Search Results

This SAE Recommended Practice provides performance, sampling, certifying requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, refer to SAE J1204. These performance requirements apply only to wheels made of materials included in Tables 1 and 2. For wheels using composite material, refer to SAE J3204. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

This SAE Recommended Practice provides performance and sampling requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

This SAE Recommended Practice provides performance and sampling requirements, test procedures, and marking requirements for aftermarket wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For aftermarket wheels on trailers drawn by passenger cars, light trucks or multipurpose vehicles, see SAE J1204. These performance requirements apply only to wheels made of materials included in Table 1 and Table 2. New nomenclature and terms are added to clarify wheel constructions typically not used in OEM applications. The testing procedures and requirements are based on SAE standards listed in the references.

This SAE Recommended Practice provides uniform laboratory procedures for biaxial fatigue testing of wheels intended for normal highway use and temporary use on passenger car vehicles and light trucks and minimum cycle requirement for ferrous wheels for ballasted passenger car applications. The appendices provide scalable load files that are applicable to ballasted passenger cars and ballasted light trucks. A load file for unballasted passenger cars will be added to this document.

This SAE lab recommended practice may be applied to corrosion test methods such as salt spray, filiform, Corrosion creep back, etc. This procedure is intended to permit corrosion testing to be assessed between Laboratories for correlation purposes.

This SAE lab recommended practice may be applied to corrosion test methods such as salt spray, filiform, Corrosion creep back, etc. This procedure is intended to permit corrosion testing to be assessed between Laboratories for correlation purposes.

This SAE Recommended Practice provides a uniform procedure and performance requirements for evaluating fastening systems for normal highway use on aftermarket passenger cars and light trucks (except dual wheels, which are covered by SAE J1965) and multipurpose passenger vehicles. The fastening system includes the wheel, wheel bolts, and wheel nuts, as well as vehicle mating surface. The coefficients of friction for steel and aluminum mating surfaces are provided based on information available. Many factors must be considered in design and validation of wheel attachments for each specific vehicle. Where the procedure is used for original equipment applications the vehicle manufacturers specifications supersede those noted.

This SAE Recommended Practice provides minimum performance requirements and uniform procedures for nut seat system strength of wheels intended for normal highway use on passenger cars, light trucks, (except dual wheels, which are covered by SAE J1965) and multipurpose passenger vehicles. The nut seat system includes the wheel, wheel bolts, and wheel nuts as applicable. Many factors must be considered in design and validation of wheel attachments for each specific vehicle. The individual components should be evaluated per the SAE standards referenced.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating axial (lateral) curb impact collision properties of all wheels intended for use on passenger cars and light trucks.

This document provides uniform procedures and minimum performance requirements for fatigue testing pressed steel wheels intended for normal highway use on travel, camping, and boat and light utility trailers drawn by passenger cars and light trucks. For procedures and minimum performance requirements for wheels used on trucks, see SAE J267, and for wheels used on passenger cars, see SAE J328. For the application of passenger car and light truck wheels [inset less than 0.33 ft (0.10 m)] to this trailer service, use this procedure. For the application of heavier truck wheels [inset 0.33 ft (0.10 m) or more] use SAE J267. Mobile home service is outside the scope of this document. There are two basic test procedures described, a cornering fatigue test and radial fatigue test. The cornering test is directed at the wheel disc; whereas the radial test also examines the rim and attachment portion of the wheel. Both test procedures are required to obtain a thorough examination of the wheel.

This SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating certain essential characteristics of pressed steel wheels intended for use on passenger cars.

This SAE Recommended Practice provides minimum performance requirements and uniform procedures for fatigue testing of ferrous disc wheels intended for normal highway use on passenger cars, light trucks, and multipurpose passenger vehicles. For procedures and minimum performance requirements for wheels used on medium and heavy trucks, see SAE J267. For wheels used on trailers drawn by passenger cars, light trucks, or multipurpose vehicles, see SAE J1204. Wheels intended for temporary use and nonferrous road wheels are not included in this document.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating axial (lateral) curb impact collision properties of all wheels intended for use on passenger cars and light trucks. It is equivalent to ISO 7141-1981 with the exception of the Definitions section which cites SAE J393.

This SAE Recommended Practice provides uniform laboratory test procedures for evaluating certain essential characteristics of wheels intended for use on passenger cars.

This SAE Recommended Practice provides uniform procedures and minimum performance requirements for fatigue testing ferrous and aluminum wheels intended for normal highway use on travel, camping, and boat and light utility trailers drawn by passenger cars, light trucks, and multipurpose vehicles. (See Figures 1 and 2.) For procedures and minimum performance requirements for wheels used on trucks, see SAE J267, and for wheels used on passenger cars, see SAE J328. For the application of passenger car and light truck wheels [inset less than 0.10 m (0.33 ft)] to this trailer service, use this procedure. For the application of heavier truck wheels [inset 0.10 m (0.33 ft) or more] use SAE J267. Mobile home service is outside the scope of this document. There are two basic test procedures described, a cornering fatigue test and radial fatigue test. The cornering test is directed at the wheel disc; whereas the radial test also examines the rim and attachment portion of the wheel.

This SAE Recommended Practice provides uniform procedures for fatigue testing ferrous wheels intended for normal highway use on travel, camping, boat and light utility trailers drawn by passenger cars and light trucks. For performance requirements, see SAE Jxxx. For procedures and minimum performance requirements for truck-type rims and wheels, see SAE J267a and for passenger car rims and wheels see SAE J328a. Mobile home service is also outside the scope of this recommended practice. There are two basic test procedures described, a cornering fatigue test and a radial fatigue test. The cornering test is directed at the wheel portion of the wheel/rim assembly; whereas the radial test will examine potential deficiencies in the rim portion of the structure. Both test procedures are required to obtain a thorough examination of the wheel/rim assembly.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating lateral (curb) impact collision resistance of all wheels intended for use on passenger cars and light trucks.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating lateral (curb) impact collision resistance of all wheels intended for use on passenger cars and light trucks.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating lateral (curb) impact collision resistance of all wheels intended for use on passenger cars and light trucks.

The SAE Recommended Practice establishes minimum performance requirements and related uniform laboratory test procedures for evaluating lateral (curb) impact collision resistance of all wheels intended for use on passenger cars and light trucks.