Refine Your Search

Topic

Search Results

Standard

Air Cargo Pallet Extenders

2004-04-26
HISTORICAL
AS1988A
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extenders.
Standard

Air Cargo Pallet Extensions

2016-02-24
CURRENT
AS1988B
This SAE Aerospace Standard (AS) establishes the dimensional and operational requirements for pallet extension devices. It provides support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved in conjunction with pallets meeting the requirements of AS1491 plus additional pallet sizes usable with extensions.
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2018-10-16
WIP
AS36100C
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2016-06-06
CURRENT
AS36100B
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters

2005-02-10
HISTORICAL
AS36100
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0 g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Cargo Unit Load Devices – Performance Requirements and Test Parameters

2006-04-27
HISTORICAL
AS36100A
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint and occupant protection requirements of Title 14 CFR Part 25, except for the 9.0g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Air Mode Active Containers Conditioning Performance

2010-11-15
CURRENT
ARP5741
This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.
Standard

Air and Air/Surface (Platform) Cargo Pallet Nets

2002-02-24
CURRENT
AS1131C
This SAE Aerospace Standard (AS) provides dimensional, structural and environmental requirements for pallet nets to be used in conjunction with 2.44 m (8 ft) wide pallets described in AS1130. The pallet/net combination are used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be primary importance in providing serviceable, economical, and practical air transport pallet nets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.
Standard

CARGO PALLET EXTENDERS

1990-09-01
HISTORICAL
AS1988
Pallet extensions provide support for items of cargo beyond either the short or the long sides of a pallet, allowing increased volume to be achieved. The extensions are designed to suit the contour of wide-bodied aircraft. Each extension consists of a panel or shelf extending upwards and outboards within an envelope bounded by the ULD contour (see Figures 1, 2, 3, and 4). The panel or shelf is secured in this position by means of chains, cables, or structural members attached to the rails of the adjacent sides of the pallet edge.
Standard

CARGO RESTRAINT ON AIRCRAFT PASSENGER SEATS - MAIN PASSENGER CABIN

1992-10-23
HISTORICAL
ARP4049
This SAE Aerospace Recommended Practice (ARP) establishes the basic recommendations for the following two types of configuration for securing cargo to aircraft passenger seats on transport category aircraft: It is emphasized that the two types of restraint shown are merely examples of methods currently used and does not imply that alternative methods are not acceptable. For the purposes of this document, the minimum essential criteria are identified by the use of the key word "shall." Recommended criteria are identified by the use of the key word "should," and while not mandatory are considered to be of significant importance in providing safe, economical, and practical means of cargo restraint. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2002-07-15
HISTORICAL
AS5385A
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2004-11-17
HISTORICAL
AS5385B
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2017-05-08
CURRENT
AS5385D
This SAE Aerospace Standard (AS) aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22250 N (5000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain cargo on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods

2007-01-09
HISTORICAL
AS5385C
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22,250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main/upper deck cargo systems and meeting the requirements of NAS 3610 or AS36100, or b non-unitized individual pieces of cargo, or pieces of, cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Cargo Restraint on Aircraft Passenger Seats – Main Passenger Cabin

2011-12-12
CURRENT
ARP4049A
This SAE Aerospace Recommended Practice (ARP) establishes the basic recommendations for the following two types of configuration for securing cargo to aircraft passenger seats on transport category aircraft: It is emphasized that the two types of restraint shown are merely examples of methods currently used and does not imply that alternative methods are not acceptable. For the purposes of this document, the minimum essential criteria are identified by the use of the key word "shall," Recommended criteria are identified by the use of the key word "should," and while not mandatory are considered to be of significant importance in providing safe, economical, and practical means of cargo restraint. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory.
Standard

Cargo Stopper Devices

2017-02-15
CURRENT
AS6554A
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance, and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved restraint straps meeting AS5385C (TSO C-172) requirements.
Standard

Certified Containers for Lower Deck Compartments

2014-01-03
CURRENT
AS5896
This SAE Aerospace Standard (AS) covers the design, fabrication, performance, and testing requirements for general-purpose, base-restrained, containers requiring airworthiness approval for installation/use in aircraft lower deck compartments. See 10.1 and 10.2.
X