical and non-technical issues affecting the global aerospace industry. High-temperature ceramic concept Astrium GmbH Space Infrastructure investigates ceramic matrix composites for reusable launch vehicle engine heat shield applications.
Safeguarding aircraft systems How several systems suppliers, airframers, and researchers have approached the need for increased system safeguards and protection against lightning strikes. One last look back A review of the technology news, discussions, and announcements from the first Aerospace Congress & Exhibition held September 10-13 in Seattle, WA. Powering unmanned aircraft Pratt & Whitney Canada is developing and testing a commercial turbofan engine derivative for high-altitude unmanned air vehicle applications. 737-800 winglet integration A joint venture between Boeing and Aviation Partners Inc. is involved in developing a performance improvement for in-service aircraft.
From motorsports to aerospace Pi Research brings its motorsports digital data-acquisition technology to the aerospace industry. New testing solutions Aerospace Engineering editors review the latest testing products, equipment, and technologies from the idustry's suppliers. The world of business jet technology "Aerospace Engineering" provides an overview of new business jets and the technological innovations that make them fly in the first installment of a two part series. Dassault adds another Falcon The Falcon 7X featurs a host of new technologies, including an advanced wing design, making it Dassault's next-generation business jet. Eclipse makes business jets affordable New manufacturing techniques and high-volume approaches are enabling Eclipse to bring an affordable aircraft to the business jet market. Cessna establishes its Sovereignty The company finalizes development of the Sovereign and prepares it for FAA certification, which is expected late this year.
Europe's double-decker giant "Aerospace Engineering" provides an overview of the issues and technocal challenges faced by Airbus in the development of the A380. Quiet please Several technologies are under development at GE Aircraft Engines that address strigent demands from the airlines for reduced noise emissions from new aircraft engines. Thermal material solutions Astrium has begun investigating several new metallic thermal protection system concepts for reusable launch vehicles. Bringing the best of both worlds in engine technology GE Aircraft Engines and Pratt & Whitney together developed the GP7000, a powerplant alternative for the Airbus A380 superjumbo aircraft.
Fuel-tank inerting A series of aircraft flight and ground tests evaluated the effectiveness of ground-based inerting as a means of reducing the flammability of center wing furl tanks used in the commercial transport fleet. Making sense of quality management The International Aerospace Quality Group is a unique vehicle for communicating quality system standards and initiatives through the supply base. Top technologies for 2002 "Aerospace Engineering's" annual review of the technologies chosen by its readers to be the most significant.
The dawn of the jet age: the first 10 years One of the ironies of aviation history is that the most obvious potential power source for a fixed-wing aircraft was barely considered by the early pioneers. Airflow simulation for winglets Embraer engineers used CFD to visualize flow patterns around wings for a design retrofit. Aircraft-engine-mounting analysis Engineers from Honeywell adapted a rapid analysis approach to develop and validate a complex propulsion system. Reshaping F-16 production Following its contract with the Joint Strike Fighter program, Lockheed Martin is reconfiguring its F-16 assembly line in preparation for long-term JSF production starting later this year.
Telling the future Technology and the environment, BWBs and UAVs, and nuclear power may be the forces for the future of aerospace engineering. Top technologies for 2003 "Aerospace Engineering's" annual review of the technologies chosen by its editors and readers to be the most significant. Supporting aerospace design The proper use of COTS technologies can change the range of new processes and products in the electrical sector. American attack UAVs- Part II The second article in a two-part series of a perspective on more than 100 years of unmanned flight details some of the major developments in the use of unmanned aerial vehicles for combat.
Wiring UAVs The development of electronic architectures for UAVs and UCAVs marks a major step-change in the evolution of military aircraft as significant as the emergence of jet propulsion more than 60 years ago. Distributed simulation A new modeling technique is applied to a HALE UAV power system using detailed subsystem simulations of the turbine engine, generators, and loads. Tradition, transition, and transformation SAE 100 Future look: As the sun sets on the first 100 years of SAE, we refllect on a proud and rich tradition of contribution to the transportation industry. The battle for information flow SAE 100 Future look: Epic Data recognizes that the recent development of highly secure, futuristic real-time information flows provide a tremendous competitive advantage to field commanders making life or death decisions.
Top technologies for 2004 "Aerospace Engineering's" annual review of the technologies chosen by its readers to be the most significant. Tooling around in the computer Much of the latest software is very capable, but learning how to get the best out of it, and getting the business processes right, is the key to success.
Dassault-business aviation pioneer More than four decades of design and engineering evolution have seen the French business jet producer create a wide range of twin-and tri-jet Falcons, from the 20 to the latest 7X. Maintaining reliability Regional airlines and business jet operators care about fuel efficiency, just not as much as engine reliability. Introducing Greg Henderson, SAE President for 2006 The Lockheed Martin executive steps up to take SAE into its next 100 years.
Designing reliable boards The makers of electronic hardware are boosting reliability by reducing the number of components that can fail while improving ruggedization for those circuit boards. Better seen, not heard Reducing noise profiles is a multi-targeted task for engine OEMs, airframers, airport authorities, and regulatory agencies. Farnborough 2006 "Sustainable Aviation" will be a key subject as representatives of the global aerospace industry meet at the Farnborough International Airshow.
New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.
DuPont: from art to part DuPont's newly appointed global automotive technology director Jeffrey Sternberg, in conversation with Ian Adcock. Igniting the creative spark Ryan Gehm and Lindsay Brooke report on breakthrough technologies at the SAE Congress. Winning ways Ian Adcock exclusively reveals the newly formed Williams Advanced Engineering facility. Driverless future: steering a safe course Google unleashing 100 driverless, motorised pods on to the road has put the need for rigorous safety standards centre stage, as Ian Adcock reports
Car of 2100 A.D. AEI gave readers a chance to speak out on what they thought people in 2100 would be driving. We have chosen the best submissions. Also, the AEI editors have included their best guess as to what cars will be in 2100. We realize that this is a guess but the real answer will not be known for 100 years. V8 power for BMW's M5 The new 294-kW (400-hp) S62 engine developed by BMW's M GmbH features Double VANOS variable intake and exhaust valve timing, electronic drive-by-wire, and oil circulation boosted as a function of lateral cornering force. Northstar revised for 2000 Improvements to the powerplant include a roller-follower valvetrain, improved combustion chamber, center-feed intake manifold, coil-on-plug cassette ignition system, and a Siemens powertrain controller. Aston Martin's first V12 Available in both the DB7 Vantage Coupe and Volante, the flexible all-alloy engine delivers 85% of its peak torque at just 1500 rpm.
Ford's new four The largest engine development program in company history will lead to at least 200 applications, starting with the new Mondeo's Duratec HE and replacement of its existing cast-iron-block four-cylinders with higher aluminum content powerplants. GM Powertrain's new inline six for SUV's For the first time in nearly two decades, three new General Motors vehicles will feature an inline six-cylinder engine developed by GM Powertrain. Fuel-stratified injection from VW Though gasoline direct-injection technology is being introduced in the Lupo FSI, VW says it easily can be adapted for high-volume use in larger vehicles such as the Polo and Golf. LS6 for Z06 The latest high-performance Corvette engine features improved breathing, new pistons, an increased compression ratio, and a new high-profile camshaft.
E-business: the new game in town With the initial formation of Covisint in February 2000, and with other online ventures established over the past couple of years, the automotive industry has thrown its chips into the B2B e-commerce game. The following is an update on how the industry is faring now that its cards are on the table. Simulation: redefining the development process Just as companies sought to shorten the development cycle with intergrated product teams, they do so again with up-front computer-aided analysis and simulation. New connections for automobiles Thanks to innovative technologies and applications, flexible circuitry is helping drive new trends, such as modularity, in automotive design, according to Sheldahl. NAIAS highlights: production Since becoming an international event in 1989, the North American International Auto Show in Detroit has hosted 620 North American and worldwide vehicle introductions.
Driven to test As automotive manufacturers and suppliers continually attempt to cut costs and reduce development cycle times, outsourcing of testing is becoming more prevalent in the industry. Testing resources This section highlights some of the latest testing products, equipment, and technologies used in sundry automotive applications from the industry's suppliers. Transmission options In this comprehensive review of technology, ZF's Group Vice President for Product Development concludes that the future belongs to automated manual, continously variable, and six-speed automatic and manual transmissions with increased capacities. Automotive moodular developments Engineers from Plastic Omnium Auto Exterieur and Inoplastic Omnium discuss design considerations for front-end module and plastic tailgate concepts. Flexible controls architecture for hybrid-electric vehicles General Motors and Motorola collaborate on a prototype vehicle for PNGV.