Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment J2357_201211

Revise 1.0 Scope of document for consistency with recommended practice definition.

Updated references in 2.1.1, 2.1.2, 2.1.3, 2.1.4, 2.1.5 and 2.1.6 due to additional new references, obsolete references and updated document numbers/addresses.

Updated references in 2.2 due to updated reference information.

Section 3 removed definitions 3.7, 3.15, 3.18, 3.21, 3.25, 3.27 and revised definitions 3.2, 3.7, 3.26, 3.27.

Section 3 renumbered the section.

4.2 Removed marking reference which was not applicable.

Replaced Figure 1 with Table 1 that was an easier format to follow testing.

Completely revise 5.1 sections in order to be consistent with changes to SAE J1113, ISO and CISPR updated industry specifications.

Section 5.2 made changes to be consistent with changes to Table 1 format.

Section 5.2 revised Thermal Cycle and Thermal Shock for consistency with updated testing used in the industry.

Section 5.2 updates to reference the addition of Figure 4 previously referenced to another document.

Renumber Figure 2 to Figure 1.

Renumber Figure 3 to Figure 2.

Renumber Figure 4 to Figure 3.

Add new Figure 4 “Environmental Extreme Summary”.

Section 5.4 revised wording for clarity.

Completely revised section 6.1 revised to incorporate the changes made in 5.1. Additionally added ISO and CISPR references/requirements to updated testing procedures. Renumbered sections.

Section 6.1 ISO optional requirements added in order to have better harmonization with global documents. These documents are also referenced in the SAE J1113 document used.

Added Table 4.

Section 6.3 formerly 6.4, renumbered as part of document changes and reformatting.

Section 6.4 formerly 6.3, renumbered as part of document changes and reformatting.

Section 7 is removed as previous Rationale and replaced with new Rationale.