Search Results

Propulsion Fanjet Evolution - the Next Steps Composites Dry Drilling Composites Using Carbon Dioxide Cooling

Wireless sensing--the road to future digital avionics A look at the comparative performance of wired and wireless sensors, type of wireless sensors & interfaces, frequency performance, protocols, network topologies and qualification standards. Testing reality in an increasingly complex design space Digital simulation tools have transformed the designing and testing of new airplanes, as well as the way they are manufactured and sustained.

Ruggedizing Commercial-Grade Computers into MIL-Hardened Systems An Introduction to PCM Heat Sinks Eye Tracking Technology Improving the Skills Gap, Efficiency, and Quality Assurance in Aerospace Manufacturing Streamlining EMC Solutions for Avionics Interfaces Hardware Design of a High Dynamic Range Radio Frequency (RF) Harmonic Measurement System. Using RISC-V to Simplify Data Logging in Space Novel Characterization Methods for Anisotropic and Mixed-Conduction Materials Seven new characterization methods have been developed for the specialized materials used in state-of-the-art electronic and optoelectronic devices. Circuit Models for Robust, Adaptive Neural Control Understanding a nematode's simple circuit could provide a foundation for understanding much more complex behaviors.

Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation

AIr traffic management plans advanced The FAA and Boeing recently introduced separate plans for improving the nation's air traffic management system. The Aerospace Congress & Exhibition, hosted by The Boeing Co., will address those proposals along with many other technical and non-technical issues affecting the global aerospace industry. High-temperature ceramic concept Astrium GmbH Space Infrastructure investigates ceramic matrix composites for reusable launch vehicle engine heat shield applications.

Safeguarding aircraft systems How several systems suppliers, airframers, and researchers have approached the need for increased system safeguards and protection against lightning strikes. One last look back A review of the technology news, discussions, and announcements from the first Aerospace Congress & Exhibition held September 10-13 in Seattle, WA. Powering unmanned aircraft Pratt & Whitney Canada is developing and testing a commercial turbofan engine derivative for high-altitude unmanned air vehicle applications. 737-800 winglet integration A joint venture between Boeing and Aviation Partners Inc. is involved in developing a performance improvement for in-service aircraft.

From motorsports to aerospace Pi Research brings its motorsports digital data-acquisition technology to the aerospace industry. New testing solutions Aerospace Engineering editors review the latest testing products, equipment, and technologies from the idustry's suppliers. The world of business jet technology "Aerospace Engineering" provides an overview of new business jets and the technological innovations that make them fly in the first installment of a two part series. Dassault adds another Falcon The Falcon 7X featurs a host of new technologies, including an advanced wing design, making it Dassault's next-generation business jet. Eclipse makes business jets affordable New manufacturing techniques and high-volume approaches are enabling Eclipse to bring an affordable aircraft to the business jet market. Cessna establishes its Sovereignty The company finalizes development of the Sovereign and prepares it for FAA certification, which is expected late this year.

Europe's double-decker giant "Aerospace Engineering" provides an overview of the issues and technocal challenges faced by Airbus in the development of the A380. Quiet please Several technologies are under development at GE Aircraft Engines that address strigent demands from the airlines for reduced noise emissions from new aircraft engines. Thermal material solutions Astrium has begun investigating several new metallic thermal protection system concepts for reusable launch vehicles. Bringing the best of both worlds in engine technology GE Aircraft Engines and Pratt & Whitney together developed the GP7000, a powerplant alternative for the Airbus A380 superjumbo aircraft.

Fuel-tank inerting A series of aircraft flight and ground tests evaluated the effectiveness of ground-based inerting as a means of reducing the flammability of center wing furl tanks used in the commercial transport fleet. Making sense of quality management The International Aerospace Quality Group is a unique vehicle for communicating quality system standards and initiatives through the supply base. Top technologies for 2002 "Aerospace Engineering's" annual review of the technologies chosen by its readers to be the most significant.

Closer to completion The International Space Station proves to be an ongoing engineering experiment with an ultimate goal of becoming a human space-living reality. High-speed interconnects An industry expert from Tyco Electronics explores emerging electronics applications in the aerospace and defense markets that involve the transfer of large volumes of high-speed data. Collaboration software Interactive product development tools are now widely available, and they can decrease design time and cast, improve quality, and help generate new business. Introducing Dr. Jack E. Thompson, SAE President for 2003 A change agent with early roots in the automotive industry gets in the Society's driver's seat for 2003.

The dawn of the jet age: the first 10 years One of the ironies of aviation history is that the most obvious potential power source for a fixed-wing aircraft was barely considered by the early pioneers. Airflow simulation for winglets Embraer engineers used CFD to visualize flow patterns around wings for a design retrofit. Aircraft-engine-mounting analysis Engineers from Honeywell adapted a rapid analysis approach to develop and validate a complex propulsion system. Reshaping F-16 production Following its contract with the Joint Strike Fighter program, Lockheed Martin is reconfiguring its F-16 assembly line in preparation for long-term JSF production starting later this year.

Telling the future Technology and the environment, BWBs and UAVs, and nuclear power may be the forces for the future of aerospace engineering. Top technologies for 2003 "Aerospace Engineering's" annual review of the technologies chosen by its editors and readers to be the most significant. Supporting aerospace design The proper use of COTS technologies can change the range of new processes and products in the electrical sector. American attack UAVs- Part II The second article in a two-part series of a perspective on more than 100 years of unmanned flight details some of the major developments in the use of unmanned aerial vehicles for combat.

Wiring UAVs The development of electronic architectures for UAVs and UCAVs marks a major step-change in the evolution of military aircraft as significant as the emergence of jet propulsion more than 60 years ago. Distributed simulation A new modeling technique is applied to a HALE UAV power system using detailed subsystem simulations of the turbine engine, generators, and loads. Tradition, transition, and transformation SAE 100 Future look: As the sun sets on the first 100 years of SAE, we refllect on a proud and rich tradition of contribution to the transportation industry. The battle for information flow SAE 100 Future look: Epic Data recognizes that the recent development of highly secure, futuristic real-time information flows provide a tremendous competitive advantage to field commanders making life or death decisions.

Top technologies for 2004 "Aerospace Engineering's" annual review of the technologies chosen by its readers to be the most significant. Tooling around in the computer Much of the latest software is very capable, but learning how to get the best out of it, and getting the business processes right, is the key to success.

Flying safer Software is being designed to predict pending failures, warn pilots, and maybe even fly the plane. CMM + laser probe = complete inspection Sonaca gave up its manual inspection methods in favor of a digital approach to save time- and money. A rounded view of fibers The use of fibers for aerospace gyroscope applications- notably inertial navigation and platform stabilization- is common now, but it was not always so. Piston engine propulsion SAE 100 Future look: As the propulsion industry looks to the future, the barriers remain challenging, the drivers more critical, but the innovations more promising. What's downstream in turbine technology SAE 100 Future look: Gas turbine machines-aviations, industrial, and vehicular- are versatile and cost-effective machines used for the provision of electricity, mechanical load power, and propulsion.

Dassault-business aviation pioneer More than four decades of design and engineering evolution have seen the French business jet producer create a wide range of twin-and tri-jet Falcons, from the 20 to the latest 7X. Maintaining reliability Regional airlines and business jet operators care about fuel efficiency, just not as much as engine reliability. Introducing Greg Henderson, SAE President for 2006 The Lockheed Martin executive steps up to take SAE into its next 100 years.

Designing reliable boards The makers of electronic hardware are boosting reliability by reducing the number of components that can fail while improving ruggedization for those circuit boards. Better seen, not heard Reducing noise profiles is a multi-targeted task for engine OEMs, airframers, airport authorities, and regulatory agencies. Farnborough 2006 "Sustainable Aviation" will be a key subject as representatives of the global aerospace industry meet at the Farnborough International Airshow.

Composite simulation helps fill gaps There is no turning back from using carbon-fiber reinforced plastics and other composite materials for aerospace parts. Simulation providers are finding new opportunities to help reduce cost and improve efficiencies in designing and making aerospace parts made of composites. Shifting gears smoothly Ric Kleine, a 30-year veteran of Cummins Inc. and former SAE Commercial Vehicle VP, seeks continuity over change as he moves into SAE's driver's seat.

New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.

DuPont: from art to part DuPont's newly appointed global automotive technology director Jeffrey Sternberg, in conversation with Ian Adcock. Igniting the creative spark Ryan Gehm and Lindsay Brooke report on breakthrough technologies at the SAE Congress. Winning ways Ian Adcock exclusively reveals the newly formed Williams Advanced Engineering facility. Driverless future: steering a safe course Google unleashing 100 driverless, motorised pods on to the road has put the need for rigorous safety standards centre stage, as Ian Adcock reports