Refine Your Search

Topic

Author

Affiliation

Search Results

Event

2019-12-12
Innovative and enquiring specialists gather together 2020 SAE International Heavy-Duty Diesel Emissions Control Symposium (HDD) expand their knowledge collaborate most promising new technologies: emission control strategies, in-service maintenance, retro-fitting exhaust after-treatment equipment, global harmonization emission standards, regulatory activities
Event

2019-12-12
Innovative and enquiring specialists gather together 2020 SAE International Heavy-Duty Diesel Emissions Control Symposium (HDD) expand their knowledge collaborate most promising new technologies: emission control strategies, in-service maintenance, retro-fitting exhaust after-treatment equipment, global harmonization emission standards, regulatory activities
Article

2018-09-24
A new configuration of a rotary engine – the Szorenyi rotary engine – has been developed by the Melbourne-based Rotary Engine Development Agency (REDA). While the stator, or stationary part of the Szorenyi engine is similar to that of a Wankel engine, the geometric shape of the engine rotor is a rhombus, which deforms as it rotates inside the contour of the stator.
Article

2018-12-07
Just down the road from SAE International’s headquarters in Warrendale, Pennsylvania, Mark Sokalski has been quietly working out how to maximize piston-driven engine efficiency – with an internal combustion engine mechanism that doesn’t follow the norm.
Article

2019-04-12
Continental Aerospace Technologies is partnering with Diamond Aircraft Industries GmbH of Austria to provide a new powerplant for the DA50 general aviation aircraft. Continental also recently expanded its portfolio with a “cash and in-kind contribution” investment in Ampaire Inc., an electric aircraft and propulsion company.
Article

2019-06-11
By using three hydrogen fuel cells, the five-passenger Skai can carry up to 1,000 pounds and fly for up to four hours, or approximately 400 miles, in between 10-minute refueling periods.
Event

2019-12-12
Innovative and enquiring specialists gather together 2020 SAE International Heavy-Duty Diesel Emissions Control Symposium (HDD) expand their knowledge collaborate most promising new technologies: emission control strategies, in-service maintenance, retro-fitting exhaust after-treatment equipment, global harmonization emission standards, regulatory activities
Event

2019-12-12
Innovative and enquiring specialists gather together 2020 SAE International Heavy-Duty Diesel Emissions Control Symposium (HDD) expand their knowledge collaborate most promising new technologies: emission control strategies, in-service maintenance, retro-fitting exhaust after-treatment equipment, global harmonization emission standards, regulatory activities

2018-02-15
The U.S. Army and GM collaborate on fuel-cell-generated electricity to power the vehicle’s propulsion system and the onboard electronics, while providing off-vehicle power via an Exportable Power Take-Off unit.

2018-03-27
With successes in the 50-shp class gas turbine engine class for unmanned aerial vehicles (UAVs), UAV Turbines has reached an agreement with the U.S. Army’s Reliable Advanced Small Power Systems (RASPS) program to design, manufacture and test a 200 shp class advanced technology turbine engine.
Article

2018-03-22
LiquidPiston Inc. has developed a new engine that can run on multiple fuels, including diesel, jet fuel, and gasoline. This platform uses an optimized thermodynamic cycle and a new rotary engine architecture and could increases flight endurance over conventional UAV engines by greater than 50%.
Event

2019-12-12
Innovative and enquiring specialists gather together 2020 SAE International Heavy-Duty Diesel Emissions Control Symposium (HDD) expand their knowledge collaborate most promising new technologies: emission control strategies, in-service maintenance, retro-fitting exhaust after-treatment equipment, global harmonization emission standards, regulatory activities
Technical Paper

(Particle) Emissions of Small 2-& 4-Stroke Scooters with (Hydrous) Ethanol Blends

2010-04-12
2010-01-0794
The objectives of the present work are to investigate the regulated and unregulated (particle) emissions of a classical and modern 2-stroke and a typical 4-stroke scooter with different ethanol blend fuels. There is also comparison of two different ethanol fuels: pure ethanol (E) *) and hydrous ethanol (EH) which contains 3.9% water and is denatured with 1.5% gasoline. Special attention is paid in this research to the hydrous ethanol, since the production costs of hydrous ethanol are much less than those for (dry) ethanol. The vehicles are with carburettor and without catalyst, which represents the most frequent technology in Eastern Asia and offers the information of engine-out emissions. Exhaust emissions measurements have been performed with fuels containing ethanol (E), or hydrous ethanol (EH) in the portion of 5, 10, 15 and 20% by volume. During the test systematical analysis of particle mass (PM) and nano-particles counts (NP) were carried out.
Technical Paper

1.9-Liter Four-Cylinder HCCI Engine Operation with Exhaust Gas Recirculation

2001-05-07
2001-01-1894
We present the effect of EGR, at a set fuel flow rate and intake temperature, on the operating parameters of timing of combustion, duration of combustion, power output, thermal efficiency, and NOx emission; which is remarkably low. We find that addition of EGR at constant inlet temperature and constant fuel flow rate has little effect on HCCI parameter of start of combustion (SOC). However, burn duration is highly dependent on the amount of EGR inducted. The experimental setup at UC Berkeley uses a 1.9-liter 4-cylinder diesel engine with a compression ratio of 18.8:1 (offered on a 1995 VW Passat TDI). The engine was converted to run in HCCI mode by addition of an 18kW air pre-heater installed in the intake system. Pressure traces were obtained using four water-cooled quartz pressure transducers, which replaced the Diesel fuel injectors. Gaseous fuel (propane or butane) flowed steadily into the intake manifold.
Technical Paper

10 KWe Dual-Mode Space Nuclear Power System for Military and Scientific Applications

1992-08-03
929072
A 10 KWe dual-mode space power system concept has been identified which is based on INEL's Small Externally-fueled Heat Pipe Thermionic Reactor (SEHPTR) concept. This power system will enhance user capabilities by providing reliable electric power and by providing two propulsion systems; electric power for an arc-jet electric propulsion system and direct thrust by heating hydrogen propellant inside the reactor. The low thrust electric thrusters allow efficient station keeping and long-term maneuvering. The direct thrust capability can provide tens of pounds of thrust at a specific impulse of around 730 seconds for maneuvers that must be performed more rapidly. The direct thrust allows the nuclear power system to move a payload from Low Earth Orbit (LEO) to Geosynchronous Earth Orbit (GEO) in less than one month using approximately half the propellant of a cryogenic chemical stage.
Technical Paper

180MPa Piezo Common Rail System

2006-04-03
2006-01-0274
The challenge for the diesel engines today is to reduce harmful emissions, such as particulate matter (PM) and Nitrogen oxides (NOx), and enhance the fuel efficiency and power, which are its main advantages. To meet this challenge, DENSO has developed an advanced common rail system (CRS) that uses piezo actuated fuel injectors capable of delivering up to five injection events per combustion cycle at 180MPa, currently the world's highest commercially available diesel fuel injection pressure. The DENSO piezo injector incorporates an internally developed piezoelectric element that energizes quicker than its solenoid counterpart, thereby reducing the transition time for the start and end of the fuel injection event. The piezoelectric element and unique passage structure of the DENSO injector combine to provide a highly reliable and responsive fuel injection event.
Technical Paper

1970s Development of 21st Century Mobile Dispersed Power

1973-02-01
730709
A mobile and dispersed power system is necessary for an advanced technological-industrial society. Today's petroleum-based system discharges waste products and heat and is growing exponentially. Energy resource commitment has already intersected “ultimate” low-cost petroleum supplies in the United States and will do so for the world before 2000; this portends major changes and cost increases. The twenty-first century system for mobile-dispersed power will reflect the energy source selected to replace petroleum-for example, coal, solar insolation, or uranium. It will incorporate a fuel intermediate such as methanol, ammonia, or hydrogen, and a suitably matched “engine.” The complete change will require more than 25 years because of the magnitude, fragmentation, structural gaps, complexity, and variety of the mobile-dispersed power system.
Technical Paper

1980 CRC Fuel Rating Program - The Effects of Heavy Aromatics and Ethanol on Gasoline Road Octane Ratings

1982-02-01
821211
A gasoline Road Octane study was conducted by the Coordinating Research Council (CRC) to evaluate the effects of heavy aromatics (C9 and heavier) and ethanol content on Road Octane performance independent of Research Octane Number (RON) and Motor Octane Number (MON). Maximum-throttle and part-throttle Road ON’s were found to be well predicted by equations containing only RON and MON terms. Heavier aromatics were found to have a small adverse effect on both maximum-throttle and part-throttle Road ON independent of its direct effects on RON and MON. The all-car data did not show a significant ethanol-content effect, but eight of the thirty-seven cars did show significant effects for ethanol content.
Technical Paper

1D Modeling of Alternative Fuels Spray in a Compression Ignition Engine Using Injection Rate Shaping Strategy

2019-09-09
2019-24-0132
The Injection Rate Shaping consists in a novel injection strategy to control air-fuel mixing quality via a suitable variation of injection timing that affects the injection rate profile. This strategy has already provided to be useful to increase combustion efficiency and reduce pollutant emissions in the modern compression ignition engines fed with fossil Diesel fuel. But nowadays, the ever more rigorous emission targets are enhancing a search for alternative fuels and/or new blends to replace conventional ones, leading, in turn, a change in the air-fuel mixture formation. In this work, a 1D model of spray injection aims to investigate the combined effects of both Injection Rate Shaping and alternative fuels on the air-fuel mixture formation in a compression ignition engine. In a first step, a ready-made model for conventional injection strategies has been set up for the Injection Rate Shaping.
Technical Paper

2-Cycle Methanol LHR Engine and It's Characteristics

1994-10-01
941910
Methanol fuel was tested in a prototype 2-cycle ceramic heat insulated engine with a swirl chamber. It was found that the 2-cycle ceramic heat insulated engine with a compression ratio of 18:1 could ignite methanol without an auxiliary ignition system and emissions were substantially reduced in the whole load range.
X