Refine Your Search

Topic

Author

Search Results

Standard

32 Bit Binary CL (BCL) and 7 Bit ASCII CL (ACL) Exchange Input Format for Numerically Controlled Machines

2015-07-01
CURRENT
EIA494B
The scope of this Standard is the definition of the response of a numerically controlled machine to a valid sequence of records made up of 32 bit binary words or ASCII text strings. The Standard defines the structure of these records and of the 32 bit binary words or ASCII text strings which make up the records. This standard addresses the control of machines capable of performing 2, 3, 4, and 5 axis motion of an active tool (mill, laser, pen, etc.) relative to a part, and those capable of 2 and 4 axis tool motion relative to a rotating part (turning machines), including parallel tool slide sets capable of concurrent (merged) motion.
Standard

ABBREVIATIONS AND ACRONYMS FOR USE ON THE FLIGHT DECK

1988-07-01
HISTORICAL
ARP4105A
This document is intended to establish preferred abbreviations for terms used on panels, controls, displays, instruments, placards, and markings. The recommendations apply to equipment used by crew members in the flight deck of transport aircraft. The abbreviations, acronyms, and symbols do not supersede those used in airworthiness regulations or aeronautical charts or other aircraft documents.
Standard

AVIATION SATELLITE COMMUNICATION SYSTEM PART 2 SYSTEM DESIGN AND EQUIPMENT FUNCTIONAL DESCRIPTION

2012-06-27
CURRENT
ARINC741P2-11
This document describes the desired operational capability of the equipment as configured with the first generation Satellite Data Unit (SDU) to provide data and voice communications, as well as additional standards necessary to ensure interchangeability. Supplement 11 adds commentary on the commonality of physical interfaces between ARINC 741 systems defined for SwiftBroadband safety services and ARINC 741 systems defined only for the Inmarsat Classic Aero safety services. It adds the SwiftBroadband safety services to the SDU functional definition.
Standard

Accommodation Tool Reference Point

1998-12-01
HISTORICAL
J1516_199812
Reference lines have been developed to which driver workspace accomodation tools can be located in vehicle space. The lines describe horizontal reference point locations as a function of vehicle H-point height (H30). One reference line has been established for use in vehicles with H-point heights (H30) and steering wheel diameters (W9) less than 405 and 450 mm, respectively. (Class A Vehicles) This point can be used to reference appropriate workspace tools to accommodate a driver population with a male-to-female ratio of one-to-one. Separate reference lines have been established for use in vehicles with H-point heights (H30) between 405 and 530 mm and steering wheel diameters (W9) between 450 and 560 mm with treadle type pedals. (Class B Vehicles) See Figure 1. Three lines are available for use in Class B vehicles depending on the percentages of males and females in the population the designer wishes to accommodate.
Standard

Accommodation Tool Reference Point

2009-02-10
HISTORICAL
J1516_200902
Reference lines have been developed to which driver workspace accomodation tools can be located in vehicle space. The lines describe horizontal reference point locations as a function of vehicle H-point height (H30). One reference line has been established for use in vehicles with H-point heights (H30) and steering wheel diameters (W9) less than 405 and 450 mm, respectively. (Class A Vehicles) This point can be used to reference appropriate workspace tools to accommodate a driver population with a male-to-female ratio of one-to-one. Separate reference lines have been established for use in vehicles with H-point heights (H30) between 405 and 530 mm and steering wheel diameters (W9) between 450 and 560 mm with treadle type pedals. (Class B Vehicles) See Figure 1. Three lines are available for use in Class B vehicles depending on the percentages of males and females in the population the designer wishes to accommodate.
Standard

Accommodation Tool Reference Point for Class B Vehicles

1985-10-01
HISTORICAL
J1516_198510
This Recommended Practice provides procedures for defining the Accelerator Heel Point and the Accommodation Tool Reference Point, a point on the seat H-point travel path which is used for locating various driver workspace accommodation tools in Class B vehicles (heavy trucks and buses). Three accommodation tool reference points are available depending on the percentages of males and females in the expected driver population (50:50, 75:25, and 90:10 to 95:5). These procedures are applicable to both the SAE J826 HPM and the SAE J4002 HPM-II.
Standard

Adapter - Port Connection, Ring Locked Installation and Removal of

2017-03-01
CURRENT
MA2114B
This SAE Aerospace Standard provides the essential minimum design, installation and removal standard for MA2111, MA2112, MA2113, and MA2119 adapters, and is applicable when specified on engineering drawings or in procurement documents.
X