Refine Your Search

Date

Date

Topic

Topic

Power and Propulsion Engine components Diesel / compression ignition engines Pistons Combustion chambers CTTC C2, Electrical Components and Systems Commercial Vehicle

Search Results

Viewing 1 to 20 of 20
1
Sort by title
Standard

ELECTRICAL PROPULSION CONTROL - OFF-ROAD DUMPERS
1982-08-01
HISTORICAL
J1299_198208
This recommended practice applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in SAE J1057. The recommended practice does not apply to auxiliary equipment control systems such as: (a) Battery charging systems (b) Engine wiring and control (c) Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system (d) Lighting (e) Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).
Standard

ELECTRICAL PROPULSION ROTATING EQUIPMENT—OFF-ROAD DUMPER
1982-06-01
HISTORICAL
J1317_198206
This recommended practice applies to the rotating equipment in the electrical propulsion systems on electrically propelled dumpers. It also applies to the rotating equipment installed on trailers connected to electrically propelled dumpers. The recommended practice does not apply to rotating equipment such as windshield wiper motors, battery charging generators, etc. that may be used on dumpers.
Standard

Electrical Charging Systems for Off-Road Work Machines
2019-05-10
CURRENT
J180_201905
This SAE standard describes alternator physical, performance, and application requirements for heavy-duty electrical charging systems for off-road work machines, including those defined in SAE J1116.
Standard

Electrical Indicating System Specification
2015-10-08
CURRENT
J1810_201510
This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116 and agricultural tractors as defined in ASAE S390. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.
Standard

Electrical Indicating System Specification
2010-05-11
HISTORICAL
J1810_201005
This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116 and agricultural tractors as defined in ASAE S390. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.
Standard

Electrical Indicating System Specification
2002-04-02
HISTORICAL
J1810_200204
This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.
Standard

Electrical Propulsion Control - Off-Road Dumpers
2013-02-21
CURRENT
J1299_201302
This SAE Information Report applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in J/ISO 6165. The document does not apply to auxiliary equipment control systems such as: a Battery charging systems b Engine wiring and control c Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system d Lighting e Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).
Standard

Electrical Propulsion Control—Off-Road Dumpers
2003-09-09
HISTORICAL
J1299_200309
This SAE Information Report applies to the control circuits and devices associated with the electrical propulsion system used on electric drive dumpers. Dumper is defined in J/ISO 6165. The document does not apply to auxiliary equipment control systems such as: a Battery charging systems b Engine wiring and control c Monitoring and control circuits not directly affecting the operation of the electric propulsion and retarding system d Lighting e Accessory systems (heating, air conditioning, horns, radios, emergency steering, fire protection, and similar functions).
Standard

Electrical Propulsion Rotating Equipment - Off-Road Dumper
2013-02-21
CURRENT
J1317_201302
This recommended practice applies to the rotating equipment in the electrical propulsion systems on electrically propelled dumpers. It also applies to the rotating equipment installed on trailers connected to electrically propelled dumpers. The recommended practice does not apply to rotating equipment such as windshield wiper motors, battery charging generators, etc. that may be used on dumpers.
Standard

Heavy-Duty Electrical Connector Performance Standard
2021-12-14
WIP
J2030
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications can require higher test levels, or field-testing on the intended application.
Standard

Heavy-Duty Electrical Connector Performance Standard
2007-05-07
HISTORICAL
J2030_200705
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.
Standard

Heavy-Duty Electrical Connector Performance Standard
2002-12-13
HISTORICAL
J2030_200212
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.
Standard

Heavy-Duty Electrical Connector Performance Standard
2009-06-18
HISTORICAL
J2030_200906
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.
Standard

Heavy-Duty Electrical Connector Performance Standard
2015-06-04
CURRENT
J2030_201506
This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides environmental test requirements and acceptance criteria for the application of connectors for direct current electrical systems of 50 V or less in the majority of heavy-duty applications typically used in off-highway machinery. Severe applications can require higher test levels, or field-testing on the intended application.
Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines
2010-05-11
HISTORICAL
J1614_201005
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.8 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.
Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines
2012-09-13
HISTORICAL
J1614_201209
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.
Standard

Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines
2018-11-21
CURRENT
J1614_201811
This SAE Standard specifies requirements and design guidelines for electrical wiring systems of less than 50 V and cable diameters from 0.35 to 19 mm2 used on off-road, self-propelled earthmoving machines as defined in SAE J1116 and agricultural tractors as defined in ASAE S390.
1
X