Browse Standards AMS4165
WIP 2012-01-17

Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened AMS4165

This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.<p>These extrusions have been used typically for parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not normally involve welding, but usage is not limited to such applications.<p>Certain processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
Currently unavailable for purchase at this time

This Standard is currently a WIP.