Refine Your Search

Search Results

Standard

A Process Standard for the Storage, Retrieval and Use of Three-Dimensional Type Design Data

2015-04-21
CURRENT
ARP9034A
This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.
Standard

Aerospace Guidance for Non-Deliverable Software

2019-03-05
WIP
ARP9005B
General: This document contains recommended practices for the effective control of non-deliverable software. It addresses practices for control during the development, production, release maintenance, and retirement of non-deliverable software, as well as for software procured from outside manufacturers and incorporated in the production, evaluation, test, acceptance or calibration of processes. For the purposes of this document, the terms software and non-deliverable software are considered synonymous. Application: The guidelines in this ARP apply to non-deliverable software that: - directly relates to design, manufacture, inspection, test or calibration of a deliverable product, and - directly affects the configuration, conformity or quality of a deliverable product.
Standard

Aerospace Guidance for Non-Deliverable Software

2016-06-27
CURRENT
ARP9005A
This document contains recommended practices for the effective control of non-deliverable software. It addresses practices for control during the development, production, release maintenance, and retirement of non-deliverable software, as well as for software procured from outside manufacturers and incorporated in the production, evaluation, test, acceptance or calibration of processes. For the purposes of this document, the terms software and non-deliverable software are considered synonymous.
Standard

Aerospace Series - Notice of Change (NOC) Requirements

2019-04-05
WIP
AS9116A
The aviation, space, and defense industries rely on the development and manufacture of complex products comprised of multiple systems, subsystems, and components each designed by individual designers (design activities) at various levels within the supply chain. Each design activity controls various aspects of the configuration and specifications related to the product. When a change to design information is requested or required, the change has to be evaluated against the impacts to the higher-level system. Proposed changes to design information that the design activity identifies to be minor and have no effect on their product requirements or specifications have the potential to be concurrently implemented and approved, where authorized to do so. Changes that affect customer mandated requirements or specifications shall be approved prior to implementation.
Standard

Aerospace Series - Quality Management Systems - Nonconformity Data Definition and Documentation

2019-05-31
CURRENT
AS9131D
This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract. Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
Standard

Aerospace Series - Quality Management Systems - Variation Management of Key Characteristics

2017-04-20
WIP
AS9103B
This standard is primarily intended to apply to new parts and products, but can also be applied to parts currently in production. The standard shall be applicable to all production processes, that influence the variation of KCs, as well as maintenance processes in which KCs are identified. It applies to assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product. It does not apply to lab-scale, pilot, or pre-production processes. However, particular management of some KCs might be required using other methods than those described in the standard, during these phases of a program, when required by the customer or deemed appropriate by the organization (e.g., Engineering department requirement).
Standard

Aerospace Series - Quality Management Systems Statistical Product Acceptance Requirements

2018-01-20
CURRENT
AS9138
This standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of the 9100/9110/9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.
Standard

Data Matrix Quality Requirements for Parts Marking

2005-02-16
HISTORICAL
AS9132A
This SAE Aerospace Standard (AS) defines uniform Quality and Technical requirements relative to metallic parts marking performed in using "Data Matrix symbology" used within the aerospace industry. The ISO/IEC 16022 specifies general requirements (data character encodation, error correction rules, decoding algorithm, etc.). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the following requirements to ensure electronic reading of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Electro-Chemical Etching Further marking processes will be included if required. This standard does not specify information to be encoded. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the Data Matrix Marking. Symbol position should allow optimum illumination from all sides for readability.
Standard

Direct Ship Guidance for Aerospace Companies

2019-04-05
WIP
ARP9114B
This document provides guidance to approved manufacturers, their suppliers, and customers when an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s purchase document directly to a customer, commonly known as “Direct Ship”.
Standard

Guidance for the Application of AQAP 2110 within a 9100 Quality Management System

2014-04-25
WIP
ARP9137A
This document has been prepared and issued to provide information and guidance on the application of AQAP 2110 when the Supplier adheres to the provisions of 9100. This document is published as AQAP 2009 Annex F and 9137. It was jointly developed by NATO and industry representatives for use by NATO and industry to facilitate the use and understanding of the relationship between the AQAP 2110 and 9100.
Standard

Qualification Procedure for Aerospace Standard Parts

2002-07-16
HISTORICAL
AS9133
This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to AS/EN/SJAC9100. These standards apply when called out in the aerospace standard part standard.
Standard

Quality Management Systems - Requirements for Aviation, Space, and Defense Organizations

2016-09-20
CURRENT
AS9100D
This standard includes ISO 9001:20152 quality management system requirements and specifies additional aviation, space, and defense industry requirements, definitions, and notes. It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements. If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
Standard

Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing

1999-11-01
HISTORICAL
AS9100
Standard AS9100 includes ASQ 9001:2000 quality system requirements and specifies additional requirements for the quality system of the aerospace industry. For those not involved in design activities (Ref. ASQ 9002), 4.4 is not applicable. It is emphasized that the quality system requirements specified in AS9100 are complementary (not alternative) to the contractual and applicable law and regulatory requirements. If you require the most recent version of this standard, please refer to AS9100A.
Standard

Quality Systems - Aerospace - Model for Quality Assurance in Design, Development, Production, Installation and Servicing

2001-08-01
HISTORICAL
AS9100A
Standard AS9100 includes ASQ9001:2000 quality system requirements and specifies additional requirements for the quality system of the aerospace industry. For those not involved in design activities (Ref. ASQ9002), 4.4 is not applicable. It is emphasized that the quality system requirements specified in standard AS9100 are complementary (not alternative) to the contractual and applicable law and regulatory requirements. About the AS9100 Family of Standards AS9101B, issued in March 2003, is the checklist corresponding to this standard, AS9100A.
Standard

Requirements for Aerospace Auditor Competency and Training Courses

2009-08-31
WIP
AS9104/3A
This document provides the minimum requirements (Body of Knowledge) for AQMS auditors who will participate in AQMS certification/registration activities, including the auditor authentication process and requirements for a training organization. It is applicable to auditors seeking formal approval to conduct audits of the AQMS in support of the IAQG, and those who manage the competency element of an AQMS audit program and/or training organizations.
Standard

Requirements for Development, Implementation and Control of Aerospace Auditor Training

2003-05-15
HISTORICAL
AIR5493A
This document shall be applied by course approval bodies, accreditation bodies, CRBs and other providers of training for the instruction of auditors or other professionals for specialization for the aerospace industry per the requirements of SAE AIR5359. Additionally, this document applies to all organizations qualifying Aerospace Auditors in support of Aerospace Quality Systems standards.
Standard

Requirements for Development, Implementation and Control of an Aerospace Auditor Training

2001-06-01
HISTORICAL
AIR5493
This document shall be applied by accreditation bodies, registrars and other providers of training for the instruction of auditors or other professionals for specialization for the aerospace industry per the requirements of AIR5359. Additionally, this document applies to all organizations qualifying Aerospace Auditors in support of Aerospace Quality Systems standards AS9000 and AS9100.
X