| Document | Title | Date | Committee |
|---|---|---|---|
| AMS5755H | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 64Ni - 5.0Cr - 24.5Mo - 5.5Fe, Solution Heat Treated This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5671J | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe, Consumable Electrode or Vacuum Induction Melted, 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable This specification covers a corrosion and heat-resistant nickel alloy in the form of bars up to 4.00 inches (101.6 mm) exclusive in nominal diameter or thickness, forgings 4.00 inches (101.6 mm) exclu... |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS7493M | Rings, Flash Welded, Ferritic and Martensitic Corrosion-Resistant Steels This specification covers flash welded rings made of ferritic and martensitic corrosion-resistant steels. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS2362E | Stress-Rupture Properties of Castings This specification establishes a procedure for designating minimum stress-rupture property requirements of castings by means of this AMS number and a series of dash numbers. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS2361F | Elevated Temperature Tensile Properties of Castings This specification establishes a procedure for designating minimum elevated temperature tensile property requirements of castings by means of this AMS number and a series of dash numbers. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AIR8480 | Safety-Security Interactions for Aircraft/System Development Generate guidance and example(s) regarding Airworthiness Security inputs to the Aircraft/System Development Processes in ARP 4754B sections 4.2 thru 4.6, and section 6. Also, clarify any essential out... |
2024-04-03 | S-18 Aircraft and Sys Dev and Safety Assessment Committee - |
| AMS5376J | Alloy, Corrosion and Heat Resistant, Investment Castings, 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N, As Cast This specification covers a corrosion and heat-resistant iron alloy in the form of investment castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5380H | Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings, 50.5Co - 26Cr - 15Ni - 6.0Mo, As-Cast This specification covers a corrosion and heat-resistant cobalt alloy in the form of investment castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5349G | Steel, Corrosion-Resistant, Investment Castings, 13Cr, Free Machining; Hardened and Tempered This specification covers a corrosion-resistant steel in the form of investment castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5365F | Castings, Sand, Corrosion and Heat Resistant, 24Cr - 20.5Ni, Solution Heat Treated This specification covers a corrosion and heat resistant steel in the form of sand castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5385J | Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings, 62Co - 27Cr - 2.8Ni - 5.5Mo, As-Cast This specification covers a corrosion and heat-resistant cobalt alloy in the form of investment castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5388L | Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW), As-Cast This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5390H | Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.6W - 18.5Fe (N-12MV) As-Cast This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5940E | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable This specification covers a cobalt-nickel-iron alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5511L | Steel, Corrosion-Resistant, Sheet, Strip, and Plate, 19Cr - 9.5Ni (304L), Solution Heat Treated This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate over 0.005 inch (0.13 mm) in nominal thickness (see 8.4). |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS5377H | Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73ni - 12cr - 4.5mo - 2.0cb - 0.70ti - 0.05c - 6.0al - 0.010b - 0.10zr, Vacuum Cast, As-Cast This specification covers a corrosion and heat-resistant nickel alloy in the form of investment castings. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| AMS2360F | Room Temperature Tensile Properties of Castings This specification establishes a procedure for designating minimum room temperature tensile property requirements of castings by means of this AMS number and a series of dash numbers. |
2024-04-03 | AMS F Corrosion and Heat Resistant Alloys Committee - |
| ARP7159 | System level Protection and Coordination in High Voltage aerospace applications The scope of this report is first to establish applicable definitions and general specification and terms prior to considering the application domain and use cases in HVDC applications. Then it will d... |
2024-04-02 | AE-10 High Voltage Committee - |
| ARP6420A | Guidelines for Characterization of Gas Turbine Engine Total-Pressure, Planar-Wave, and Total-Temperature Inlet-Flow Distortion The turbine-engine-inlet flow distortion descriptors summarized in this document apply to the effects of inlet total-pressure, planar-wave, and total-temperature distortions. Guidelines on stability m... |
2024-04-02 | S-16 Turbine Engine Inlet Flow Distortion Committee - |
| AMS3205P | Synthetic Rubber, Low-Temperature Resistant, 45-55 This specification covers a synthetic rubber in the form of sheet, strip, tubing, molded shapes, and extrusions. |
2024-04-01 | AMS CE Elastomers Committee - |
| AIR6284A | Forced Air or Forced Air/Fluid Equipment for Removal of Frozen Contaminants This SAE Aerospace Information Report (AIR) covers forced air technology including: reference material, equipment, safety, operation, and methodology. This resource document is intended to provide inf... |
2024-03-29 | G-12E Equipment Committee - |
| AMS7021A | Precipitation Hardenable Steel Alloy, Corrosion and Heat Resistant, Powder for Additive Manufacturing,15.0Cr - 4.5Ni - 3.5Cu - 0.30Nb This specification covers a corrosion and heat-resistant martensitic precipitation hardening stainless steel alloy in the form of pre-alloyed powder. |
2024-03-25 | AMS AM Additive Manufacturing Metals - |
| AMS2485M | Coating, Black Oxide This specification covers the requirements for black oxide coatings on parts. |
2024-03-25 | AMS B Finishes Processes and Fluids Committee - |
| ARP8997 | Telemetry Data Retrieval Standards for Ground Support Equipment (GSE) This SAE Aerospace Recommended Practice (ARP) describes the standards on telemetry data retrieval on ground support equipment (GSE), focusing on wiring requirements, connectors, signal definitions and... |
2024-03-22 | AGE-3 Aircraft Ground Support Equipment Committee - |
| AS85049/25C | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) SCOPE IS UNAVAILABLE. |
2024-03-22 | AE-8C1 Connectors Committee - |
| AIR6133A | Design and Safety Criteria for Passenger Boarding Stairways This SAE Aerospace Information Report (AIR) is broken into various categories for convenience and ease of identification. It is the purpose of this document to provide certain criteria for the design ... |
2024-03-22 | AGE-3 Aircraft Ground Support Equipment Committee - |
| AIR1336C | Ground Support Equipment Electrical Systems This SAE Aerospace Information Report (AIR) considers the following major areas: 1. major components and their ratings; 2. selection criteria for optimum design balance for electrical systems; 3. effe... |
2024-03-22 | AGE-3 Aircraft Ground Support Equipment Committee - |
| AIR1316C | Airline Tow Tractor - Baggage/Cargo Factors for Design Consideration This document outlines the functional and design requirements for baggage/cargo tow tractors used for airline services. |
2024-03-22 | AGE-3 Aircraft Ground Support Equipment Committee - |
| AS81969/16A | INSTALLING AND REMOVAL TOOLS, CONNECTOR, ELECTRICAL CONTACT, TYPE III, CLASS 1, COMPOSITION B Angle definitions for the following tools: - AS81969/16-01 - AS81969/16-02 - AS81969/16-03 - AS81969/16-04 |
2024-03-22 | AE-8C2 Terminating Devices and Tooling Committee - |
| ARP4378D | Current: Accumulator, Hydraulic, Welded Bellows, Factory Pre-Charged
Change to: Recommended Design and Test Requirements for Factory Precharged, Bellows Separated, Hydraulic Accumulators Current: This SAE Aerospace Recommended Practice (ARP) provides design and test requirements for high pressure, factory pre-charged, welded bellows hydraulic accumulators. Only proposed change to scop... |
2024-03-20 | A-6C4 Power Sources Committee - |
| AS1652B | Coupling Assembly, Threadless - Flexible, Fixed Cavity, Self Bonding Scope unavailable. |
2024-03-19 | G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies - |
| AS1651C | ASSEMBLED COUPLING, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING, ENVELOPE DIMENSIONS SCOPE UNAVAILABLE. |
2024-03-19 | G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies - |
| AS1578B | Bellmouth Tube End, Welding This bellmouth tube end is intended for orbiting arc welding of corrosion resistant steel hydraulic tubing per AS 1576. |
2024-03-19 | G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies - |
| AIR5665C | Architecture Framework for Unmanned Systems This SAE Aerospace Information Report (AIR) describes the Architecture Framework for Unmanned Systems (AFUS). AFUS comprises a Conceptual View, a Capabilities View, and an Interoperability View. The C... |
2024-03-19 | AS-4JAUS Joint Architecture for Unmanned Systems Committee - |
| AMS4149G | Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation Heat Treated This specification covers an aluminum alloy in the form of die and hand forgings 6.000 inches (152.00 mm) and under in nominal thickness at time of heat treatment (see 8.6). |
2024-03-18 | AMS D Nonferrous Alloys Committee - |
| AMS3277L | Sealing Compound, Polythioether Rubber, Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) This specification covers polythioether rubber fuel resistant sealing compounds supplied as a two-component system which cures at room temperature. |
2024-03-15 | AMS G9 Aerospace Sealing Committee - |
| AMS2750H | Pyrometry This specification covers pyrometric requirements for equipment used for the thermal processing of metallic materials. Specifically, it covers temperature sensors, instrumentation, thermal processing ... |
2024-03-15 | AMS B Finishes Processes and Fluids Committee - |
| AMS6532L | Steel, Bars and Forgings, and Forging Stock, 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.23 - 0.25C), Vacuum Melted, Normalized and Overaged, Precipitation Hardenable This specification covers a premium aircraft quality alloy steel in the form of bars, forgings 100 square inches (645 cm2) and under in cross-sectional area, and forging stock of any size. |
2024-03-14 | AMS E Carbon and Low Alloy Steels Committee - |
| ARP4386E | Terminology and Definitions for Aerospace Fluid Power, Actuation and Control Technologies This SAE Aerospace Recommended Practice (ARP) provides the technical terms and nomenclature, together with their definitions and abbreviations/acronyms that are used in aerospace fluid power, actuatio... |
2024-03-12 | A-6 Aerospace Actuation, Control and Fluid Power Systems - |
| AS6958 | Modernized Dynamic Cycling Test Fixture This SAE Aerospace Standard (AS) defines a modernized dynamic cycling test fixture for dynamic cycling at high and low temperature and pressure. |
2024-03-12 | AMS CE Elastomers Committee - |
| ARP6881A | Guidelines for the Use and Installation of Bonded Cable Harness Supports This ARP provides recommended use and installation procedures for bonded cable harness supports. |
2024-03-12 | AE-8A Elec Wiring and Fiber Optic Interconnect Sys Install - |
| AMECAMS2759/13 | Gaseous Nitrocarburizing This specification covers the engineering requirements for gaseous nitrocarburizing. |
2024-03-12 | AMS AMEC Aerospace Metals and Engineering Committee - |
| AMS2525F | Graphite Coating, Thin Lubricating Film, Impingement Applied This specification covers a coating consisting of finely-powdered graphite in a heat-resistant inorganic binder. |
2024-03-11 | AMS B Finishes Processes and Fluids Committee - |
| AMS2662A | Brazing, Gold-Nickel Alloy Filler Metal This specification covers the engineering requirements for producing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys using gold-nickel alloy filler metal. |
2024-03-11 | AMS B Finishes Processes and Fluids Committee - |
| AMS2664G | Brazing, Silver, for Use Up to 800 °F (427 °C) This specification covers the engineering requirements for producing brazed joints in parts made of steels, iron alloys, nickel alloys, and cobalt alloys by use of silver alloy filler metals, and the ... |
2024-03-11 | AMS B Finishes Processes and Fluids Committee - |
| AMS4013J | Aluminum Sheet, Laminated, Surface Bonded This specification covers aluminum and aluminum alloy foil in the form of laminated sheet. |
2024-03-11 | AMS D Nonferrous Alloys Committee - |
| AMS4899F | Titanium Alloy, Sheet, Strip, and Plate, 4.5AI - 3V - 2Fe - 2Mo, Annealed This specification covers a titanium alloy in the form of sheet, strip, and plate up through 4.000 inches (101.60 mm), inclusive. |
2024-03-11 | AMS G Titanium and Refractory Metals Committee - |
| AMS4131F | Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74), Solution Heat Treated and Aged This specification covers an aluminum alloy in the form of die forgings and hand forgings up to 6.000 inches (152.40 mm) in nominal thickness at the time of heat treatment (see 8.4). |
2024-03-11 | AMS D Nonferrous Alloys Committee - |
| AMS4144H | Aluminum Alloy, Hand Forgings and Rolled Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated This specification covers an aluminum alloy in the form of hand forgings 17 inches (432 mm) and under in nominal thickness, and rolled rings up to 6 inches, incl (152 mm, incl) in nominal thickness at... |
2024-03-11 | AMS D Nonferrous Alloys Committee - |
| AMS5028G | Steel, Welding Wire, 1.05Cr - 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) (D6AC), Vacuum Melted, Environment-Controlled Packaging This specification covers a low-alloy steel in the form of welding wire. |
2024-03-11 | AMS E Carbon and Low Alloy Steels Committee - |