Refine Your Search

Search Results

Viewing 1 to 8 of 8
Standard

Air Cargo Pallets - Utilization Guidelines

2002-02-13
CURRENT
ARP5486
Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements of NAS 3610. This guarantees their design to be intrinsically safe for flight on board compatible aircraft types. However, actual flight safety also requires these certified pieces of equipment to be properly used: numerous occurrences have demonstrated a certified ULD can nevertheless jeopardize flight safety if loaded or restrained in an inadequate manner.
Standard

Auto Transport Unit Load Device

2002-03-22
HISTORICAL
ARP1554C
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

Auto Transport Unit Load Device

2000-05-01
HISTORICAL
ARP1554B
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

ENVIRONMENTAL DEGRADATION OF TEXTILES

1988-05-01
HISTORICAL
AIR1490A
Since the ULD device containing textiles should have a predictable service life, there should be data available so that predictions can be made. This technical report compiles available information on textiles of the types used in air cargo ULD devices and reviews the degradation characteristics of each. Textiles are used primarily in cargo restraint nets on air cargo pallets and non structural containers, restraint nets installed in cargo aircraft, and similar applications.
Standard

Tie Down, Cargo, Aircraft, CGU-1/B

2000-11-01
HISTORICAL
AS27260
This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.
Standard

Vehicle Transport Unit Load Device (ULD)

2009-12-02
CURRENT
ARP1554D
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service. It is intended that tests shall be non-destructive in nature and not result in damage unless ultimate load conditions are employed. Test equipment and methods of testing described are not meant to be restrictive. Alternate equivalent methods to accomplish the desired results may be employed. In selected cases, tests may be repeated under ultimate load conditions when required for substantiation of analytical data. If this becomes necessary, the parts deformed may be removed and replaced prior to the retest.
X