Refine Your Search

Search Results

Viewing 1 to 19 of 19
Standard

AIRCRAFT FUEL SYSTEM AND COMPONENT ICING TEST

1979-03-15
HISTORICAL
ARP1401
This Aerospace Recommended Practice (ARP) covers a brief discussion of the icing problem in aircraft fuel systems and different means that have been used to test for icing. Fuel preparation procedures and icing tests for aircraft fuel systems and components are proposed herein as a recommended practice to be used in the aircraft industry for fixed wing aircraft and their operational environment only. In the context of this ARP, the engine is not considered to be a component of the aircraft fuel system, for the engine fuel system is subjected to icing tests by the engine manufacturer for commercial and particular military applications.
Standard

Aircraft Fuel System and Component Icing Test

2016-05-17
WIP
ARP1401C
This Aerospace Recommended Practice (ARP) covers a brief discussion of the icing problem in aircraft fuel systems and different means that have been used to test for icing. Fuel preparation procedures and icing tests for aircraft fuel systems and components are proposed herein as a recommended practice to be used in the aircraft industry for fixed wing aircraft and their operational environment only. In the context of this ARP, the engine (and APU) is not considered to be a component of the aircraft fuel system, for the engine fuel system is subjected to icing tests by the engine/APU manufacturer for commercial and specific military applications. This ARP is written mostly to address fuel system level testing. It also provides a means to address the requirements of 14 CFR 23.951(c) and 25.951(c). Some of the methods described in this document can be applied to engine and APU level testing or components of those application domains.
Standard

Considerations on Ice Formation in Aircraft Fuel Systems

1964-04-20
HISTORICAL
AIR790
In the past, incidents and accidents occurred in the operation of military and civil aircraft which were attributed to the formation of ice in the engine fuel supply system resulting in intermittent or complete starvation of fuel flow. Considerable effort was devoted by many airframe companies, engine and accessory manufacturers and government agencies to study the problem of ice formation and to evolve corrective measures. By its very nature, the problem of ice formation was difficult to identify and analyze. However, corrective measures were developed which virtually eliminated serious icing problems in aircraft fuel systems. For many years incidents and accidents have not occurred on aircraft equipped with fuel heaters and/or operated with fuel containing anti-icing additive.
Standard

ELECTRICAL BONDING OF AIRCRAFT FUEL SYSTEM PLUMBING SYSTEMS

1997-01-01
HISTORICAL
AIR5128
This SAE Aerospace Information Report (AIR) is limited to the subject of aircraft fuel system plumbing systems and the questions concerning the requirements for electrical bonding of the various components of the system as related to Static Electric Charges, Electromagnectic Interference (EMI) and Lightning Strikes (Direct and Indirect Effects)
Standard

Electrical Bonding of Aircraft Fuel Systems

2017-10-20
WIP
AIR5128B
This SAE Aerospace Information Report (AIR) is limited to the subject of aircraft fuel systems and the questions concerning the requirements for electrical bonding of the various components of the system as related to Static Electric Charges, Fault Current, Electromagnetic Interference (EMI) and Lightning Strikes (Direct and Indirect Effects). This AIR contains engineering guidelines for the design, installation, testing (measurement) and inspection of electrical bonds.
Standard

Electrical Bonding of Aircraft Fuel Systems

2012-12-18
CURRENT
AIR5128A
This SAE Aerospace Information Report (AIR) is limited to the subject of aircraft fuel systems and the questions concerning the requirements for electrical bonding of the various components of the system as related to Static Electric Charges, Fault Current, Electromagnetic Interference (EMI) and Lightning Strikes (Direct and Indirect Effects). This AIR contains engineering guidelines for the design, installation, testing (measurement) and inspection of electrical bonds.
Standard

Engine Fuel System and Component Icing Test

2015-06-25
WIP
ARP6340
This ARP provides recommended practice on the considerations and methodology to demonstrate acceptable performance of the Engine components / fuel system, and APU, whilst operating throughout the flight cycle / engine duty for continuous operation with iced fuel and short duration operation with a snowshower resulting from release of accreted ice from fuel washed surfaces, where no anti-icing additives are present (e.g. Fuel System Icing Inhibitor FSII or alternative). Two scenarios must be considered when demonstrating the capability of Engine components / fuel system, and APU to operate with fuel borne ice to satisfy certification regulations applications in support of FAA Part 23 and Part 25, CFR Part 33, and corresponding EASA CS-E regulations, and equivalent Military application requirements.
Standard

FIRE TESTING OF FLUID HANDLING COMPONENTS FOR AIRCRAFT ENGINES AND AIRCRAFT ENGINE INSTALLATIONS

1996-08-01
HISTORICAL
AS4273
This document establishes requirements, test procedures, and acceptance criteria for the fire testing of fluid handling components and materials used in aircraft fluid systems. It is applicable to fluid handling components other than those prescribed by AS1055 (e.g., hoses, tube assemblies, coils, fittings). It also is applicable to materials, wiring, and components such as reservoirs, valves, gearboxes, pumps, filter assemblies, accumulators, fluid-cooled electrical/electronic components, in-flight fluid system instrumentation, hydromechanical controls, actuators, heat exchangers, and manifolds. These components may be used in fuel, lubrication, hydraulic, or pneumatic systems.
Standard

FUEL LEVEL POINT SENSING

2015-04-21
WIP
AIR6325
This Aerospace Information Report (AIR) is intended to provide comprehensive reference and background information pertaining to aircraft point level sensing
Standard

Fuel System Definitions and Glossary of Terms

2015-05-20
WIP
AIR6510
This SAE Aerospace Information Report (AIR) comprises the technical terms and nomenclature, together with their definitions and abbreviations that are used in Aircraft Fuel Systems.
Standard

Fuel System Design Considerations for Composite Based Fuel Components

2018-11-19
WIP
AIR7493
This SAE Aerospace Information Report (AIR) is a compilation of engineering design guidelines and reference data useful to ensure composite materials used in fuel system components are compatible with an aircraft fuel system. This AIR is not a complete design manual, but offers insight into key aspects of composition design that must be adequately researched and verified before being used in a fuel system.
Standard

Fuel Thermal Management Systems

2016-04-21
WIP
AIR6380
Overview of thermal management system Key requirements and design considerations for thermal management system Lessons learned
Standard

Glossary of Terms - Aircraft Ground Refueling

2015-09-23
WIP
AIR4783A
This SAE Aerospace Information Report (AIR) presents a glossary of terms commonly utilized in the ground delivery of fuel to an aircraft and some terms relating to the aircraft being refueled. The purpose of this document is to provide background material for educational purposes to persons designing, building, and using aircraft ground refueling delivery systems.
Standard

Optical equipment safety in fuel tanks

2018-11-15
WIP
ARP7977
This project aims to develop a framework of requirements which support safe installation and operation of optical devices within an aircraft fuel tank, specifically: 1: To determine optical power and energy limits which ensure safe operation of optical installations within an aircraft fuel tank over aircraft life and under all phases of flight, taking the limits provided in IEC 60079-28:20015 as a starting point. 2: To demonstrate optical and electrical power and energy equivalences, where possible. 3: To determine requirements for optical installations, including bonding and electrostatic discharge for non-conductive components such as optical fibres. 4: To provide guidelines for analysis of the hazards presented by the typical internal components of optical devices, such as failure modes of photo diodes and cells.
X