Harmonized Provisions for Installation of Exterior Lamps and Retro-Reflecting Devices on Road Vehicles Except Motorcycles
This SAE Recommended Practice applies to road vehicles except motorcycles. It describes the commonalities of installation requirements for lighting and light signaling devices contained in the regulatory requirements and industry standards of North America, Japan, and the widely-adopted UNECE ("European") Regulations. It does not apply to installation of lighting and light signaling devices specific to special purpose vehicles, including but not limited to police, medical and other emergency or public service vehicles.
This document does not carry force of law and does not replace regulatory requirements in effect at the time of application. It is subject to change to reflect additional experience, technical advances, and especially changes in government and industry documents used as references. Users of this document are advised to mind the applicable legal requirements in effect where their vehicles will be sold and registered.
Worldwide, there are many regulations and standards for the installation of lighting and signaling devices on road vehicles. Differences in engineering and human-factors philosophy, compliance systems, industry practice, and other factors mean the specifications for any given functions or device differ by issuing body, but all the standards have the same general intent. That is to ensure the driver can see safely in darkness or inclement weather without causing blinding glare to other drivers, and that the vehicle is adequately conspicuous with regard to its presence, position, size, direction of travel, and driver's intent to decelerate or change directions.
There are windows of overlap among the various standards for installation of each particular lighting device or function, created by cooperative effort among the various standards-issuing bodies. There are also windows of overlap among the various standards for design, construction, and performance of each particular lighting device or function, but those aspects are outside the scope of this document. The purpose of this SAE Recommended Practice is to describe the overlapped common specifications for installation of each device and function so that vehicle manufacturers can minimize the proliferation of vehicle configuration variants and associated costs. This document is intended as an international industry guide to lighting and light signaling device installation. Manufacturers installing lighting and signaling devices in accordance with this SAE Recommended Practice will maximize their ability to equip any given vehicle model with one lighting system configuration acceptable for sale in the greatest possible number of markets.
Included in: Ground Vehicle Lighting Subscription Learn More
Wipers and washers
Also known as: SAE J 2442
Subscribers can view annotate, and download all of SAE's content.
Learn More »