Search Results

An integration study was performed coupling an SP-100 reactor with either a Brayton or Stirling power conversion subsystem. A power level of 100 kWe was selected for the study. The power system was to be compatible with both the lunar and Mars surface environment and require no site preparation. In addition, the reactor was to have integral shielding and be completely self-contained, including its own auxiliary power for start-up. Initial reliability studies were performed to determine power conversion redundancy and engine module size. Previous studies were used to select the power conversion optimum operating conditions (ratio of hot-side temperature to cold-side temperature). Results of the study indicated that either the Brayton or Stirling power conversion subsystems could be integrated with the SP-100 reactor for either a lunar or Mars surface power application.

Sundstrand has been investigating 270-Vdc/hybrid 115-Vac electrical power generating systems (EPGS) technology in preparation for meeting the electrical power generating system (EPGS) requirements for future aircraft (1). Systems such as the one being investigated are likely to be suitable for the More-Electric Aircraft (MEA) concepts presently under industry and military study. The present Sundstrand single-channel testbed is being further expanded to better understand the electrical system performance characteristics and power quality requirements of an MEA in which traditional mechanical subsystems are replaced by those of a “more-electric” nature. This paper presents the most recent Sundstrand 270-Vdc system transient performance data, and describes the modifications being made to the 270-Vdc/hybrid 115-Vac testbed.

This specification defines general architectural philosophy and specific design guidance for the proper installation and interface of various cabin equipment within the seats. Consistency with this specification allows each component installed on the seat to operate in concert when integrated with other relevant cabin type equipment. Standard electrical and mechanical interfaces of the In- Flight Entertainment System (IFES) equipment for the 3rd Generation Cabin Network (3GCN) associated with the seat are defined. This equipment consists of the headphone jacks (HPJ), passenger control unit (PCU)/multi function handset (including the cord), seat video display (SVD), remote data outlet (RDO), integrated seat box (ISB) which includes the seat power box (SPB)/seat data box (SDB), remote power outlet (RPO), and in-seat cables. Appropriate definitions are also provided for other electrical devices associated with the seat control/position mechanism.

Vertical-Junction-Field-Effect-Transistors (VJFETs) are currently the most mature SiC devices for high power/temperature switching. High-voltage VJFETs are typically designed normally-on to ensure voltage control operation at high current-gain. However, to exploit the high voltage/temperature capabilities of VJFETs in a normally-off high-current voltage-controlled switch, high-voltage normally-on and low-voltage normally-off VJFETs were connected in the cascode configuration. In this paper, we review the high temperature DC characteristics of VJFETs and 1200 V normally-off cascode switches. The measured parameter shifts in the 25°C to 300°C temperature range are in excellent agreement with theory, confirming fabrication of robust SiC VJFETs and cascode switches.

This handbook is intended to assist the user to understand the ANSI/EIA-649B standard principles and functions for Configuration Management (CM) and how to plan and implement effective CM. It provides CM implementation guidance for all users (CM professionals and practitioners within the commercial and industry communities, DoD, military service commands, and government activities (e.g., National Aeronautics and Space Administration (NASA), North Atlantic Treaty Organization (NATO)) with a variety of techniques and examples. Information about interfacing with other management systems and processes are included to ensure the principles and functions are applied in each phase of the life cycle for all product categories.

The 757/767 Flight Management System provides the initial operational implementation of an integrated guidance, control and display equipments based upon digital technology for commercial transport airplanes. The applied equipments are based upon the new ARINC 700 series characteristics developed by the Industry over the past five years. These characteristics were developed on the basis of limited operational experience with selected elements of the system and upon R&D efforts within the Industry. The System features automatic/manual flight profiles for optimum economics, all weather landing including rollout guidance, electronic primary flight instruments based on color (shadow mask) CRTs, inertial attitude/velocity reference based upon laser gyros, improved caution/warning and other improved performance/functional features. The system also provides significant improvements in line and shop maintenance features.

In the course of CRYOSYSTEM phase B (development phase) financed by the European Space Agency, AIR LIQUIDE (France) and Astrium Space Infrastructure (Germany) have developed an optimized design of a −183°C freezer to be used on board the International Space Station for the freezing and storage of biological samples. The CRYOSYSTEM facility consists of the following main elements: - the CRYORACK, an outfitted standard payload rack (ISPR) accommodating up to three identical Vial Freezers - the Vial Freezer, a dewar vessel capable of fast and ultra-rapid freezing, and storing up to approximately 900 vials below −183°C; the dewar is cooled by a Stirling machine producing > 6 W at 90 K. The Vial Freezer is operational while accommodated in the CRYORACK or attached to the Life Science Glovebox (LSG). One CRYORACK will remain permanently on-orbit for several years while four Vial Freezers and two additional CRYORACKs support the cyclic upload/download of samples.

Some of the methods used for experimental detection and examination of wake vortices are presented. The aim of the article is to provide the reader a brief overview of the available methods. The material is divided into two major sections, one dealing with methods used primarily in the laboratory, and the second part devoted to those used in field operations. Over one hundred articles are cited and briefly discussed.

Europe has embarked on a new programme of space exploration involving the development of rover, lander and probe missions to visit planets, moons and near Earth objects (NEOs) throughout the Solar System. Rovers and landers will require testing under simulated planetary, and NEO conditions to ensure their ability to land on and traverse the alien surfaces. ESA has begun work on a building project that will provide an enclosed and controlled environment for testing rover and lander functions such as landing, mobility, navigation and soil sampling. The facility will first support the European ExoMars mission due for launch in 2013. This mission will deliver a robotic rover to the Martian surface. This paper, the first of several on the project, gives an overview of its design configuration and construction phasing. Future papers will cover its applications and operations.

The objectives are to compare different psychological methods used to assess the evolution of the interrelations inside the crew and the relationships between the crew and the outside in a sixty days isolation/confinement's simulation. After presenting each method, results are compared. The discussion try to point out if these methods are equivalent or if they are complementary. The specificity of each method is shown and conclusions try to associate some methods with specific scientific goals.

Two turbulence models have been studied to determine which of the models should be used in further Computational Fluid Dynamics (CFD) research. A zero-equation turbulence model, Baldwin-Lomax (B-L), is easy to use, requires no history of the flow, and requires little in the way of additional computations or additional computer memory space [1]. A two-equation k-ε model, Yang-Shih (Y-S), is more difficult to implement, does require flow history, and requires many more computations and much more computer space; however, it is potentially more accurate than the B-L model [2]. Using both Navier-Stokes (NS) and Parabolized Navier-Stokes (PNS) solvers, the two models and their codes were validated against the testbed of the Wright Laboratory (WL) Mach 12 wind tunnel nozzle.

The Orion Crew and Service Modules are often compared to the Apollo Command and Service Modules due to their similarity in basic mission objective: both were dedicated to getting a crew to lunar orbit and safely returning them to Earth. Both spacecraft rely on the environmental control, life support and active thermal control systems (ECLS/ATCS) for the basic functions of providing and maintaining a breathable atmosphere, supplying adequate amount of potable water and maintaining the crew and avionics equipment within certified thermal limits. This assessment will evaluate the driving requirements for both programs and highlight similarities and differences. Further, a short comparison of the two system architectures will be examined including a side by side assessment of some selected system's hardware mass.

This work presents a comprehensive numerical model for ice accretion and Ice Protection System (IPS) simulation over a 2D component, such as an airfoil. The model is based on the Myers model for ice accretion and extended to include the possibility of a heated substratum. Six different icing conditions that can occur during in-flight ice accretion with an Electro-Thermal Ice Protection System (ETIPS) activated are identified. Each condition presents one or more layers with a different water phase. Depending on the heat fluxes, there could be only liquid water, ice, or a combination of both on the substratum. The possible layers are the ice layer on the substratum, the running liquid film over ice or substratum, and the static liquid film between ice and substratum caused by ice melting. The last layer, which is always present, is the substratum. The physical model that describes the evolution of these layers is based on the Stefan problem. For each layer, one heat equation is solved.

This paper presents an overview of the Computer Aided Systems Engineering and Analysis (CASE/A)-ECLSS series which is designed as a generalised ECLSS design and analysis package. This system was developed under NASA MSEC contract NAS8-36407 to meet the Systems Analysis requirements of the Space Station ECLSS. The Space Station represents an order of magnitude increase in complexity over current Spacecraft technologies and will seriously tax current analysis techniques. This program is capable of simulating atmospheric revitalization systems, water recovery and management systems, and single phase active thermal control systems. The program evolved from both the G189A and the SINDA programs and shares the G189A architectural concepts. The designer/ analysis interface is graphics based and allows the designer to build a model by constructing a schematic of the system under consideration.

In the design of fluid systems plumbing for aircraft engines, the designer is continually challenged by the problem of component location and routing. In order to achieve accessibility and maintainability, and to avoid physical interferences, plumbing design is accomplished through extensive graphical projection and mockups. The solution to this problem must also satisfy tubing stress limits, resonant frequencies, bracket or clamping positions available and future space requirements. To facilitate and expedite this design procedure a digital computer technique has been developed which determines the clearances between tubing and other engine components. Though not a substitute for graphical projection, this program provides a means for accurate checking for interference. It also serves a valuable purpose in the storage of previous or alternate plumbing routing arrangements for comparison.

In the first half of the next century, Mankind will expand its sphere of existence to the Moon and space, and they will stand on Mars and study the other planets. Then, humans will inevitably be required to live for long periods, two years or more, in micro-gravity and/or low gravity environments. However, it is well known that such micro or low gravity environments adversely affect human physiology and psychology. The longer the period the greater such effects are and these can result in serious health problems. To improve living conditions in space by generating artificial gravity will be important to solving these problems.

Future vehicle power systems must achieve greater flexibility and reliability than those used in previous generations. New functions that enhance safety, such as arc detection and wiring integrity verification, are essential for new systems. Embedded autonomous control, and fault correction can be built into Fault Tolerant Processors that integrate into a vehicle Open System Architecture. This approach will provide status and fault detection information to maintenance interfaces and provide fault correction. Safety is enhanced by the prevention of dangerous restarts from crew and personnel. The embedded features allow for pre-flight mission configuration to setup systems before takeoff and on-board and off-board maintenance control. This enables operators to evaluate power system health and history to help reduce turn around time.

Due to ongoing efforts by the aviation industry, much has been learned over the last several years regarding jet engine power loss and compressor damage events caused by the ingestion of high concentrations of ice crystal particles into the core flow path. Boeing has created and maintained a database of such ice crystal icing (ICI) events to aid in analysis and further study of this phenomenon. This article provides a general update on statistics derived from the Boeing event database, and provides more details on specific event clusters of interest. A series of three flight campaigns have, over the past five years, collected in-situ data in deep convective clouds that will be used for the assessment of the new FAA CFR Part 33 ice crystal environmental envelope Appendix D, and the equivalent EASA CS-25 Appendix P.