Steel, Corrosion Resistant, Sheet, Strip, and Plate 18cr 9.0ni (SAE 30302) Cold Rolled, 1/4 Hard, 125 Ksi (862 Mpa) Tensile Strength AMS5903A

These products have been used typically in aircraft structural components requiring moderate forming and bending during fabrication and where corrosion resistance up to 800 degrees F (427 degrees C) is required, but usage is not limited to such applications. Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-working product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.