Refine Your Search

Search Results

Viewing 1 to 16 of 16
Standard

Aerospace Series - Notice of Change (NOC) Requirements

2019-04-05
WIP
AS9116A
The aviation, space, and defense industries rely on the development and manufacture of complex products comprised of multiple systems, subsystems, and components each designed by individual designers (design activities) at various levels within the supply chain. Each design activity controls various aspects of the configuration and specifications related to the product. When a change to design information is requested or required, the change has to be evaluated against the impacts to the higher-level system. Proposed changes to design information that the design activity identifies to be minor and have no effect on their product requirements or specifications have the potential to be concurrently implemented and approved, where authorized to do so. Changes that affect customer mandated requirements or specifications shall be approved prior to implementation.
Standard

Aerospace Series - Notice of Change (NOC) Requirements

2014-10-30
CURRENT
AS9116
The aviation, space, and defense industries rely on the development and manufacture of complex products comprised of multiple systems, subsystems, and components each designed by individual designers (design activities) at various levels within the supply chain. Each design activity controls various aspects of the configuration and specifications related to the product. When a change to design information is requested or required, the change has to be evaluated against the impacts to the higher-level system. Proposed changes to design information that the design activity identifies to be minor and have no effect on their product requirements or specifications have the potential to be concurrently implemented and approved, where authorized to do so. Changes that affect customer mandated requirements or specifications shall be approved prior to implementation.
Standard

Aerospace Series - Quality Management Systems Statistical Product Acceptance Requirements

2018-01-20
CURRENT
AS9138
This standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of the 9100/9110/9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.
Standard

Aerospace Series - Root Cause Analysis and Problem Solving (9S Methodology)

2016-11-08
CURRENT
ARP9136
The objective of any organization, as part of continual improvement, is to reduce the number of issues (i.e., undesirable conditions, defects, failures) and to minimize their impact on quality, delivery performance, and cost. This includes having processes in place to detect and eradicate significant and recurrent issues, which implies having well identified problems, a common understanding of their impact and associated root causes, and having defined and implemented adequate actions so that these problems, including similar issues will not happen again.
Standard

Aerospace Series – Requirements for Advanced Product Quality Planning and Production Part Approval Process

2016-11-08
CURRENT
AS9145
This standard establishes requirements for performing and documenting APQP and PPAP. APQP begins with conceptual product needs and extends through product definition, production planning, product and process validation (i.e., PPAP), product use, and post-delivery service. This standard integrates and collaborates with the requirements of the 9100, 9102, 9103, and 9110 standards. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
Standard

Control of Aviation Critical Safety Items

2009-11-06
CURRENT
AS9017
This document is intended to prescribe consistent requirements for CSI management for organizations and suppliers who perform work for prime contractors receiving direct contracts from U.S. government agencies (i.e., first-tier or prime suppliers).
Standard

Data Matrix Quality Requirements for Parts Marking

2015-05-19
CURRENT
AS9132B
This standard defines uniform quality and technical requirements relative to metallic parts marking performed using "data matrix symbology" within the aviation, space, and defense industry. ISO/IEC 16022 specifies general requirements (e.g., data character encodation, error correction rules, decoding algorithm). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the requirements in this standard to ensure electronic reading of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Electro-Chemical Etching Further marking processes will be included, if required. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the data matrix marking. Symbol position should allow optimum illumination from all sides for readability. This standard does not specify information to be encoded.
Standard

Deliverable Aerospace Software Supplement for AS9100AQuality Management Systems - Aerospace - Requirements for Software (based on AS9100A)

2013-07-09
CURRENT
AS9006A
The basic requirements of AS9100A apply with the following clarifications. This document supplements the requirements of AS9100A for deliverable software. This supplement contains Quality System requirements for suppliers of products that contain deliverable embedded or loadable airborne, spaceborne or ground support software components that are part of an aircraft Type Design, weapon system, missile or spacecraft operational software and/or support software that is used in the development and maintenance of deliverable software. This includes the host operating system software including assemblers, compilers, linkers, loaders, editors, code generators, analyzers, ground simulators and trainers, flight test data reduction, etc., that directly support creation, test and maintenance of the deliverable software.
Standard

Quality Management Systems - Requirements for Aviation Maintenance Organizations

2012-04-26
HISTORICAL
AS9110B
This standard includes ISO 9001:20081 quality management system requirements and specifies additional aviation maintenance industry requirements, definitions, and notes as shown in bold, italic text. NOTE: Baseline aviation maintenance requirements originate from IAQG developed 9100:2009 standard; modifications were made, as required, to address maintenance industry specific requirements. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
Standard

Quality Management Systems - Requirements for Aviation, Space and Defense Organizations

2009-01-15
HISTORICAL
AS9100C
This standard includes ISO 9001:20081 quality management system requirements and specifies additional aviation, space and defense industry requirements, definitions and notes as shown in bold, italic text. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
Standard

Quality Management Systems - Requirements for Aviation, Space, and Defense Organizations

2016-09-20
CURRENT
AS9100D
This standard includes ISO 9001:20152 quality management system requirements and specifies additional aviation, space, and defense industry requirements, definitions, and notes. It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements. If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
Standard

Quality Management Systems Audit Requirements for Aviation, Space, and Defense Organizations

2014-03-01
HISTORICAL
AS9101E
This standard defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization's QMS documentation, and customer and statutory/regulatory requirements. The requirements in this standard are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e., ISO/IEC 17000, ISO/IEC 17021). When there is conflict with these standards, the requirements of the 9101 standard shall take precedence. NOTE 1: In this standard, the term “9100-series standards” comprises the following Aerospace Quality Management System (AQMS) standards: 9100, 9110, and 9120; developed by the IAQG and published by various national standards bodies.
Standard

Quality Management Systems – Requirements for Aviation, Space and Defense Distributors

2009-06-29
HISTORICAL
AS9120A
This standard includes ISO 9001:20081 quality management system requirements and specifies additional aviation, space and defense industry requirements, definitions and notes as shown in bold, italic text. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
Standard

Supply Chain Risk Management Guideline

2014-02-06
CURRENT
ARP9134A
Supply Chain Risk Management (SCRM), defined in this guideline, can be applied proactively for the protection of all procured products and services; both flying and non-flying through all levels of the supply chain. The guideline focuses on Quality as a key risk assessment factor taking into account elements from all aspects of the business having a direct link to global quality management. This concept/model is shown in Figure 1. While traditional “small q” Quality is a key element to be assessed, from a company business point of view, other elements play an important part in minimizing risk. This guideline defines such risk factors for consideration. SCRM as a business protection tool will be most effective when used to identify, and reduce risks when generating new business with new and existing suppliers. However, the tools and techniques described hereafter can also be applied to evaluate the existing supply chain network and determine the level of control required.
Standard

Supply Chain Risk Management Guideline

2004-03-03
HISTORICAL
ARP9134
Supply Chain Risk Management (SCRM), defined in this guideline, can be applied proactively for the protection of all procured products and services; both flying and non-flying through all levels of the supply chain. The guideline focuses on Quality as a key risk assessment factor taking into account elements from all aspects of the business having a direct link to global quality management. This concept/model is shown in Figure 1. While traditional "small q" Quality is a key element to be assessed, from a company business point of view, other elements play an important part in minimizing risk. This guideline defines such risk factors for consideration. SCRM as a business protection tool will be most effective when used to identify, and reduce risks when generating new business with new and existing suppliers. However, the tools and techniques described hereafter can also be applied to evaluate the existing supply chain network and determine the level of control required.
X