Browse Standards AMS5637
WIP 2012-01-17

Steel, Corrosion Resistant, Bars and Wire, 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn, 125 ksi (862 Mpa) Tensile Strength AMS5637

This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides.<p>These products have been used typically for small parts, such as bolts, screws, and clevis pins, requiring corrosion resistance up to 700 degrees F (371 degrees C) and which may be fabricated by heading or by machining from bars or wire and roll threading, but usage is not limited to such applications.
Currently unavailable for purchase at this time

This Standard is currently a WIP.