Browse Standards J200_199006
Historical Revised 1990-06-01

Classification System for Rubber Materials J200_199006

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. NOTE 1: The SAE Committee on Automotive Rubber Specifications (CARS) has the sole responsibility for SAE J200. CARS Works closely with and receives input from ASTM Subcommittee D11.30 on Classification of Rubber Compounds with the goal to keep SAE J200 and ASTM D 2000 technically equivalent. Candidate materials presented for development of new tables or for inclusion in Tables A1 or A2 of SAE J200 or Table X1.1 of ASTM D 2000 shall be initiated with the SAE CARS Committee. The procedure to be followed is detailed in Appendix C of SAE J200. NOTE 2: This document may serve many of the needs of other industries in much the same manner as SAE numbered steels. It must be remembered, however, that this system is subject to revision when required by automotive needs. It is recommended that the latest revision always be used. This document is based on the premise that all rubber materials intended for use in rubber products can be arranged into characteristic designations. These designations are determined by types, based on resistance to heat aging, and classes, based on resistance to swelling by oil. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the quality of all rubber materials. In all cases where provisions of this document would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. NOTE 3: When the rubber product is to be used for purposes where the requirements are too specific to be completely prescribed by this classification system, it is necessary for the purchaser to consult the supplier in advance to establish the appropriate properties, test methods, and specification test limits.
J200_201506
2015-06-19
Latest
Revised
J200_201112
2011-12-12
Historical
Revised
J200_200805
2008-05-15
Historical
Revised
J200_200611
2006-11-01
Historical
Revised
J200_200501
2005-01-13
Historical
Revised
J200_200311
2003-11-13
Historical
Revised
J200_200112
2001-12-10
Historical
Revised
J200_200101
2001-01-01
Historical
Revised
J200_199803
1998-03-01
Historical
Revised
J200_199704
1997-04-01
Historical
Revised
J200_199607
1996-07-01
Historical
Revised
J200_199406
1994-06-01
Historical
Revised
J200_199305
1993-05-01
Historical
Revised
J200_199206
1992-06-01
Historical
Revised
J200_199106
1991-06-01
Historical
Revised
J200_199006
1990-06-01
Historical
Revised
J200_198906
1989-06-01
Historical
Revised
J200_198802
1988-02-01
Historical
Revised
J200_198705
1987-05-01
Historical
Revised
J200_198606
1986-06-01
Historical
Revised
J200_198505
1985-05-01
Historical
Revised
J200_198401
1984-01-01
Historical
Revised
J200_198206
1982-06-01
Historical
Revised
J200J_197812
1978-12-01
Historical
Revised
J200E_196901
1969-01-01
Historical
Revised
J200A_196306
1963-06-01
Historical
Revised
J200_196205
1962-05-01
Historical
Issued

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Members save up to 18% off list price.
Login to see discount.
Special Offer: J-Paks offers a customized subscription plan that lets you pay for just the documents that you need, when you need them.

Get Involved

Want to participate in updating this standard?

X