Search Results

The purpose of this SAE Recommended Practice is to establish reference standards for airflow measurements in the ranges required for testing automotive engine induction systems and to describe equipment that will facilitate the use of such standards to check the accuracy of various equipment and methods.

The purpose of this SAE Recommended Practice is to establish reference standards for airflow measurements in the ranges required for testing automotive engine induction systems and to describe equipment that will facilitate the use of such standards to check the accuracy of various equipment and methods.

The purpose of this SAE Recommended Practice is to establish reference standards for airflow measurements in the ranges required for testing automotive engine induction systems and to describe equipment that will facilitate the use of such standards to check the accuracy of various equipment and methods.

This document has been adopted by SAE to specify:

This document has been adopted by SAE to specify:

This SAE Standard has been adopted by SAE to specify: a A basis for gross engine power rating b Reference inlet air and fuel supply test conditions c A method for correcting observed power to reference conditions d A method for determining gross full load engine power with a dynamometer

This SAE Standard has been adopted by SAE to specify: a A basis for net engine power rating b Reference inlet air and fuel supply test conditions c A method for correcting observed power to reference conditions d A method for determining net full load engine power with a dynamometer

This standard test code has been adopted by SAE to specify: (a) A laboratory engine dynamometer test procedure. (b) A basis for engine power rating. (c) A method for correcting observed power to standard inlet air conditions. The pressure and temperature correction formulas contained herein should be used only within the specified range of conditions (see paragraph 8.4.1) and are not intended for altitude derating.

This standard test code has been adopted by SAE to specify: (a) A laboratory engine dynamometer test procedure. (b) A basis for engine power rating. (c) A method for correcting observed power to standard inlet air conditions. The pressure and temperature correction formulas contained herein should be used only within the specified range of conditions (see paragraph 8.4.1) and are not intended for altitude derating.

This standard has been adopted by SAE to specify:

This document specifies the procedure to be used for a manufacturer to certify the net power and torque rating of a production engine according to SAE J1349 (Rev. 8/04) or the gross engine power of a production engine according to SAE J1995. Manufacturers who advertise their engine power and torque ratings as Certified to SAE J1349 or SAE J1995 shall follow this procedure. Certification of engine power and torque to SAE J1349 or SAE J1995 is voluntary, however, this power certification process is mandatory for those advertising power ratings as “Certified to SAE J1349” or “Certified to SAE J1995.” In the event that an engine made by one manufacturer is sold to a consumer in a vehicle produced by a second manufacturer, engine certification may be completed by either manufacturer or by both manufacturers working together.

This document specifies the procedure to be used for a manufacturer to certify the net power and torque rating of a production engine according to SAE J1349 (Rev. 8/04) or the gross engine power of a production engine according to SAE J1995. Manufacturers who advertise their engine power and torque ratings as certified to SAE J1349 or SAE J1995 shall follow this procedure. Certification of engine power and torque to SAE J1349 or SAE J1995 is voluntary; however, this power certification process is mandatory for those advertising power ratings as “Certified to SAE J1349” or “Certified to SAE J1995.” In the event that an engine made by one manufacturer is sold to a consumer in a vehicle produced by a second manufacturer, engine certification may be completed by either manufacturer or by both manufacturers working together.

This document specifies the procedure to be used for a manufacturer to certify the net power and torque rating of a production engine according to SAE J1349 (Rev. 8/04) or the gross engine power of a production engine according to SAE J1995. Manufacturers who advertise their engine power and torque ratings as Certified to SAE J1349 or SAE J1995 shall follow this procedure. Certification of engine power and torque to SAE J1349 or SAE J1995 is voluntary, however, this power certification process is mandatory for those advertising power ratings as “Certified to SAE J1349” or “Certified to SAE J1995.” In the event that an engine made by one manufacturer is sold to a consumer in a vehicle produced by a second manufacturer, engine certification may be completed by either manufacturer or by both manufacturers working together.

This standard is intended to provide a method to obtain repeatable measurements that accurately reflect true engine performance in customer service. Whenever there is an opportunity for interpretation of the standard, a good faith effort shall be made to obtain the engine’s typical in-service performance and avoid finding the best possible performance under the best possible conditions. Intentional biasing of engine component or assembly tolerances to optimize performance for this test is prohibited.

This standard is intended to provide a method to obtain repeatable measurements that accurately reflect true engine performance in customer service. Whenever there is an opportunity for interpretation of the standard, a good faith effort shall be made to obtain the engine’s typical in-service performance and avoid finding the best possible performance under the best possible conditions. Intentional biasing of engine component or assembly tolerances to optimize performance for this test is prohibited.

This SAE Standard has been adopted to provide a basis for dynamometer determination of gross engine power and torque under reference conditions. It is intended for use primarily by engine manufacturers who supply engines for installation by others in applications where the engine manufacturer may not control the induction and exhaust system design or the speed at which the engine is run.

This SAE Standard has been adopted to provide a basis for dynamometer determination of gross engine power and torque under reference conditions. It is intended for use primarily by engine manufacturers who supply engines for installation by others in applications where the engine manufacturer may not control the induction and exhaust system design or the speed at which the engine is run.

This document specifies the procedure to be used for a manufacturer to certify the net power and torque rating of a production engine according to SAE J1349 (Rev. 8/04) or the gross engine power of a production engine according to SAE J1995. Manufacturers who advertise their engine power and torque ratings as Certified to SAE J1349 or SAE J1995 shall follow this procedure. Certification of engine power and torque to SAE J1349 or SAE J1995 is voluntary, however, this power certification process is mandatory for those advertising power ratings as “Certified to SAE J1349”.

This document specifies the procedure to be used for a manufacturer to certify the net power and torque rating of a production engine according to SAE J1349 (Rev. 8/04) or the gross engine power of a production engine according to SAE J1995. Manufacturers who advertise their engine power and torque ratings as Certified to SAE J1349 or SAE J1995 shall follow this procedure. Certification of engine power and torque to SAE J1349 or SAE J1995 is voluntary, however, this power certification process is mandatory for those advertising power ratings as “Certified to SAE J1349”. In the event that an engine made by one manufacturer is sold to a consumer in a vehicle produced by a second manufacturer, engine certification may be completed by either manufacturer or by both manufacturers working together. An example of the latter would be the completion of witness testing by the engine manufacturer with the submission of certification documents by the vehicle manufacturer.

This standard is intended to provide a method to obtain repeatable measurements that accurately reflect true engine performance in customer service. Whenever there is an opportunity for interpretation of the standard, a good faith effort shall be made to obtain the engine’s typical in-service performance and avoid finding the best possible performance under the best possible conditions. Intentional biasing of engine component or assembly tolerances to optimize performance for this test is prohibited.