Browse Standards AMS7287
WIP 2020-06-10

Fluorocarbon Elastomer (FKM) High Temperature / HTS Oil Resistant / Fuel Resistant Low Compression Set / 70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C) For Seals in Oil / Fuel / Specific Hydraulic Systems AMS7287

This specification covers a high temperature, compression set and fluid resistant fluorocarbon (FKM) elastomer in the form, of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications. These products have been used in contact with air and a wide variety of fuels, lubricants, specific hydraulic fluids, and a variety of gas turbine engine lubricants, including higher thermo-oxidative stability (HTS) lubricants, including those conforming to MIL-PRF-23699 Class HTS, MIL-PRF-7808 Grade 4 and AS5780 Class HPC, however usage is not limited to such applications. This material type has a typical service temperature range of -40 to +400 °F (-40 to +204 °C). These products are not suitable for use in phosphate ester based hydraulic fluids. Each application should be considered individually.
Currently unavailable for purchase at this time

This Standard is currently a WIP.