Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft
<p>This SAE Aerospace Standard (AS) defines minimum performance standards, qualification requirements, and minimum documentation requirements for passenger and crew seats in civil rotorcraft, transport aircraft, and general aviation aircraft. The goal is to achieve comfort, durability, and occupant protection under normal operational loads and to define test and evaluation criteria to demonstrate occupant protection when a seat/occupant/restraint system is subjected to statically applied ultimate loads and to dynamic impact test conditions set forth in the applicable Federal Regulations 14 CFR 23, 25, 27, or 29.</p> <p>Guidance for test procedures, measurements, equipment, and interpretation of results is also presented to promote uniform techniques and to achieve acceptable data.</p> <p>While this document addresses system performance, responsibility for the seating system is divided between the seat supplier and the installation applicant. The seat supplier's responsibility consists of meeting all the seat system performance requirements and obtaining and supplying to the installation applicant all the data prescribed by this document. The installation applicant has the ultimate system responsibility in assuring that all requirements for safe seat installation have been met. </p>
Rationale: This Aerospace Standard requires modifications, clarifications and additions to address current industry standards for aircraft and rotorcraft seats, including consideration of current regulatory standards and guidance applicable to these seats as an industry standard.