Refine Your Search




Search Results

Technical Paper


CHEVROLET has made its new air-suspension system easily interchangeable in production line assembly with standard full-coil suspension by adopting a 4-link-type rear suspension with short and long arms. A feature of the system is the mounting of the leveling valves within the air-spring assemblies. These valves correct riding height continually at a moderate rate, regardless of whether the springs are leveling or operating in ride motion. The system provides constant frequency ride—ride comfort remains the same whether the car is occupied by the driver alone or is fully loaded.
Technical Paper

2-Way Driven Compressor for Hybrid Vehicle Climate Control System

The environment is one of the most important issues currently facing the world and the automobile industry is required to respond with eco-cars. To meet this requirement, the hybrid vehicle is one of the most optimal solutions. The hybrid system automatically stops engine idling (idling stop), or stops the engine during deceleration to recover energy. The engine stop however creates a problem concerning the vehicle's climate control system. Because the conventional climate control system incorporates a compressor driven by engine belt, there is almost no cooling performance while the engine is stopped. Until now, when a driver needed more cooling comfort the engine has been switched back on as a compromise measure. To realize cabin comfort that is consistent with fuel saving, a 2-way driven compressor has been developed that can be driven both by engine belt while the engine is running and by electric motor when the engine is stopped.
Technical Paper

20 A Combined Experimental and Numerical Approach for Motorcycle Crank Noise: Experimental Validation

The demands for comfort and a cleaner environment have been increasing for the past years for motorcycle as well as car manufacturers. With the need to decrease the time-to-market, there is a clear drive to apply CAE-based methods in order to evaluate new designs and to propose design changes that solve any identified problems. More specifically, the demands on the comfort of the rider are not only related to ride & handling and vibration levels(1), but also to the noise levels generated by the motorcycle. This paper presents the virtual modeling of one-cylinder engine of a motorcycle that identifies the mechanism behind the generation of an annoying noise. Furthermore, different possible design changes were evaluated in order to solve the problem. A combined experimental and numerical approach was followed to achieve this. Experiments were used to identify important parameters that determine the engine behavior and thus are critical for the modeling of such an engine.
Technical Paper

2000 HP Tractor-Trailer for the 21st Century

This paper presents the conceptual design of a high-power, high-speed tractor-trailer for severe duty applications. Design of the tractor-trailer introduces several new concepts, including the general vehicle architecture, a new electrical transmission system and a new electric tandem axle. The vehicle architecture consists of a low drag cab concept with a fully integrated turbo-generator power source, an exhaust gas electric decontamination system and auxiliaries. The electric transmission introduces a new combination of electrical machines and power electronics designed to perform under maximum load with minimum dimension, weight and price. The electric tandem axle is a new concept of an all-wheel steering independent suspension with virtual electromagnetic differential.
Technical Paper

3-D Horn

3-D horn is a vehicle to vehicle communication-based technology which helps in reducing the noise pollution, which occurs, due to honking of automobile horns by letting only the drivers of the automobile to hear the horns and not the whole environment around him. To achieve this, several relatively small horn speakers are placed inside the car. These speakers are controlled by drivers of other cars. In this way honking will be heard only by the drivers. The most unique feature of this technology is the 3-D effect caused by the speakers which will let the driver know the location of the outside car which is honking. The 3-D effect is achieved by varying the intensity and proper allotment of sound to the positioned speakers in such a way that it will give the feel of the location of the outside car to the driver. Human detection is another important feature this technology provides. It will recognize whether the horn is honked for an automobile or for a human.
Technical Paper

3D Head Models for Protective Helmet Development

In order to improve the fit and comfort of helmets, we developed digital head models that represent the anthropometric and morphometric variability found in the U.S. Navy. We analyzed the size and shape variation using two related approaches. First, we used Procrustes superimposition, which minimizes the distances between all landmarks of all subjects. This allowed us to visualize the variation in landmark distribution of the face and to test for statistical differences. Second, we extracted curvatures along the surface of the head. This allowed us to characterize the variation in the shape of the head. To create a series of sized digital models, we used principal component analysis (PCA) to organize the variation in both the traditional measurements as well as the locations of the 3D landmarks. Using an adaptation of multivariate accommodation modeling we identified representative individuals who characterize 95% of the variation in size and shape.
Technical Paper

4-Wheel-Drive Tractors From John Deere “Concepts 1982”

Today's agri-businessman is challenged to improve his efficiency to meet higher operating costs and to counter the effects of inflation. New concepts in John Deere's line of 4-wheel-drive tractors are targeted toward this goal and provide increased productivity through power increases, improved fuel economy, comfortable convenient operator environment and controls, increased hydraulic power, improved serviceability and repairability and monitoring of more critical vehicle functions.
Technical Paper

42 V Electric Air Conditioning Systems (E-A/CS) for Low Emissions, Architecture, Comfort and Safety of Next Generation Vehicles

Electrical Air Conditioning Systems for 42 V vehicles will provide many benefits in terms of Environment protection, car Architecture, cabin Comfort and overall Safety. E-A/C Systems essentially differ from conventional ones by the use of electrical compressors. First of all, they will be particularly well adapted to new powertrains, helping to make them more environmentally friendly. Accurate control and high efficiency under the most common thermal conditions will reduce the A/C impact on fuel consumption. Besides, higher sealing integrity will cut emissions of refrigerant during normal operation and maintenance. Secondly, the use of an electrically driven compressor (EDC) will suppress a belt, and will reduce the packaging constraints. This will help to design new vehicle architectures. Thirdly, the electrification of air conditioning will allow better thermal comfort. In particular, E-A/C Systems provide a good opportunity for cabin pre-conditioning.
Technical Paper

520 Bobcat Designed for Improved Serviceability

A new compact skid steer loader has been developed. Along with productivity and cost, the design of this loader was concentrated on improving ease of operation, operator comfort and safety, and serviceability. This paper discusses how serviceability was improved over previous model Bobcats. That is; improved accessibility to regulary serviced items, reduced service parts and improved reliability.
Technical Paper

6 Speed Transverse Manual Gearbox for High Torque Application

Weight reduction and high transmission efficiency demands are getting heavier to manual transmission (MT) for vehicle driving and fuel economy performance. Also comfortable shift feeling and low gear noise level are continuously required by customer because those sensitivity performances are directly recognized by driver which can determine the transmission's merchantability. Newly developed high torque capacity MT is based on serial transmission BG6 which is adopted into a lot of customer' vehicle. This new MT is weight reduced, shift feeling and gear noise performance are highly improved that keeps strong competitiveness in the future. Concerning shift feeling, its smoothness, force balance and cross shift performance are improved and optimized. Also for low gear noise performance, it was reduced to the level which can have advantage to competitor and highly comfortable for passenger vehicle. Those improvement technologies are reported as follows.
Technical Paper

64 Ergonomic Approaches to Improved Scooter Riding Comfort

This paper gives a report on ergonomic approaches we tried to scooters for improvements in their riding comfort. First we conducted investigations into riding postures that offer a comfortable scooter ride. That is, we picked out major items for the evaluation of scooter riding postures and investigated a correlation between those items and their physical quantities. Our investigation revealed that room for leg and arm movements played a major role in a scooter riding posture. We further found out a high correlation between the evaluation items for legroom and the knee angles and also high correlation between the evaluation items for legroom and the ankle angle. Next we report on the result of the attempt we made at improved riding comfort by equipping the scooter seat with a backrest. To check the effects of backrest, we measured the seating pressure distribution, myogenic potential, and cardiogenic potential.
Technical Paper

9000 Series 4WD Tractors

The 70 Series 4WD tractors offered by John Deere has been replaced by a new 9000 product line as part of the continuous improvement process to meet customer needs and provide a product with maximum value to our customers. The new model lineup is 260, 310, 360, and 425 engine HP. All models are powered by John Deere engines with the largest 3 models using the new 10.5L and 12.5L engines. The new line of 9000 Series tractors is a styled tractor family which uses many of the 8000 Series Row Crop tractor concepts and designs. This new product line provides improved operator comfort, enhanced operator conveniences, and simplified serviceability.
Technical Paper

A Case Study on the Development of the Automobile Body Industries in Indonesia

The automobile body industry in Indonesia is developed by the needs of motorized means of transportation, especially for passengers cheap enough to meet the consumer's buying power. To fill these needs, modifications on commercial vehicles into passenger vehicles or provisions for passenger space on special chassis had been carried out. It can be seen that basically body construction or modification in the automobile body industry is but an extension of the automobile industry in general. At present, commercial vehicles are designed to run with higher speeds and lower fuel consumption. This situation calls for a structure design that has to meet specifications generally applied to automobiles, so as to enable it to perform equally well with the basic vehicles.
Technical Paper

A Case for Connected Vehicles in reducing Total Cost of Ownership in Indian CV Industry

Indian automobile production increased at a CAGR of 12.2% over FY05-FY13, with a decline in Commercial Vehicle (CV) growth rate during FY09 and FY13. Globally, automotive industry suffered a decline in FY09 due to the global financial crisis and again on a decline in FY12 due to the European sovereign debt crisis. Apart from the global events, there are various internal risks the Indian OEMs need to consider: 1) regulatory risk due to excise duty hikes, decontrol of fuel pricing, etc., 2) market risks due to currency, inflation, interest rates, material cost, 3) industry risks due to increased competition, price war, etc. In this scenario, Indian Original Equipment Manufacturers (OEMs) need to constantly recalibrate their strategies to the changing market dynamics and associated risks. A research on megatrends affecting the Indian CV industry has identified more focus on Total Cost of Ownership (TCO) as one of the megatrend.
Technical Paper

A Comfort Field Study in Public Transportation Buses

In this paper the first results of a project, initiated in the University of Coimbra and dealing with the conjugated influence of multiple stressors in riding passengers, are presented. A field study was conducted in public transportation buses, in which the subjective response of the occupants was collected and the physical parameters related to thermal comfort, air quality, vibration and noise were acquired. More than 250 responses to a subjective inquire were collected. Besides questioning the occupants about how they felt the different stressors, the questionnaires also have a final question related to how they felt the global comfort of the vehicle, in a five-point scale. Even if it looks too far, the final goal of this project is to obtain an general comfort index that takes into account the influence of multiple stressors, thus giving to vehicle manufacturers a tool to evaluate the performance of their models and to improve the vehicle friendliness to passengers.
Technical Paper

A Comparative Analysis of PEV Charging Impacts -An International Perspective

Supported by generous federal incentives and customer acceptance, the number of plug-in electric vehicles (PEVs) is increasing worldwide. A PEV can be charged both at a residential or a commercial facility by connecting it to the power grid using a charging equipment. The power demand for a single PEV charging may exceed the peak power demand of an ordinary household. Hence, an increasing number of PEVs can potentially impact the power grid massively. This paper aims to quantify the impacts of an increasing number of PEVs on power distribution circuits. A comparative analysis of the PEV impacts on the North American and European distribution circuits are presented. The study also identifies the indicators representative for quantifying the grid impacts of PEV charging. The paper further intents to clarify the interface between OEMs and utilities in achieving the common goal of a successful PEV charging and therefore a faster customer acceptance.
Technical Paper

A Comparative Study to Assess the Effect and Cause of Ride Quality and Comfort of Passenger Vehicle with Subjective Correlation

Vehicle Dynamics testing has its importance in the fields of benchmarking and the validation of mathematical models built in order to predict the ride performance of the vehicle. The importance of enhancing the ride comfort is increasing day by day in present day scenario because of the long hours of driving experience. In presented work, the ride testing is done for two hatchback vehicles on highway conditions in order to compare the ride quality and ride comfort. The parameters like Vibration Dose Value, SEAT factor and Ride Diagram values are used to evaluate the ride comfort. After successful evaluation of the vibration levels affecting the ride comfort of the driver as well as the passenger the next major task is to identify and study the cause of the discomfort. The cause of the discomfort is studied and analyzed in terms of the complex motion of the vehicle. Vehicle motions like choppiness produces higher levels of discomfort as compared to the vertical movement of the vehicle.
Technical Paper

A Comparison Test of Transmissibility Response from Human Occupant and Anthropodynamic Dummy

In order to specify the human dynamic comfort of seat vibration, a lot of work has been conducted in laboratory research. From the seating manufacturer's perspective, the author proposed a test method to measure the seat ride comfort by using a spring-mass dummy which was designed to match the human response in low frequency in vertical direction. A hydraulic table was employed as the excitation source to the occupied seat. Two seat samples, both measured with human occupants before, were used for this study. For simplicity and comparison, a sweep sine signal in vertical direction was used as the excitation signal. The transmissibility results measured of the dummy loaded seat were compared to those of human occupants. In this paper, a continuing effort focused on correlating the vibration response from dummy occupied seat to that from human occupied seat. A consistent relation was shown between the two measurements.
Technical Paper

A Comparison of Numerical Techniques for the Study of Lightning Indirect Effects

A comparison of various numerical tools and techniques was performed for calculating the lightning indirect effects to composite structures and internal systems. This paper is a summary of the initial comparison results. Detailed results of each technique considered are given in additional separate papers presented during this conference. The modeling considered current distributions over and within composite surfaces and the coupling of current and voltages to internal systems such as wire bundle cables and hydraulic and fuel tubes. The models were compared to each other and to measured data from low level swept continuous wave (LLCW) tests performed on two test fixtures. Other features of the codes such as run time, ease of use, computer requirements, availability of documentation and technical support, etc. are compared as well.
Technical Paper

A Comparison of Physiology-Based Metrics to Environment-Based Metrics for Evaluating Thermal Comfort

Accurate assessment of thermal comfort requires comprehensive analysis of the environmental effects contributing to the heat transfer to and from the human body. A common comfort evaluation approach (e.g. PMV/PPD, Equivalent Temperature) is to find a direct correlation of comfort to environmental conditions (e.g. air temperature, relative humidity, clothing), thus implicitly accounting for the relationship between physiological response and thermal comfort. An alternate approach (e.g. Berkeley Comfort Model, Fiala's DTS) is to explicitly correlate comfort to basic physiological response (e.g. skin and core temperature), thereby separating the thermal analysis portion of the problem from the more subjective comfort analysis portion. While it has been shown that comparable results can be obtained between environment-based comfort metrics and physiology-based comfort metrics, the latter should be employed for optimal prediction accuracy.