SAE International
SAE Standards Works
SAE International
Contact Us | Help | Shopping Cart
SAE Login

E-25 General Standards for Aerospace and Propulsion Systems

Standards Status Definitions
Display:
Document List
Document Title Date Status
AIR1108 Groove Design - Metal Face Seal 2013-10-28 00:00:00.0 Reaffirmed
AIR13A FINAL REPORT ON COLD STARTING OF RECIPROCATING AIRCRAFT ENGINES 1951-10-01 00:00:00.0 Canceled
AIR1471B Torque Tightening Threaded Fasteners 2018-03-04 00:00:00.0 Stabilized
AIR1551B Torque Tightening Metric Screw Threaded Fasteners 2014-07-29 00:00:00.0 Stabilized
AIR1754A Washer, Thermal Compensating, Metric Series 2012-10-19 00:00:00.0 Reaffirmed
AIR1758A Limits and Fits - International Metric Tolerance System 2018-08-09 00:00:00.0 Stabilized
AIR18A Propeller Shaft Ends - Dual Rotation (Engine Supplied Bearing) 2012-10-19 00:00:00.0 Reaffirmed
AIR26B Number 70-90, 70L-90, 80-100, and 80L-100 Propeller Shaft Ends Dual Rotation (Propeller Supplied Bearing) 2018-04-19 00:00:00.0 Stabilized
AIR3 Survey of Operating Practices With Propeller Ice Elimination Equipment 1943-03-01 00:00:00.0 Canceled
AIR3260 Identification of Standard Utility Parts - Bolts and Nuts 2018-08-23 00:00:00.0 Reaffirmed
AIR3276 Boss - Plug/Pin, Expansion Type Hole Preparation 2012-10-19 00:00:00.0 Reaffirmed
AIR3277 Installation Procedures - Pin/Plug Expansion Type 2012-10-19 00:00:00.0 Reaffirmed
AIR39 Water Compatibility of Aircraft Greases 1955-03-01 00:00:00.0 Canceled
AIR40 Corrosion Preventative Characteristics of Aircraft Greases 1955-03-01 00:00:00.0 Canceled
AIR41 Stability of Aircraft Greases 1955-03-01 00:00:00.0 Canceled
AIR42 Contamination Studies of Aircraft Greases 1955-03-01 00:00:00.0 Canceled
AIR43 Low Temperature Torque Test for Aircraft Greases 1955-03-01 00:00:00.0 Canceled
AIR44 Load Support Characteristics of Aircraft Greases 1955-03-01 00:00:00.0 Canceled
AIR4923A Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications and Properties 2018-08-03 00:00:00.0 Revised
AIR5926 White Paper to Support Supersession of MIL-S-8879C With AS8879C 2018-08-23 00:00:00.0 Reaffirmed
AIR6553 Measurement Uncertainty and Consumer Risk 2014-10-21 00:00:00.0 Reaffirmed
AIR809B Metal Dimensional Change with Temperature 2018-03-30 00:00:00.0 Stabilized
AMS7464D Bolts and Screws, Steel, Low-Alloy Heat Resistant, 222,000 psi (1517 MPa) Tensile Strength, Hardened and Tempered, Roll Threaded 2017-08-17 00:00:00.0 Stabilized
ARP142C Assembling of Studs in Aluminum and Magnesium 2013-12-19 00:00:00.0 Stabilized
ARP1515B Threaded Fastener Protrusion Through Self-Locking Nuts 2018-01-10 00:00:00.0 Stabilized
ARP166B Propeller Clearance Envelope 2013-02-05 00:00:00.0 Stabilized
ARP169B Numbering of Aircraft Engine Cylinders 2014-09-16 00:00:00.0 Stabilized
ARP179 Involute Spline Gages (30-- Pressure Angle) 1945-06-01 00:00:00.0 Canceled
ARP179A Involute Spline Gages (30~ Pressure Angle) 1949-05-01 00:00:00.0 Canceled
ARP1902B Bolt, Tee Head, Interface Surface, Dimensions for 2018-06-18 00:00:00.0 Stabilized
ARP237B Propeller Control Clearance - Single Acting System, Single Rotation Propeller Shaft Reciprocating Engines 2013-02-05 00:00:00.0 Stabilized
ARP238B Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines 2013-02-05 00:00:00.0 Stabilized
ARP244B Propeller Control Installation Clearance 2013-02-05 00:00:00.0 Stabilized
ARP246D Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines 2018-09-11 00:00:00.0 Stabilized
ARP260E Control Lever Connections (60° V Serrations) 2018-04-28 00:00:00.0 Stabilized
ARP265A Airfoil Shapes - Dimensioning of Turbine Engine 1959-02-01 00:00:00.0 Canceled
ARP277B Propeller Attachment - Nose Mounted 2013-02-05 00:00:00.0 Stabilized
ARP2C Horsepower Correction Formulae 2018-08-09 00:00:00.0 Stabilized
ARP355B Terminology of Dual and Coaxial Counter-Rotating Propellers 2013-12-19 00:00:00.0 Stabilized
ARP365B Drives - Square Flange .600 PD Spline Accessory 2013-02-05 00:00:00.0 Stabilized
ARP373B Propeller Shaft Torque Ratings 2012-11-02 00:00:00.0 Reaffirmed
ARP375D Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing) 2013-02-05 00:00:00.0 Stabilized
ARP381B Hub, Flanged - Spline Type Wood Propeller - #10, #20 2013-02-05 00:00:00.0 Stabilized
ARP4848 Flaring (Swaging) and Removal of Shank Nuts 2018-08-23 00:00:00.0 Reaffirmed
ARP502 Propeller Shaft Ends - Flanged Small Aircraft Engine 2012-10-23 00:00:00.0 Reaffirmed
ARP510A Moment Weight of Turbine and Compressor Rotor Blades 2012-10-23 00:00:00.0 Reaffirmed
ARP671B Bearing, Ball Annular 2013-02-05 00:00:00.0 Stabilized
ARP674D Groove Design, Metal O-Ring Gasket 2018-03-30 00:00:00.0 Stabilized
ARP676A LEVER ENDS (INVOLUTE SERRATIONS) 2018-04-19 00:00:00.0 Stabilized
ARP688B Reusable Lock for Spanner Nuts 2018-04-28 00:00:00.0 Stabilized
ARP700B High Strength Elevated Temperature Bolting Practice 2018-08-23 00:00:00.0 Reaffirmed
ARP748B Gas Turbine Engine Power Take-Off Pad Requirements 2014-02-06 00:00:00.0 Stabilized
ARP843A Chip Detector, Electrical Connection, Remote Indicating 2012-11-01 00:00:00.0 Reaffirmed
ARP953C Stress Dome in Fasteners 2018-04-19 00:00:00.0 Stabilized
AS100001D Gasket - Type X or XV Engine Accessory Drive 2013-01-03 00:00:00.0 Stabilized
AS100002D Gasket - Type XI Engine Accessory Drive 2013-01-03 00:00:00.0 Stabilized
AS100003D Gasket - Type XII, XIV-A and XIV-B Engine Accessory Drive 2013-01-03 00:00:00.0 Stabilized
AS100004D Gasket - Type XIII Engine Accessory Drive 2013-01-03 00:00:00.0 Stabilized
AS100005D Gasket - Type XIV-C Engine Accessory Drive 2013-01-03 00:00:00.0 Stabilized
AS100006D Gasket - Type XVI Engine Accessory Drive 2013-01-03 00:00:00.0 Stabilized
AS100007D GASKET – TYPE XIX ENGINE ACCESSORY DRIVE 2018-04-19 00:00:00.0 Stabilized
AS100016A Lockwire, Brass 2014-07-29 00:00:00.0 Stabilized
AS100026B SAFETY WIRE - CRES AS5685 (UNS S30500) 2017-09-25 00:00:00.0 Revised
AS1050A DESIGN STANDARD, NUT, SELF-LOCKING, ACCESSORY MOUNTING 2013-02-10 00:00:00.0 Revised
AS107E Surface Finish (RMS) 2013-01-04 00:00:00.0 Stabilized
AS1105B Service Time Coding of Propulsion Engine Items 2013-01-04 00:00:00.0 Stabilized
AS1132J Bolts, Screws and Nuts - External Wrenching UNJ Thread, Inch - Design Standard 2016-02-24 00:00:00.0 Revised
AS115401B SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .1900-32 UNF-3A 2014-05-22 00:00:00.0 Stabilized
AS115451C SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .2500-28UNF-3A 2014-05-22 00:00:00.0 Stabilized
AS115501B SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .3125-24 UNF-3A 2014-05-22 00:00:00.0 Stabilized
AS115601B SCREW - FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .1900-32 UNF-3A 2014-07-08 00:00:00.0 Stabilized
AS115651B SCREW - FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .2500-28 UNF-3A 2014-05-22 00:00:00.0 Stabilized
AS115801C SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNF-3A 2015-12-06 00:00:00.0 Revised
AS115851B SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-20 UNC - 3A 2016-02-09 00:00:00.0 Revised
AS115901C SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-28 UNF – 3A 2014-05-22 00:00:00.0 Stabilized
AS115951C SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-18 UNC-3A 2014-07-08 00:00:00.0 Stabilized
AS1159C Wrenching Configuration, 12 Lobed, For Threaded Fasteners 2014-07-08 00:00:00.0 Stabilized
AS116001B SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-24 UNF-3A 2014-07-29 00:00:00.0 Stabilized
AS116051B SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-16 UNC-3A 2014-07-29 00:00:00.0 Stabilized
AS116101B SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-24 UNF-3A 2014-07-29 00:00:00.0 Stabilized
AS116901B Screw - Oval Fillister Head, .112-40 2012-02-23 00:00:00.0 Stabilized
AS116913C SCREW - OVAL FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS K00802, .1120-40 UNC - 2A 2018-06-20 00:00:00.0 Stabilized
AS116925B Screw - Oval Fillister Head, .138-32 2012-02-01 00:00:00.0 Stabilized
AS116961C Screw - Oval Fillister Drilled Head, .138-32 2012-02-01 00:00:00.0 Stabilized
AS117001B Screw - Oval Fillister Head, .164-32 2012-02-01 00:00:00.0 Stabilized
AS117041B Screw - Oval Fillister Drilled Head, .164-32 2012-02-03 00:00:00.0 Stabilized
AS1177B Nondestructive Inspection Standards for Bolts and Screws 2018-03-04 00:00:00.0 Stabilized
AS121501B Nut, Plain - Hexagon, Steel UNS G87400, Cadmium Plated, 125 ksi min 2013-10-25 00:00:00.0 Revised
AS121601B PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .125 NOM 2014-07-01 00:00:00.0 Stabilized
AS121651B PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .187 NOM 2014-07-08 00:00:00.0 Stabilized
AS121701B PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .250 NOM 2014-07-08 00:00:00.0 Stabilized
AS121751B PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .312 NOM 2014-07-08 00:00:00.0 Stabilized
AS121801B PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .375 NOM 2014-07-08 00:00:00.0 Stabilized
AS121851B PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .500 NOM 2014-08-12 00:00:00.0 Stabilized
AS122026B WASHER - LOCK, SPRING, CADMIUM PLATED 2014-07-08 00:00:00.0 Stabilized
AS122676B Pin, Straight, Headless, Steel, UNS G10950 2012-11-01 00:00:00.0 Reaffirmed
AS1229D Insert, Screw Thread, Helical Coil, Stud Locking, Performance Standard For 2018-01-02 00:00:00.0 Stabilized
AS123020A GASKET - ALUMINUM - NON ASBESTOS, ANNULAR 2014-07-08 00:00:00.0 Stabilized
AS123151A Rivet, Universal Head, High Temperature, 347 Cres UNS S34700 2012-11-01 00:00:00.0 Reaffirmed
AS123301D RIVET, SOLID, UNIVERSAL HEAD, NICKEL ALLOY, UNS N06600 2017-07-26 00:00:00.0 Revised
AS123451B Rivet, Solid, 100° Flush Head, AMS 7229 2012-11-01 00:00:00.0 Reaffirmed
AS123601C RIVET, SOLID, 100° FLUSH HEAD, NICKEL ALLOY UNS N06600 2018-04-28 00:00:00.0 Stabilized
AS123751B Pin, Cotter - CRES, UNS S30200, AS7210 2013-10-28 00:00:00.0 Reaffirmed
AS124951 Rivet - 100° Countersunk Head, Corrosion Resistant Steel 2018-08-23 00:00:00.0 Reaffirmed
AS125101C Rivet - 100° Countersunk Head, Mild Steel 2012-02-23 00:00:00.0 Stabilized
AS125251B RIVET - 100 DEGREE COUNTERSUNK HEAD, ALUMINUM ALLOY (UNS A92117) 2017-05-01 00:00:00.0 Reaffirmed
AS125401 Rivet - Universal Head, Corrosion Resistant Steel 2018-08-23 00:00:00.0 Reaffirmed
AS125551B Rivet - Universal Head, Mild Steel 2012-02-23 00:00:00.0 Stabilized
AS125701B RIVET - UNIVERSAL HEAD, ALUMINUM ALLOY (UNS A92117) 2017-05-01 00:00:00.0 Reaffirmed
AS126275C STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3125 - 18 UNS - 3A X .3125 - 24 UNF-3A 2015-04-21 00:00:00.0 Revised
AS126587B STUD - STRAIGHT, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .3750 - 16 UNS X .3750 - 24 UNF-3A 2016-02-07 00:00:00.0 Revised
AS126881A STUD - STRAIGHT, NECKED, .3750-16UNS X .3750-24UNF-3A 2013-07-09 00:00:00.0 Revised
AS127193A STUD - STRAIGHT, WAISTED, .4375-14 X .4375-20UNF-3A 2013-07-09 00:00:00.0 Revised
AS127E PROPELLER SHAFT END, FLANGED TYPE - NO. 1, 2, 3, 4, 5, & 6 2018-05-07 00:00:00.0 Stabilized
AS128363A STUD - STRAIGHT, DRILLED, .2500-20UNS X .2500-28UNF-3A 2013-07-09 00:00:00.0 Revised
AS128687A STUD - STRAIGHT, DRILLED, .3125-18UNS X .3125-24UNF-3A 2013-07-09 00:00:00.0 Revised
AS129293A STUD - WAISTED, DRILLED, .3750-16UNS X .3750-24UNF-3A 2013-07-09 00:00:00.0 Revised
AS1310B Fastener Torque for Threaded Applications, Definitions of 2018-08-23 00:00:00.0 Reaffirmed
AS131B PADS, OIL INLET AND OUTLET, TYPES I, II & III - FOR AIRPLANE CONNECTIONS AIRCRAFT ENGINES 2014-08-12 00:00:00.0 Stabilized
AS132 Pin - Taper 2002-12-16 00:00:00.0 Canceled
AS1325A Wrench Configuration, 12 Lobed Drive 2018-06-20 00:00:00.0 Stabilized
AS1337A Selected Aerospace Diameter Pitch Combinations of Metric 60° Screw Threads for Nuts and Bolts 2018-08-23 00:00:00.0 Reaffirmed
AS1338A Aerospace Metric 60° Screw Thread Profile and Tolerance Classes 2014-09-16 00:00:00.0 Stabilized
AS134 Bolt Heads, Hexagon - Large Fillet Aircraft Engine 2002-12-16 00:00:00.0 Canceled
AS1349B Insert, Screw Thread, Helical Coil, Locking (Low Friction Systems), Performance Standard for 2018-01-02 00:00:00.0 Stabilized
AS135 Screw Heads, Flat Fillister - Large Fillet Aircraft Engine 2002-12-16 00:00:00.0 Canceled
AS13572A Springs, Helical, Compression and Extension 2014-08-12 00:00:00.0 Stabilized
AS1371A Nuts, Self-Locking, Corrosion Resistant Steel, High Strength, Prevailing Torque, All Metal, 800°F (427°C) Use, UNJ Thread Form 2015-01-22 00:00:00.0 Stabilized
AS13A Magnetos, Aircraft, Drives for 2013-02-05 00:00:00.0 Stabilized
AS1414A PROPELLER SHAFT END - FLANGED 5.125(130.175) BOLT CIRCLE 2018-05-24 00:00:00.0 Stabilized
AS1421A Aerospace Selected Diameter - Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads 2010-11-16 00:00:00.0 Canceled
AS14274A Pin, Quick Release, Positive Locking, "L" Handle, Single Action, Detent Wrench/Safety Pin (Slotted) 2018-10-18 00:00:00.0 Stabilized
AS1495A Shaft Nut and Keywasher Installation Dimensions For 2012-11-01 00:00:00.0 Reaffirmed
AS150201A PIN-LOCK, STEEL 2014-02-27 00:00:00.0 Stabilized
AS150301A PIN-LOCK, BRASS 2014-07-08 00:00:00.0 Stabilized
AS150401B NUT-HEX, CHECK, UNS G87400 2014-08-12 00:00:00.0 Stabilized
AS150426D Nut - Hex, Check, AMS6320, AMS632 or AMS6325 2012-01-11 00:00:00.0 Stabilized
AS150501C STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A 2014-08-12 00:00:00.0 Stabilized
AS1508 Undercuts for Straight Screw Threads - Metric 2012-11-01 00:00:00.0 Reaffirmed
AS150801D STUD, STEPPED. 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A 2016-09-27 00:00:00.0 Revised
AS151401C STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A 2016-04-07 00:00:00.0 Revised
AS151701C STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A 2015-09-14 00:00:00.0 Revised
AS1520 Areas For Calculating Stress Or Load Values For Metric Mjexternally Threaded Fasteners 2002-07-23 00:00:00.0 Canceled
AS152601B STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A 2014-08-12 00:00:00.0 Stabilized
AS152901B STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A 2016-04-07 00:00:00.0 Revised
AS153201B STUD, STEPPED, DRILLD 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A 2014-08-12 00:00:00.0 Stabilized
AS154701B STUD - STEPPED, 2 DIA ENGAGEMENT .2500-20UNS X .1900-32UNF-3A 2017-08-09 00:00:00.0 Revised
AS155001B STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A 2016-04-07 00:00:00.0 Revised
AS155301B STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A 2016-04-07 00:00:00.0 Revised
AS1553A Performance Standard for Tube Support Loop-Cushioned Clamp 2012-11-01 00:00:00.0 Reaffirmed
AS155901B STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .5000-13 UNS X .4375-20 UNF-3A 2016-04-07 00:00:00.0 Revised
AS1560B Modules and Basic Racks of Metric Spur and Helical Gears 2018-09-11 00:00:00.0 Stabilized
AS1561A Stud, Locked In - Ring, Straight, Installation and Removal Of 2016-04-12 00:00:00.0 Revised
AS158901B STUD, STEPPED, NECKED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A 2016-04-07 00:00:00.0 Revised
AS1620 Stud, Locked In - Ring, Straight, Hole Preparation For 2012-11-01 00:00:00.0 Reaffirmed
AS162501B STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G887400, .4375-14 UNS X .3750-24 UNF-3A 2016-04-07 00:00:00.0 Revised
AS167B Chart – Humidity Indicator, Color Comparison 2018-04-28 00:00:00.0 Stabilized
AS16842A Clamp, Wire, Rope, Saddled, Single Grip, Steel 2005-08-18 00:00:00.0 Canceled
AS1701F Lubricant, Solid Film 2017-01-10 00:00:00.0 Revised
AS17184C SCREW, EXTERNALLY RELIEVED BODY, (SYNCHRO), CRES (UNS S30200 OR UNS S30300) 2014-01-07 00:00:00.0 Revised
AS172201A WASHER, KEY - SINGLE, BEARING RETAINING, AMS 8350 (ASG) 2018-05-24 00:00:00.0 Stabilized
AS172236D NUT, SPANNER, BEARING RETAINING, AERONAUTICAL, UNS G41400 2015-07-28 00:00:00.0 Stabilized
AS172271A WASHER, KEY - SINGLE, AMS 6350 (ASG) 2018-06-02 00:00:00.0 Stabilized
AS172321A Nut, Spanner, Aeronautical, UNS G41400 2012-11-01 00:00:00.0 Reaffirmed
AS176D Limits, Table of Limits and Lubrication Charts 2018-09-11 00:00:00.0 Stabilized
AS177C Operating Instructions for Aircraft Engines (Preparation of) 2018-09-11 00:00:00.0 Stabilized
AS178 Two-Speed Propeller Reduction Gear Control 1988-01-01 00:00:00.0 Canceled
AS180B Propeller Hub-Single Rotation 2018-06-18 00:00:00.0 Stabilized
AS194B Nomenclature - Engine Cooling Fan 2014-08-12 00:00:00.0 Stabilized
AS1C Altitude Graphs, Aircraft Reciprocating Engine Performance 2018-04-19 00:00:00.0 Stabilized
AS20005A DRIVE – TYPE XV ENGINE ACCESSORY - DESIGN STANDARD FOR 2018-07-16 00:00:00.0 Stabilized
AS20010A Drive - Type XX Engine Accessory - Design Standard For 2018-07-16 00:00:00.0 Stabilized
AS20253B PIN, HINGE CORROSION RESISTANT STEEL UNS S30200, UNS S30400, OR UNS S31600 2015-09-21 00:00:00.0 Revised
AS20D Definitions, Aircraft Reciprocating Engine Performance 2018-06-20 00:00:00.0 Stabilized
AS221B Gasket - Two-Bolt Exhaust Flange 2013-03-12 00:00:00.0 Stabilized
AS222B Flange - Two-Bolt Exhaust 2013-03-12 00:00:00.0 Stabilized
AS223B Flange Installation - Two-Bolt Exhaust 2013-03-12 00:00:00.0 Stabilized
AS24585C SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF 2016-07-18 00:00:00.0 Revised
AS24586C SPRING, HELICAL, EXTENSION FOR LOADS BELOW 30 POUNDS 2018-08-15 00:00:00.0 Revised
AS25109A Engines, Aircraft, Reciprocating, General Specification For 2018-06-18 00:00:00.0 Stabilized
AS25281B CLAMP, LOOP, PLASTIC, WIRE SUPPORT 2014-08-20 00:00:00.0 Stabilized
AS269J Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts 2018-08-09 00:00:00.0 Stabilized
AS291F Surface Texture, Roughness, Waviness and Lay 2014-09-05 00:00:00.0 Stabilized
AS3062C Bolts, Screws and Studs - Screw Thread Requirements 2018-08-23 00:00:00.0 Reaffirmed
AS3063B Bolts, Screws and Studs, Geometric Control Requirements 2012-11-01 00:00:00.0 Reaffirmed
AS3066B Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2013-01-04 00:00:00.0 Stabilized
AS3067B Nut, Self-Locking, Double Hexagon, Reduced Envelope, As7251 2012-11-01 00:00:00.0 Reaffirmed
AS3068A Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2012-11-01 00:00:00.0 Reaffirmed
AS3069 Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2012-11-01 00:00:00.0 Reaffirmed
AS3070 Nut, Self-Locking, Double Hexagon, Reduced Envelope, AMS 7251 2012-11-01 00:00:00.0 Reaffirmed
AS3071C Acceptance Criteria - Magnetic Particle, Fluorescent Penetrant, and Contrast Dye Penetrant Inspection 2018-10-26 00:00:00.0 Revised
AS307A Cover, Flight - Governor Mounting Pad 2018-06-20 00:00:00.0 Stabilized
AS3080 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 1.5 Dia Nom Length 2012-11-01 00:00:00.0 Reaffirmed
AS3081 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2 Dia. Nom. Length 2012-11-01 00:00:00.0 Reaffirmed
AS3082 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 2.5 Dia. Nom. Length 2012-11-01 00:00:00.0 Reaffirmed
AS3083 Insert - Cres Helical Coil Fine Thread, Straight Stud Locking, 3 Dia. Nom. Length 2012-11-01 00:00:00.0 Reaffirmed
AS3086B STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400, .1900-32 UNJF-3A X .1900-32 UNJF-3A 2016-01-08 00:00:00.0 Revised
AS3087B STUD - STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400, .2500-28 UNJF-3A X .2500-28 UNJF-3A 2016-01-08 00:00:00.0 Revised
AS3088B STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400, .3125-24 UNJF-3A X .3125-24 UNJF-3A 2016-01-08 00:00:00.0 Revised
AS3089B STUD, STRAIGHT, KEY LOCKED, CADMIUM PLATED, STEEL, UNS G87400, .3750-24 UNJF-3A X .3750-24 UNJF-3A 2016-01-09 00:00:00.0 Revised
AS3090A STUD - STRAIGHT, KEY LOCKED, CRES UNS S66286 .1900-32 UNJF X .1900-32 UNJF 2018-09-04 00:00:00.0 Revised
AS3091 Stud - Straight, Key Locked, Cres AMS 5731, .250-28 UNJF X .250-28 UNJF 2012-11-01 00:00:00.0 Reaffirmed
AS3092 Stud - Straight, Key Locked, Cres AMS 5731, .3125-24 UNJF X .3125-24 UNJF 2012-11-01 00:00:00.0 Reaffirmed
AS3093A Stud - Straight, Key Locked, Cres AMS 5731, .375-24 UNJF X .375-24 UNJF 2018-11-02 00:00:00.0 Revised
AS3094A INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 1.5 DIA NOM LENGTH 2016-05-13 00:00:00.0 Revised
AS3095A INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 2 DIA NOM LENGTH 2018-08-30 00:00:00.0 Revised
AS3096A Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length 2018-08-30 00:00:00.0 Revised
AS3097A Insert - Cres Helical Coil Fine Thread, Locking (Low Friction Systems) 3 Dia Nom Length 2018-08-28 00:00:00.0 Revised
AS3098 Screw, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .164-36 UNJF-3A 2012-11-01 00:00:00.0 Reaffirmed
AS3099 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .190-32 UNJF-3A 2012-11-01 00:00:00.0 Reaffirmed
AS3100 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .250-28 UNJF-3A 2012-11-01 00:00:00.0 Reaffirmed
AS3101 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .3125-24 UNJF-3A 2012-11-01 00:00:00.0 Reaffirmed
AS3102 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .375-24 UNJF-3A 2012-11-01 00:00:00.0 Reaffirmed
AS3103 Bolt, Machine - Hexagon Head, PD Shank, Cres AMS 5731, .4375-20 UNJF-3A 2012-11-01 00:00:00.0 Reaffirmed
AS3104A BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CRES AMS5731, .5000-20 UNJF-3A 2013-09-26 00:00:00.0 Revised
AS3105 Bolt, Machine - Hexagon Head, Pd Shank, Cres Ams 5731, .5625-18 Unjf-3a 2012-11-01 00:00:00.0 Reaffirmed
AS3106A SCREW, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731(UNS S66286), .1640-36 UNJF-3A 2014-05-22 00:00:00.0 Revised
AS3107A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .1900-32 UNJF-3A 2014-05-22 00:00:00.0 Revised
AS3108A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66826), .2500-28 UNJF-3A 2014-08-20 00:00:00.0 Revised
AS3109A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .3125-24 UNJF-3A 2014-11-06 00:00:00.0 Revised
AS3110A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .3750-24 UNJF-3A 2014-11-06 00:00:00.0 Revised
AS3111A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731(UNS S66826), .4375-20 UNJF-3A 2014-07-07 00:00:00.0 Revised
AS3112A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731, .5000-20 UNJF-3A 2013-09-26 00:00:00.0 Revised
AS3113A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .5625-18 UNJF-3A 2014-11-06 00:00:00.0 Revised
AS3114A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS5731, .190-32 UNJF-3A 2015-08-24 00:00:00.0 Revised
AS3115A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS5731, .250-28 UNJF-3A 2015-08-24 00:00:00.0 Revised
AS3116A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .3125-24 UNJF-3A 2014-03-06 00:00:00.0 Revised
AS3117A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .375-24 UNJF-3A 2014-03-06 00:00:00.0 Revised
AS3118A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .4375-20 UNJF-3A 2014-03-06 00:00:00.0 Revised
AS3119A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS5731, .5000-20 UNJF-3A 2013-09-26 00:00:00.0 Revised
AS3120A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731, UNS S66286, .5625-18 UNJF-3A 2015-03-12 00:00:00.0 Revised
AS3121A PLUG, EXPANSION, ALUMINUM, 2024-T4 AND 2024-T351, LONG; STD AND .010 OVERSIZE DIAMETERS (UNS A92024) 2014-04-24 00:00:00.0 Reaffirmed
AS3122A PIN, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, LONG (UNS A92024) 2014-04-24 00:00:00.0 Reaffirmed
AS3123A PLUG, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS A92024 2014-04-24 00:00:00.0 Reaffirmed
AS3124A PIN, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT, UNS A92024 2014-04-24 00:00:00.0 Reaffirmed
AS3125B PLUG, EXPANSION - CRES, 416 OR 416SE, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623 2014-01-07 00:00:00.0 Revised
AS3126B PIN, EXPANSION - CRES, 416 OR 416SE, LONG, UNS S41600/UNS S41623 2014-01-07 00:00:00.0 Revised
AS3127B PLUG, EXPANSION - CRES, 416 OR 416SE, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623 2014-01-07 00:00:00.0 Revised
AS3128B PIN, EXPANSION - CRES, 416 OR 416SE, SHORT, UNS S41600/UNS S41623 2014-01-07 00:00:00.0 Revised
AS3129B PLUG, EXPANSION - CRES, 303, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S30300 2014-01-07 00:00:00.0 Revised
AS3130B PIN, EXPANSION - CRES, 303, LONG, UNS S30300 2014-01-07 00:00:00.0 Revised
AS3131B PLUG, EXPANSION - CRES, 303, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S30300 2014-01-07 00:00:00.0 Revised
AS3132B PIN, EXPANSION - CRES, 303, SHORT, UNS S30300 2014-01-07 00:00:00.0 Revised
AS3139B STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731 .250-28 UNJF-3A X .190-32 UNJF-3A 2014-12-15 00:00:00.0 Revised
AS3140B STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731 .3125-24 UNJF-3A X .250-28 UNJF-3A 2014-12-15 00:00:00.0 Revised
AS3141B STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731, .3750-24 UNJF-3A X .3125-24 UNJF-3A 2015-01-15 00:00:00.0 Revised
AS3142B STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731 .4375-20 UNJF-3A X .3750-24 UNJF-3A 2014-12-15 00:00:00.0 Revised
AS3143B STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731 .5000-20 UNJF-3A X .4375-20 UNJF-3A 2014-12-15 00:00:00.0 Revised
AS3144A STUD, STEPPED 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731, .5625-18 UNJF-3A X .500-20 UNJF-3A 2015-08-24 00:00:00.0 Revised
AS3147A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .1900-32 UNJF-3A 2013-06-17 00:00:00.0 Revised
AS3148A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .2500-28 UNJF-3A 2013-06-17 00:00:00.0 Revised
AS3149A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .3125-24 UNJF-3A 2013-06-17 00:00:00.0 Revised
AS3150A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI .3750-24 UNJF-3A 2013-06-17 00:00:00.0 Revised
AS3151A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .4375-20 UNJF-3A 2013-06-17 00:00:00.0 Revised
AS3152A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .5000-20 UNJF-3A 2013-06-17 00:00:00.0 Revised
AS3153A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .5625-18, UNJF-3A 2013-06-17 00:00:00.0 Revised
AS3156A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .190-32 UNJF-3A 2014-08-20 00:00:00.0 Revised
AS3157A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .250-28 UNJF-3A 2014-08-20 00:00:00.0 Revised
AS3158A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .3125-24 UNJF-3A 2014-08-20 00:00:00.0 Revised
AS3159B BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HD, DRILLED, CLOSE TOLERANCE SHANK, TI ALLOY, UNS R56400, 160 KSI MIN .3750-24, UNJF-3A 2018-04-24 00:00:00.0 Revised
AS3160A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .4375-20 UNJF-3A 2014-10-08 00:00:00.0 Revised
AS3161A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .500-20 UNJF-3A 2014-10-08 00:00:00.0 Revised
AS3162A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, AMS 4967, .5625-18 UNJF-3A 2014-10-08 00:00:00.0 Revised
AS3163A NUT, PLAIN - O.D. SLOTS, KEY WASHER LOCKED, LOW ALLOY STEEL (SAE 8740), AS8879 2016-01-15 00:00:00.0 Revised
AS3167A BOLT, MACHINE-DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI UTS MIN, .1900-32, UNJF-3A 2015-02-05 00:00:00.0 Revised
AS3168A BOLT, MACHINE-DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI UTS MIN, .2500-28, UNJF-3A 2015-03-09 00:00:00.0 Revised
AS3169A BOLT, MACHINE-DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140KSI UTS MIN, .3125-24, UNJF-3A 2015-03-09 00:00:00.0 Revised
AS3170A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), . 3750-24, UNJF-3A 2013-09-13 00:00:00.0 Revised
AS3171A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), .4375-20, UNJF-3A 2013-09-13 00:00:00.0 Revised
AS3172A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20, UNJF-3A 2013-10-04 00:00:00.0 Revised
AS3173A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS5643 (UNS S17400), 140 KSI, .5625-18, UNJF-3A 2013-09-13 00:00:00.0 Revised
AS3174A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .1900-32 UNJF-3A 2014-01-07 00:00:00.0 Revised
AS3175A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, 2500-28 UNJF-3A 2014-01-07 00:00:00.0 Revised
AS3176A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3125-24 UNJF-3A 2014-01-09 00:00:00.0 Revised
AS3177A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3750-24 UNJF-3A 2014-02-21 00:00:00.0 Revised
AS3178A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .4375-20 UNJF-3A 2014-02-27 00:00:00.0 Revised
AS3179A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20 UNJF-3A 2014-04-03 00:00:00.0 Revised
AS3180A BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5625-18 UNJF-3A 2014-04-03 00:00:00.0 Revised
AS3214A WIRE, SAFETY-STEEL, CORROSION AND HEAT RESISTANT, AMS5689 2015-02-24 00:00:00.0 Stabilized
AS3215B RING, RETAINING-SPIRAL, INTERNAL, HEAVY DUTY, CRES (UNS S30200) 2018-03-13 00:00:00.0 Revised
AS3216C RING, RETAINING-SPIRAL, EXTERNAL, HEAVY DUTY, CRES (UNS S30200) 2018-11-02 00:00:00.0 Revised
AS3217A Ring, Retaining-Spiral, Internal, Light Duty, Cres 2012-11-01 00:00:00.0 Reaffirmed
AS3218A Ring, Retaining-Spiral, External, Light Duty, Cres 2012-11-01 00:00:00.0 Reaffirmed
AS3219A Ring, Retaining, Spiral, Minimum Distortion, Dimensional and Acceptance Standard For 2012-11-01 00:00:00.0 Reaffirmed
AS3221C COVER – ENGINE ACCESSORY DRIVE, SQUARE, 2.653 BOLT CIRCLE, AMS4490 (UNS M11910) 2018-07-16 00:00:00.0 Stabilized
AS3222D Cover - Engine Accessory Drive, Square, 5.000 Bolt Circle, AMS4490 (UNS M11910) 2018-10-18 00:00:00.0 Stabilized
AS3223C Cover - Engine Accessory Drive, Round, 5.000 Bolt Circle, AMS4490 (UNS M11910) 2018-07-16 00:00:00.0 Stabilized
AS3224C Cover - Engine Accessory Drive, Round, 8.000 Bolt Circle, AMS4490 (UNS M11910) 2018-06-20 00:00:00.0 Stabilized
AS3225D Cover - Engine Accessory Drive, Round, 10.000 Bolt Circle, AMS4490 (UNS M11910) 2018-04-28 00:00:00.0 Stabilized
AS3228A Rivet - Tubular, Countersunk, AS7228 2012-11-01 00:00:00.0 Reaffirmed
AS3229B RIVET - TUBULAR, UNIVERSAL, AS7228 2018-04-28 00:00:00.0 Revised
AS3230B RIVET - TUBULAR, COUNTERSUNK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N06600) 2015-03-01 00:00:00.0 Revised
AS3231B RIVET - TUBULAR, UNIVERSAL 2017-03-21 00:00:00.0 Revised
AS3232B BOLT, TEE HEAD - CHAMFERED AMS5708 (UNS N07001) 165 KSI MIN UTS .1900-32-UNJF-3A 2013-03-28 00:00:00.0 Revised
AS3233A BOLT, TEE HEAD - CHAMFERED, PD SHANK, NICKEL ALLOY, 165 KSI MIN UTS .2500-28 UNJF-3A 2013-03-28 00:00:00.0 Revised
AS3234A BOLT, TEE HEAD - CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001), 165 KSI MIN UTS .3125-24 UNJF-3A 2013-03-28 00:00:00.0 Revised
AS3235C BOLT, TEE HEAD - CHAMFERED, PD SHANK NICKEL ALLOY (UNS N07001),165 KSI MIN UTS .3750-24 UNJF-3A 2013-03-28 00:00:00.0 Revised
AS3236D Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi min, .1900-32 UNJF-3A 2017-03-21 00:00:00.0 Revised
AS3237D BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A 2015-12-19 00:00:00.0 Revised
AS3238D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A 2017-03-14 00:00:00.0 Revised
AS3239E BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A 2017-03-21 00:00:00.0 Revised
AS3240D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A 2017-04-13 00:00:00.0 Revised
AS3241D BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A 2017-10-03 00:00:00.0 Revised
AS3242D BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A 2017-10-03 00:00:00.0 Revised
AS3243D BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY,UNS N07718, 185 KSI UTS MIN, .1900-32 UNJF-3A 2017-11-09 00:00:00.0 Revised
AS3244C BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN UTS, .2500-28 UNJF-3A 2017-04-27 00:00:00.0 Reaffirmed
AS3245D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A 2018-04-19 00:00:00.0 Revised
AS3246D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A 2015-02-10 00:00:00.0 Revised
AS3247D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A 2018-07-02 00:00:00.0 Revised
AS3248D Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Nickel Alloy, UNS N07718, 185 ksi Min, .5000-20 UNJF-3A 2018-09-04 00:00:00.0 Revised
AS3249C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A 2013-03-25 00:00:00.0 Revised
AS3250D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A 2018-07-02 00:00:00.0 Revised
AS3251D Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 ksi Min, .2500-28 UNJF-3A 2018-11-02 00:00:00.0 Revised
AS3252D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3125-24 UNJF-3A 2013-07-18 00:00:00.0 Revised
AS3253C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .3750-24 UNJF-3A 2013-02-10 00:00:00.0 Revised
AS3254C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A 2013-04-02 00:00:00.0 Revised
AS3255C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A 2013-02-10 00:00:00.0 Revised
AS3256C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A 2013-04-02 00:00:00.0 Revised
AS3261B NUT, SELF-LOCKING, CLIP, FLOATING, AS7251 (UNS S66286) 2015-07-11 00:00:00.0 Stabilized
AS3262B NUT, SELF-LOCKING, PLATE - 2 LUG, FLOATING, COUNTERBORED, UNS S66286 2013-06-27 00:00:00.0 Revised
AS3265 Washer - Flat Load Spreading, Metric, AMS 5525 2012-11-01 00:00:00.0 Reaffirmed
AS3272A NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 700 °F, DRY FILM COATED, UNS S66286, UNJ THREAD 2014-01-07 00:00:00.0 Revised
AS3273A NUT - SELF-LOCKING, CLINCH, SERRATED SHANK, 1200 °F, SILVER PLATED, UNS S66286, UNJ THREAD 2014-01-07 00:00:00.0 Revised
AS3291A NUT, SELF-LOCKING, DOUBLE HEXAGON, AMS5709 (UNS N07001), 180 KSI 2013-06-27 00:00:00.0 Revised
AS33 Nuts, Plain Hexagon - Aircraft Engine 2002-07-23 00:00:00.0 Canceled
AS3303A BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS5708, .190-32 UNJF-3A 2014-11-25 00:00:00.0 Revised
AS3307A BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS5708, .250-28 UNJF-3A 2014-12-05 00:00:00.0 Revised
AS3308A BOLT, MACHINE - HEXAGON HEAD, PD SHANK, AMS5708, .3125-24 UNJF-3A 2014-11-25 00:00:00.0 Revised
AS3309B BOLT, MACHINE – HEXAGON HEAD, PD SHANK, AMS5708, .3750-24 UNJF-3A 2016-10-16 00:00:00.0 Revised
AS3319E STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .190-24UNJC X .190-32UNJF 2014-07-07 00:00:00.0 Revised
AS3320E STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF 2014-07-07 00:00:00.0 Revised
AS3321E STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .3125-18UNJC X .3125-24UNJF 2014-07-07 00:00:00.0 Revised
AS3322E STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .375-16UNJC X .375-24UNJF 2014-07-07 00:00:00.0 Revised
AS3326B NUT, SELF-LOCKING-CAPTIVE WASHER, STEEL 2017-09-07 00:00:00.0 Revised
AS338 Shipping Containers - Aircraft Engines and Components 1988-01-01 00:00:00.0 Canceled
AS3397A NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, AS7251 (UNS S66286) 2015-12-19 00:00:00.0 Revised
AS339B Cover - Shipping Container Log Data and Inspection Port 2013-01-04 00:00:00.0 Stabilized
AS3400A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A 2015-01-09 00:00:00.0 Revised
AS3401A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A 2015-01-15 00:00:00.0 Revised
AS3402A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .3125-24 UNJF-3A 2015-02-10 00:00:00.0 Revised
AS3403A BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, AMS5708 (UNS N07001), .3750-24 UNJF-3A 2015-03-26 00:00:00.0 Revised
AS3404A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A 2015-08-21 00:00:00.0 Revised
AS3405A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .2500-28 UNJF-3A 2015-09-07 00:00:00.0 Revised
AS3406A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .3125-24 UNJF-3A 2015-12-27 00:00:00.0 Revised
AS3407A BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .3750-24 UNJF-3A 2015-12-19 00:00:00.0 Revised
AS3409A Bolt, Tee Head - AMS5662, Chamfered, PD Shank, .1900-32 UNJF-3A (Stress Rupture Resistant) 2018-08-23 00:00:00.0 Reaffirmed
AS340A Cover - Shipping Container Inspection Port 2014-08-12 00:00:00.0 Stabilized
AS3410B Bolt, Tee Head - AMS5662, Chamfered, .250-28 UNJF-3A (Stress Rupture Resistant) 2018-08-23 00:00:00.0 Reaffirmed
AS3411D BOLT, TEE HEAD - AMS5662, CHAMFERED, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) 2018-04-28 00:00:00.0 Revised
AS3412B Bolt, Tee Head - AMS5662, Chamfered, .375-24UNJF-3A (Stress Rupture Resistant) 2018-08-23 00:00:00.0 Reaffirmed
AS3413B BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT) 2016-09-12 00:00:00.0 Revised
AS3414B BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT) 2016-10-16 00:00:00.0 Revised
AS3415B BOLT, MACHINE – HEXAGON HEAD, PD SHANK UNS NO7718, 185 KSI MIN, .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) 2016-12-14 00:00:00.0 Revised
AS3416B BOLT, MACHINE – HEXAGON HEAD, PD SHANK UNS NO7718, 185 KSI MIN, .3750-24 UNJF-3A (STRESS RUPTURE RESISTANT) 2017-01-04 00:00:00.0 Revised
AS3417B Bolt, Machine, Double Hex Extended Washer Head, Close Tolerance Shank, UNS N07718, .1900-32 UNJF-3A (Stress Rupture Resistant) 2017-03-30 00:00:00.0 Revised
AS3418B BOLT, MACHINE, DOUBLE HEX, EXT WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN, .2500-28UNJF-3A (STRESS RUPTURE RESISTANT) 2017-06-29 00:00:00.0 Revised
AS3419C BOLT, MACHINE,DOUBLE HEX, EXT WASHER HEAD, CLOSE TOL. SHANK, UNS N07718, 185 KSI MIN .3125-24 UNJF-3A (STRESS RUPTURE RESISTANT) 2017-04-06 00:00:00.0 Revised
AS3420B Bolt, Machine, Double Hex Ext Washer Head, Close Tolerance Shank, UNS N07718, .3750-24 UNJF-3A (Stress Rupture Resistant) 2017-03-30 00:00:00.0 Revised
AS3435 Spacer, Sleeve - For .190 Inch Bolt, AMS4901 or AMS4921 2018-08-23 00:00:00.0 Reaffirmed
AS3436 Spacer, Sleeve - For .250 Inch Bolt, AMS4901 or AMS4921 2018-08-23 00:00:00.0 Reaffirmed
AS3472A Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286 2018-08-23 00:00:00.0 Reaffirmed
AS3477B NUT, SELF LOCKING - DOUBLE HEXAGON, EXTENDED WASHER, UNS S66286, SILVER PLATED, UNJ THREAD 2013-07-16 00:00:00.0 Revised
AS3478D NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F 2013-07-16 00:00:00.0 Revised
AS3479F NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F 2016-01-15 00:00:00.0 Revised
AS3480D Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 °F 2014-10-08 00:00:00.0 Revised
AS3481G NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F 2015-08-14 00:00:00.0 Revised
AS3482D NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F 2014-08-20 00:00:00.0 Revised
AS3483B NUT, SELF LOCKING, HEXAGON, REGULAR HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F 2014-08-20 00:00:00.0 Revised
AS3485A NUT, SELF-LOCKING, 12 POINT, REDUCED HEIGHT, SILVER PLATE, UNS S66286 2014-10-06 00:00:00.0 Revised
AS3486D NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 KSI/800 °F 2015-04-28 00:00:00.0 Reaffirmed
AS3490A STUD-STEPPED, 1.5 DIA ENGAGEMENT, .375-16 UNJC-3A MOD X .3125-24 UNJF-3A (UNS S66286) 2015-03-01 00:00:00.0 Revised
AS3491A GASKET - TYPE X OR XV ENGINE ACCESSORY DRIVE 2013-12-19 00:00:00.0 Stabilized
AS3492A GASKET - TYPE XI ENGINE ACCESSORY DRIVE 2014-01-02 00:00:00.0 Stabilized
AS3493A GASKET - TYPE XII, XIV A AND XIV B ENGINE ACCESSORY DRIVE 2014-01-02 00:00:00.0 Stabilized
AS3494A GASKET - TYPE XIII ENGINE ACCESSORY DRIVE 2014-02-13 00:00:00.0 Stabilized
AS3495A GASKET - TYPE XIV-C ENGINE ACCESSORY DRIVE 2014-02-13 00:00:00.0 Stabilized
AS3496A GASKET - TYPE XVI ENGINE ACCESSORY DRIVE 2014-01-09 00:00:00.0 Stabilized
AS3497A GASKET - TYPE XIX ENGINE ACCESSORY DRIVE 2014-01-09 00:00:00.0 Stabilized
AS3498A GASKET - ENGINE ACCESSORY DRIVE 2014-01-09 00:00:00.0 Stabilized
AS3502 INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286 2014-04-24 00:00:00.0 Reaffirmed
AS3503 INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED, SELF-BROACHING KEYS, OVERSIZE UNS S66286 2014-04-24 00:00:00.0 Reaffirmed
AS3504C INSERT - THIN WALL, SHORT, SELF-LOCKING, 1025 °F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD 2018-04-24 00:00:00.0 Revised
AS3505C INSERT - THIN WALL, LONG, SELF-LOCKING, 1025 °F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD 2018-05-07 00:00:00.0 Revised
AS3506B Insert - Screw Thread, Thin Wall, Self-Locking, UNS N07718, Silver Plated, Class: 185 ksi/1025 °F, Procurement Specification 2014-02-21 00:00:00.0 Revised
AS3507B Insert - Thin Wall, Self-Locking Short and Long Length Installation and Removal of 2018-08-23 00:00:00.0 Reaffirmed
AS3508A INSERT - THIN WALL, SHORT AND LONG HOLE PREPARATION FOR 2014-05-22 00:00:00.0 Revised
AS3509B Cable, Safety, Kit, Nickel Alloy, UNS N0660 2018-08-23 00:00:00.0 Reaffirmed
AS3510C CABLE, SAFETY, KIT, CORROSION AND HEAT RESISTANT STEEL, UNS S32100 2016-04-20 00:00:00.0 Revised
AS3511B Cable, Safety, Kit - Corrosion Resistant Steel, UNS S30400 2018-08-23 00:00:00.0 Reaffirmed
AS3528 Bolt, Shear - Double Hex Head, Uns S66286 - 160 Ksi 2012-11-01 00:00:00.0 Reaffirmed
AS3529 Bolt, Shear - Double Hex Head, Drilled Shank Uns S66286 - 160 Ksi 2012-11-01 00:00:00.0 Reaffirmed
AS3530A Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, UNS S66286 - 160 ksi 2018-08-28 00:00:00.0 Revised
AS3531A Bolt, Machine - Double Hex Extended Washer Head, Close Tolerance Shank, Drilled Head, Uns S66286 - 160 Ksi 2018-09-28 00:00:00.0 Revised
AS3532 Bolt, Shear - Double Hex Head, Drilled Shank Uns N07718 - 185 Ksi 2012-11-01 00:00:00.0 Reaffirmed
AS3534B Nut, Self-Locking, Shank, UNS S66286 Silver Plate on Thread Only, UNJ Thread 2018-09-04 00:00:00.0 Revised
AS3535B NUT, SELF-LOCKING, SHANK, UNS N07001 SILVER PLATE, UNJ THREAD 2014-09-23 00:00:00.0 Revised
AS3542A COVER - TYPE XVI, XVII-C, D, E, AND F ENGINE ACCESSORY DRIVE 2018-06-20 00:00:00.0 Stabilized
AS3543 Stud, Locked in, Key locked, UNS S66286, 140 ksi/1200°F, Lightweight, Self-Broaching Keys 2012-11-01 00:00:00.0 Reaffirmed
AS3544 Stud, Locked in, Key Locked, UNS S66286, 140 ksi/1200°F, Heavy-Duty, Self-Broaching Keys 2012-11-01 00:00:00.0 Reaffirmed
AS3545 Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286 2012-11-01 00:00:00.0 Reaffirmed
AS3546A Insert, Screw Thread, Self-Locking, Locked In, Key Locked, Extra Heavy Duty, Self-Broaching Keys, UNS S66286 2018-08-23 00:00:00.0 Reaffirmed
AS3547A ASSEMBLY NUT AND CLIP, REMOVABLE SELF-LOCKING NUT, UNS S66286 2016-07-22 00:00:00.0 Revised
AS3548A BASKET, REMOVABLE SELF-LOCKING NUT, UNS S66286 2016-07-22 00:00:00.0 Revised
AS3549A SLEEVE, REMOVABLE SELF-LOCKING NUT, UNS S30403 2016-07-22 00:00:00.0 Revised
AS3550A ASSEMBLY NUT, PLATE, REMOVABLE SELF-LOCKING NUT 2016-07-22 00:00:00.0 Revised
AS3552A Nut, Self-Locking, Double Hexagon, Silver Plated, Extended Wrench Pad 180 ksi, 1400 °F, UNS N07001 2012-11-01 00:00:00.0 Reaffirmed
AS3553A Nut, Self-Locking, Double Hexagon, Silver Plated, Counterbored 180 ksi, 1400 °F, UNS N07001 2012-11-01 00:00:00.0 Reaffirmed
AS3554B NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, REDUCED HEIGHT 180 KSI, 1400 °F, UNS N07001 2015-09-21 00:00:00.0 Revised
AS3563D NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 °F, UNS S66286 2013-08-22 00:00:00.0 Revised
AS3564E NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 KSI, 800 °F, UNS S66286 2017-08-21 00:00:00.0 Revised
AS3565A WASHER, FLAT, COUNTERSUNK, UNS S66286 2016-01-09 00:00:00.0 Revised
AS3566A NUT, SELF-LOCKING, CASTELLATED, PREVAILING TORQUE, UNS G41300 OR UNS G43400, UNJ 16 PITCH THREAD FORM 2013-10-04 00:00:00.0 Revised
AS3568A SCREW, DRIVE, ROUND HEAD, TYPE U, AMS5504 (UNS S41000) 2018-01-10 00:00:00.0 Stabilized
AS3572 Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Heavy-Duty, Self-Broaching Keys, Uns S66286 2012-11-01 00:00:00.0 Reaffirmed
AS3573B Insert, Screw Thread, Non-Locking, Locked In, Key Locked, Extra Heavy-Duty, Self-Broaching Keys, UNS S66286 2018-10-15 00:00:00.0 Revised
AS3574B BOLT, SHEAR - DOUBLE HEX HEAD, UNS N07718 - 185 KSI 2016-07-18 00:00:00.0 Revised
AS3577 Pin, Spring - Tubular, Coiled, Standard Duty, UNS N07718 2012-11-01 00:00:00.0 Reaffirmed
AS3580 BOLT, MACHINE - DOUBLE HEX HEAD, PD SHANK, UNS N07718 - 185 KSI 2014-04-24 00:00:00.0 Reaffirmed
AS3584A PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 416 OR 416SE, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623 2014-04-24 00:00:00.0 Reaffirmed
AS3585A PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 416 OR 416SE, STD AND .010 OVERSIZE DAIMETERS, SHORT, UNS S41600/UNS S41623 2014-04-24 00:00:00.0 Reaffirmed
AS3586A PIN AND PLUG, EXPANSION, SET OF PARTS CRES, 303, LONG, UNS S30300 2014-04-24 00:00:00.0 Reaffirmed
AS3587A PIN AND PLUG, EXPANSION, SET OF PARTS, STD AND .010 OVERSIZE DIAMETERS, CRES 303, SHORT, UNS S30300 2014-04-24 00:00:00.0 Reaffirmed
AS3588A PIN AND PLUG, EXPANSION, SET OF PARTS AL ALLOY 2024-T4 AND 2024-T351, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS A92024 2014-04-24 00:00:00.0 Reaffirmed
AS3589B PIN AND PLUG, EXPANSION SET OF PARTS, AL ALLOY 2024-T4 AND 2024-T351, LONG; STD AND .010 OVERSIZE DIAMETERS (UNS A92024) 2015-04-28 00:00:00.0 Reaffirmed
AS3601A NUT, FLOATING, SELF-LOCKING, ATTACHED RETENTION ELEMENT, 450 °F, 125 KSI FTU, UNS S66286 2013-08-12 00:00:00.0 Revised
AS3602A NUT ELEMENT, ATTACHED RETENTION ELEMENT, 450 °F, 125 KSI FTU, UNS S66286 2013-08-12 00:00:00.0 Revised
AS3611B BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, COBALT-NICKEL ALLOY UNS R30159, 260 KSI MIN 2017-01-03 00:00:00.0 Revised
AS3613A Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi Min 2007-10-02 00:00:00.0 Canceled
AS3616 Nut, Self-Locking, Double Hexagon Reduced Flange, Solid Film Lube Counterbored 180 ksi, 1400 °F, UNS N07001 2018-08-23 00:00:00.0 Reaffirmed
AS3618A CABLE, SAFETY, FERRULE, ELONGATED CORROSION AND HEAT RESISTANT STEEL, UNS S32100 2015-03-05 00:00:00.0 Revised
AS3619B CABLE, SAFETY, FERRULE, ELONGATED AND KITS NICKEL ALLOY, UNS N06600 2015-03-05 00:00:00.0 Revised
AS3622A Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, Close Tolerance Shank, Cobalt-Nickel Alloy, UNS R30159, 260 ksi Min 2007-10-02 00:00:00.0 Canceled
AS3623 Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cobalt-Nickel ALlloy, UNS R30159, 260 ksi min 2013-10-28 00:00:00.0 Reaffirmed
AS3625B Nut, Self-Locking, Double Hexagon, Reduced Envelope, UNS S66286, Silver Plated Threads Only 2018-07-02 00:00:00.0 Revised
AS3626B NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286, COUNTERBORED SILVER PLATED THREADS ONLY 2018-05-16 00:00:00.0 Revised
AS3650A BOLT, MACHINE – DOUBLE HEX HEAD, REDUCED SHANK, UNS N07718 – 185 KSI 2015-04-28 00:00:00.0 Reaffirmed
AS3651A INSERT, SCREW THREAD, SHORT, SELF-LOCKING, KEY LOCKED, SELF-BROACHING KEYS, UNS S66286 2015-02-10 00:00:00.0 Revised
AS3652A INSERT, SCREW THREAD, SHORT, SELF-LOCKING, KEY LOCKED, OVERSIZE SELF-BROACHING KEYS, UNS S66286 2015-02-10 00:00:00.0 Revised
AS3653A INSERT, SCREW THREAD, LONG SELF-LOCKING, KEY LOCKED, SELF-BROACHING KEYS, UNS S66286 2015-02-10 00:00:00.0 Revised
AS3654A INSERT, SCREW THREAD, LONG, SELF-LOCKING, KEY LOCKED, OVERSIZE SELF-BROACHING KEYS, UNS S66286 2015-02-10 00:00:00.0 Revised
AS3655 CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625) 2014-04-24 00:00:00.0 Reaffirmed
AS3658A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN 2014-04-24 00:00:00.0 Reaffirmed
AS3659 BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN 2014-04-24 00:00:00.0 Reaffirmed
AS3661 BOLT, MACHINE, DOUBLE HEXAGON, EXTENDED WASHER HEAD , PD SHANK, NICKEL ALLOY, UNS N07718, 220 KSI MIN 2015-06-16 00:00:00.0 Issued
AS3662 BOLT, MACHINE, DOUBLE HEXAGON, DRILLED, EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 220 KSI MIN 2015-03-09 00:00:00.0 Issued
AS41F Propeller Shaft Ends - Single Rotation 2013-01-04 00:00:00.0 Stabilized
AS4299B Rings, Retaining – Spiral Wound, Uniform Section, Corrosion and Heat Resistant, UNS S66286 2018-07-02 00:00:00.0 Revised
AS4389 Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures 2018-08-23 00:00:00.0 Reaffirmed
AS4393C Nut, Self-Locking, UNS S66286, 1200 °F, 160,000 psi, UNJ Thread 2015-08-24 00:00:00.0 Revised
AS4417A Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant, High Strength, All Metal, Solid Film Lubricated, 1400 °F, Procurement Specification 2014-04-03 00:00:00.0 Revised
AS44B Starter, Mounting Pads and Drives - Types I, II, III & IV 2013-01-04 00:00:00.0 Stabilized
AS4506B Bolts and Screws, Steel, UNS S66286 Tensile Strength 160 ksi, Procurement Specification 2015-04-28 00:00:00.0 Reaffirmed
AS4536C Safety Cable Kit Procurement Specification and Requirement for Use 2017-02-21 00:00:00.0 Revised
AS45909A Stud, Locked In, Ring Locked, Serrated, General Specification For 2015-12-06 00:00:00.0 Canceled
AS462 Shafts for Ball Bearing Retaining Spanner Nuts and Key Washers 2012-11-01 00:00:00.0 Reaffirmed
AS469C Drive - Accessory, 8" Bolt Circle 2013-06-18 00:00:00.0 Stabilized
AS4723 Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant, Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS4724 Studs and Inserts, Locked In, Self-Broaching Keys - Hole Dimensions and Installation Requirements 2018-08-23 00:00:00.0 Reaffirmed
AS4726A Nuts, Self-Locking, UNS S66286 Classification: 220 ksi/850 °F Procurement Specification 2017-02-23 00:00:00.0 Stabilized
AS478P Identification Marking Methods 2017-11-03 00:00:00.0 Revised
AS47B PUMP, FUEL, MOUNTING PAD AND DRIVE 2013-12-19 00:00:00.0 Stabilized
AS4847B Shank Nuts, Captive Blind Fastener,Mating Retaining Flange,Design Standard For 2018-03-29 00:00:00.0 Revised
AS4877H Bolts and Screws, Nickel Alloy UNS N07718, Classification: 185 ksi/1200 °F Procurement Specification 2018-08-28 00:00:00.0 Revised
AS4891 Stud, Locked In, Key Locked, UNS S66286, Classification: 140 ksi, Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS4892A Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked, Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS49011A ROD END - THREADED, AIRCRAFT 2015-04-21 00:00:00.0 Revised
AS4958A Performance, Nut, Self-Locking, Castellated, Prevailing Torque, UNJ 16 Pitch Thread Form 2013-10-04 00:00:00.0 Revised
AS4959A Bolts and Screws, Steel, UNS S66286 Tensile Strength 140 ksi 1650 °F Solution Heat Treatment Aged Before Fillet and Thread Rolling Procurement Specification 2018-01-19 00:00:00.0 Stabilized
AS4976 Insert, Screw Thread, Non-Locking, UNS S66286, Locked In, Key Locked, Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS4983 Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS5054A Areas for Calculating Stress or Load Values for Externally and Internally Threaded Fasteners 2018-08-23 00:00:00.0 Reaffirmed
AS5133 Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements 2018-08-23 00:00:00.0 Reaffirmed
AS51989C Stud, Locked In-Ring Locked, Serrated 2018-09-28 00:00:00.0 Revised
AS51990B RING, LOCK, SERRATED 2016-05-06 00:00:00.0 Revised
AS51992C Stud, Locked-In Ring, Serrated, High Strength 2018-10-24 00:00:00.0 Revised
AS51997B Ring, Lock, Serrated-High Strength 2013-10-28 00:00:00.0 Reaffirmed
AS5270 Bolts, Screws and Studs, Nickel Alloy, UNS N07718, Work-Strengthened, Tensile Strength 220 ksi, Procurement Specification 2013-09-19 00:00:00.0 Issued
AS5272E Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification 2016-04-10 00:00:00.0 Reaffirmed
AS5377 Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 °F, UNJ Thread - Procurement Specification 2018-08-23 00:00:00.0 Reaffirmed
AS54 Tachometer Drive - Type I 2012-11-19 00:00:00.0 Reaffirmed
AS5443B WRENCHING ELEMENT, SPLINE DRIVE - DIMENSIONS FOR 2017-11-29 00:00:00.0 Revised
AS5447 Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination 2018-08-23 00:00:00.0 Reaffirmed
AS5528C Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting 2016-06-22 00:00:00.0 Revised
AS55B Tachometer Mounting Pad and Drive - Type II 2013-01-04 00:00:00.0 Stabilized
AS567K Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of 2015-04-28 00:00:00.0 Revised
AS5685A Steel, Corrosion Resistant, Safety Wire, 18Cr - 11.5Ni (UNS S30500) Solution Heat Treated, Cold Finished 2015-03-09 00:00:00.0 Stabilized
AS56D Lever Ends - Fuel and Power Control 2018-09-19 00:00:00.0 Stabilized
AS5870 Thread Inspection Practices 2014-10-21 00:00:00.0 Reaffirmed
AS5878 Nut, Self-Locking, Nickel Alloy, UNS N07001, 1400 °F, 180,000 psi, UNJ Thread, Procurement Specification 2013-10-28 00:00:00.0 Reaffirmed
AS5887 Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For 2014-02-21 00:00:00.0 Issued
AS6140A NUT, SPANNER BEARING RETAINING, PHOSPHATE TREATED AERONAUTICAL, UNS G41400 2015-08-21 00:00:00.0 Stabilized
AS6146A NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286 2016-11-12 00:00:00.0 Revised
AS6305 DIMENSIONS AND GAGING MORTORQ® SPIRAL DRIVE INTERNAL RECESS 2017-01-12 00:00:00.0 Issued
AS6315 WRENCHING CONFIGURATION EXTERNAL MORTORQ® SUPER SPIRAL BOLT HEAD 2017-11-21 00:00:00.0 Issued
AS63B Carburetor Flange, Aircraft, 4 Bolt - Single Barrel - No. 2, 3, 4, 5, 7 and 9 2013-01-03 00:00:00.0 Stabilized
AS6416 Bolts, Screws, Studs, and Nuts, Definitions for Design, Testing and Procurement 2017-04-18 00:00:00.0 Issued
AS6922 NUT, SELF-LOCKING, SHANK, 1400°F, 180 KSI NICKEL ALLOY (UNS N07001) SILVER PLATED THREADS ONLY, UNJ THREAD 2017-11-03 00:00:00.0 Issued
AS701D BOSS DESIGN FOR SPARK IGNITERS 2015-01-09 00:00:00.0 Stabilized
AS7205 Spring Pins, Tubular, Carbon Steel, Procurement Specification for 2018-08-23 00:00:00.0 Reaffirmed
AS7207 Spring Pins, Tubular, Slotted Corrosion and Moderate Heat Resistant Steel Procurement Specification for 2018-08-23 00:00:00.0 Reaffirmed
AS7210A Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for 2018-08-23 00:00:00.0 Reaffirmed
AS7211A Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification 2018-08-23 00:00:00.0 Reaffirmed
AS7220A Aluminum Rivets, UNS A91100, 99Al (1100-H14) 2017-07-05 00:00:00.0 Revised
AS7222A Aluminum Rivets, UNS A92117, 2.5Cu - 0.3Mg (2117-T4), Procurement Specification 2013-10-10 00:00:00.0 Reaffirmed
AS7225A Rivets, Carbon Steel Procurement Specification for 2015-04-28 00:00:00.0 Reaffirmed
AS7228A Rivets, Steel, Corrosion Resistant, 18Cr-9Ni, Solution Heat Treated, Procurement Specification for 2015-12-27 00:00:00.0 Revised
AS7229 Rivets, Steel, Corrosion and Heat Resistant, 18Cr - 10.5Ni - 0.70(Cb+Ta), Solution Heat Treated, Procurement Specification For 2013-10-28 00:00:00.0 Reaffirmed
AS7232A Rivets, Solid and Tubular, Nickel Alloy Corrosion and Heat Resistant 74Ni - 15.5Cr - 8.0Fe Procurement Specification For 2018-08-23 00:00:00.0 Revised
AS7233 Rivets, Solid, UNS N04400, Corrosion Resistant 67Ni - 31Cu, Procurement Specification for 2018-08-23 00:00:00.0 Reaffirmed
AS7234 Rivets, Blind, Corrosion Resistant Alloy 67Ni - 31Cu Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS7235 Rivets, UNS S66286, Steel, Corrosion and Heat Resistant, 80 ksi Shear Strength, Procurement Specification for 2018-08-23 00:00:00.0 Reaffirmed
AS7236 Rivets, Alloy, Corrosion and Heat Resistant 52Co - 20Cr - 10Ni - 15W Solution Heat Treated Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS7237 Rivets, Nickel Alloy, Corrosion and Heat Resistant 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS7240A Washers, Spring Lock, Carbon Steel, Procurement Specification for 2015-02-24 00:00:00.0 Stabilized
AS7241A Washers, Spring Lock, Corrosion Resistant Steel 18Cr - 9Ni (UNS S30200), Procurement Specification for 2016-11-15 00:00:00.0 Reaffirmed
AS7245A Inserts, Screw Thread, Helical Coil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS7246 Inserts, Screw Thread, Helical Coil 72Ni-15.5Cr-0.95(Cb+Ta)-2.5Ti-0.70Al-7.0Fe Corrosion and Heat Resistant Alloy Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS7250D Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UN Thread Form 2013-12-10 00:00:00.0 Revised
AS7251C Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UNJ Thread Form 2014-08-20 00:00:00.0 Revised
AS7252A Nuts, Self-Locking, Steel High Strength, All Metal 450 °F Use, UN and UNJ Thread Form 2015-08-21 00:00:00.0 Revised
AS7253C Nuts, Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 °F Procurement Specification 2015-02-24 00:00:00.0 Revised
AS7283C Gaskets, Type XX Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced Controlled Performance 2018-08-09 00:00:00.0 Stabilized
AS7325C Gasket, Metal O-Ring Corrosion and Heat Resistant Steel Procurement Specification for 2018-09-14 00:00:00.0 Stabilized
AS7330 Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant Steel Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
AS7431A Bracket, Support Clamp 2013-03-12 00:00:00.0 Revised
AS7452B Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded 2014-08-20 00:00:00.0 Revised
AS7454C Bolts and Screws, Steel, Low Alloy, Heat Resistant, 135000 psi Tensile Strength, Normalized and Tempered, Roll Threaded 2018-05-07 00:00:00.0 Revised
AS7455B Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded 2016-05-24 00:00:00.0 Revised
AS7456C Studs, Steel, Low Alloy, Heat Treated, Roll Threaded 2016-04-20 00:00:00.0 Revised
AS7458B Studs, Steel, Low Alloy, Heat Resistant Normalized and Tempered, Roll Threaded 135000 psi Tensile Strength 2016-01-15 00:00:00.0 Revised
AS7459C Bolts and Screws, Steel UNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture Rated Procurement Specification 2015-08-14 00:00:00.0 Stabilized
AS7460C Bolts and Screws, Titanium Alloy, 6.0Al - 4.0V, Procurement Specification For 2017-04-26 00:00:00.0 Revised
AS7461D Bolts and Screws, Titanium Alloy, 6Al-4V, UNS R56400, Fatigue-Rated, Procurement Specification For 2015-08-07 00:00:00.0 Revised
AS7466E Bolts and Screws, Nickel Alloy, UNS N07718, Tensile Strength 185 ksi, Fatigue Rated, Procurement Specification 2014-08-20 00:00:00.0 Revised
AS7467B Bolts and Screws, Nickel Alloy, UNS N07718, Tensile Strength 185 ksi, Stress Rupture Rated, Procurement Specification 2013-06-27 00:00:00.0 Revised
AS7468B Bolts, Cobalt-Chromium-Nickel Alloy, Uns R30035, Tensile Strength 260 Ksi, Procurement Specification 2012-11-19 00:00:00.0 Reaffirmed
AS7469B Bolts and Screws, Uns N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 Ksi, Procurement Specification 2018-08-08 00:00:00.0 Revised
AS7470C Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded 2012-11-19 00:00:00.0 Reaffirmed
AS7471H Bolts and Screws, Nickel Alloy, UNS N07001, Tensile Strength 165 ksi, Corrosion and Heat Resistant, Procurement Specification 2018-02-07 00:00:00.0 Revised
AS7472A Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded 2015-04-28 00:00:00.0 Reaffirmed
AS7473C Bolts and Screws, Roll Threaded Procurement Specification For 2018-01-19 00:00:00.0 Revised
AS7474D Bolts and Screws, Steel, Corrosion Resistant, UNS S17400, Tensile Strength 140 ksi, Procurement Specification 2018-01-09 00:00:00.0 Revised
AS7475D Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification 2015-04-29 00:00:00.0 Reaffirmed
AS7477G Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification 2017-09-05 00:00:00.0 Revised
AS7478D Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 °F 1800 °F Solution Heat Treated, Aged After Roll Threaded Procurement Specification for 2017-03-28 00:00:00.0 Revised
AS7479D Bolts and Screws, Steel, UNS S66286, 1650 °F Solution Heat Treated, Precipitation Heat Treated Before Roll Threaded 2013-09-26 00:00:00.0 Revised
AS7481C Studs, Steel, UNS S66286 Aged After Roll Threaded Procurement Specification For 2015-02-17 00:00:00.0 Stabilized
AS7482B Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 130 ksi 1800 °F Solution Heat Treated, Aged Before Roll Threading Procurement Specification 2015-04-29 00:00:00.0 Reaffirmed
AS82C Screw Thread Form, American National, Modified (National Round - NR) 2018-01-29 00:00:00.0 Stabilized
AS848A ATTACHMENT POINTS, ENGINE, REMOTE TRIMMING MAIN FUEL CONTROL 2018-02-12 00:00:00.0 Stabilized
AS84D Splines, Involute (Full Fillet) 2014-02-06 00:00:00.0 Stabilized
AS870E WRENCHING CONFIGURATION, BI-HEXAGONAL (12 POINT) DRIVE, DESIGN STANDARD FOR 2015-02-17 00:00:00.0 Stabilized
AS87132 Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners 2018-08-23 00:00:00.0 Reaffirmed
AS880 Propeller Shaft End - Flanged 4.250 (107.95) Bolt Circle 2012-11-19 00:00:00.0 Reaffirmed
AS8879D Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter 2018-08-23 00:00:00.0 Reaffirmed
AS8991A Gasket, Fuselage Light - Cover Screw 2018-08-09 00:00:00.0 Stabilized
AS903 Remote Trimming Attachment for Aircraft Turbine Engine Controls 2012-11-19 00:00:00.0 Reaffirmed
AS9047B Pin - Spring, Steel, Phosphate Finish 2012-10-15 00:00:00.0 Stabilized
AS90708B RING, RETAINING, EXTERNAL, INTERLOCKING 2017-06-29 00:00:00.0 Revised
AS90B Propeller Blades, Aluminum Alloy, Shank Dimensions For 2013-03-12 00:00:00.0 Stabilized
AS9105A PIN, STRAIGHT, HEADLESS, AMS5688, LOCK 2015-01-09 00:00:00.0 Stabilized
AS91101C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A 2017-01-04 00:00:00.0 Revised
AS91111C Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286 130 Ksi Min, .2500-28 UNJF-3A 2017-01-03 00:00:00.0 Revised
AS9112B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286, 130 KSI, .3125-24 UNJF-3A 2015-04-29 00:00:00.0 Reaffirmed
AS9141C GASKET – METAL O-RING, .035 TUBE X .006 WALL, CRES - UNS S32100 2018-07-16 00:00:00.0 Stabilized
AS9142C GASKET – METAL 0-RING, .062 TUBE X .006 WALL, CRES- UNS S32100 2018-07-16 00:00:00.0 Stabilized
AS9144C Gasket - Type XX Engine Accessory Drive 2018-08-09 00:00:00.0 Stabilized
AS9158 Bolt-Machine, Steel, 12 Point Head, .250-28, Black Oxide 2012-11-19 00:00:00.0 Reaffirmed
AS91601B Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Black Oxide, Steel, Uns G87400, 125 Ksi Min, .375-24, Unf-3a 2012-11-19 00:00:00.0 Reaffirmed
AS91641B Pin, Straight, Headless, Oversize, Steel, UNS G10950 2018-10-18 00:00:00.0 Stabilized
AS91691B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .1900-32 UNF-3A 2015-06-16 00:00:00.0 Stabilized
AS91701B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .2500-28 UNF-3A 2015-06-12 00:00:00.0 Stabilized
AS91711B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .3125-24 UNF-3A 2015-06-16 00:00:00.0 Stabilized
AS91721B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, BLACK OXIDE, STEEL, UNS G87400, 125 KSI MIN .3750-24 UNF-3A 2015-06-16 00:00:00.0 Stabilized
AS91761A Plug, Expansion - Tapered, AMS 5040 2005-08-18 00:00:00.0 Canceled
AS919A Shallow Groove Shafts and Locking Devices for Bearing Retaining Spanner Nuts 2018-01-02 00:00:00.0 Stabilized
AS91D Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing) 2013-03-12 00:00:00.0 Stabilized
AS9202C Gasket - Metal O-Ring, .062 Tube X .010 Wall, Cres Uns S32100 2018-07-25 00:00:00.0 Stabilized
AS9203C Gasket - Metal O-Ring, .094 Tube X .006 Wall, Cres Uns S32100 2018-09-17 00:00:00.0 Stabilized
AS9204C Gasket - Metal O-Ring, .094 Tube X .010 Wall, Cres Uns S32100 2018-09-17 00:00:00.0 Stabilized
AS9205C Gasket - Metal O-Ring, .125 Tube X .010 Wall, Cres Uns S32100 2018-09-17 00:00:00.0 Stabilized
AS9207C Screw, Machine - Steel, Diffused Nickel - Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675 195 Ksi Min, .1640-36 UNJF-3A 2012-01-17 00:00:00.0 Stabilized
AS9208C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A 2015-06-22 00:00:00.0 Stabilized
AS9209C Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14765, 195 Ksi Min, .2500-28 UNJF-3A 2012-01-17 00:00:00.0 Stabilized
AS9210C Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675, 195 Ksi Min, .3125-24 UNJF-3A 2012-01-17 00:00:00.0 Stabilized
AS9212C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER-HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A 2017-11-07 00:00:00.0 Revised
AS9216C Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .1640-36 UNJF-3A 2012-01-31 00:00:00.0 Stabilized
AS9217C Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .190-32 UNJF-3A 2012-02-01 00:00:00.0 Stabilized
AS9218E Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 Ksi Min, .2500-28 UNJF-3A 2012-01-31 00:00:00.0 Stabilized
AS9219D Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 ksi Min, .3125-24 UNJF-3A 2012-10-15 00:00:00.0 Stabilized
AS9226A WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 °F 2014-02-06 00:00:00.0 Stabilized
AS9228A BRACKET, ANGLE, 90° .190 BOLT 2014-02-06 00:00:00.0 Stabilized
AS9230A BRACKET, ANGLE, 90° .190 X .312 BOLT 2014-02-27 00:00:00.0 Stabilized
AS9231A BRACKET, ANGLE, 90° .190 X .375 BOLT 2014-02-06 00:00:00.0 Stabilized
AS9245B PIN, COTTER - CRES, UNS S32100, AS7211 2014-02-21 00:00:00.0 Revised
AS9276B WASHER, KEY - 180 DEG, LOCKING, CRES, UNS S32100 2013-07-09 00:00:00.0 Revised
AS9283B BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A 2015-04-28 00:00:00.0 Revised
AS9284B BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A 2015-04-28 00:00:00.0 Revised
AS9285B BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A 2015-06-16 00:00:00.0 Revised
AS9286B BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9292B SCREW, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9294B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9296B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9297B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A 2015-07-23 00:00:00.0 Revised
AS92C CONES, FRONT, PROPELLER HUB 2015-02-24 00:00:00.0 Stabilized
AS9303C STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A 2014-08-20 00:00:00.0 Stabilized
AS9304C STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G887400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A 2014-08-20 00:00:00.0 Stabilized
AS9305C STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A 2014-08-20 00:00:00.0 Stabilized
AS9306C STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A 2014-08-20 00:00:00.0 Stabilized
AS9307C STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A 2014-08-20 00:00:00.0 Stabilized
AS9308B STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A 2014-02-13 00:00:00.0 Revised
AS9309B STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A 2014-01-02 00:00:00.0 Stabilized
AS9310B STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A 2014-01-02 00:00:00.0 Stabilized
AS9311B STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G878400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A 2014-01-02 00:00:00.0 Stabilized
AS9312B STUD, SHOULDERED, STEPPED, HEX, WRENCHING, DRILLED, STEEL, UNS G87400, CAD, PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A 2014-01-02 00:00:00.0 Stabilized
AS9316B SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .1900-32 UNS-3A 2017-04-27 00:00:00.0 Reaffirmed
AS9317C SCREW, MACHINE - HEXAGON HEAD, SLOTTED, FULL SHANK, ALLOY STEEL, UNS K14675, 135 KSI MIN, .2500-28 UNS-3A, NI - CAD. PLATE 2015-04-21 00:00:00.0 Revised
AS9318A Rivet, Solid - 100° Flush Head, AMS 7233 2012-11-19 00:00:00.0 Reaffirmed
AS9319A Rivet, Solid - Universal Head, Monel UNS N04400 2012-11-19 00:00:00.0 Reaffirmed
AS9320B Washer, Flat - AMS6350 2012-02-02 00:00:00.0 Stabilized
AS9321A WASHER, FLAT - AMS 5510 2015-01-09 00:00:00.0 Stabilized
AS9356C NUT, PLAIN, HEXAGON, UNS S66286 2018-05-16 00:00:00.0 Revised
AS9357B NUT, PLAIN, HEXAGON, SILVER PLATED, UNS S66286, 130 KSI MIN 2013-11-18 00:00:00.0 Revised
AS9358B NUT, PLAIN, CASTELLATED, HEXAGON - UNS S66286, 130 KSI MI 2018-07-02 00:00:00.0 Revised
AS9359A Nut, Castellated, Hexagon, Silver Plated, Cres UNS S66286, 130 ksi min 2012-11-19 00:00:00.0 Reaffirmed
AS9360C NUT, PLAIN, HEXAGON - DRILLED, SILVER PLATED - UNS S66286, 130 KSI MIN 2013-07-16 00:00:00.0 Revised
AS9361B NUT, PLAIN, HEXAGON, CHECK, UNS S66286 130 KSI MIN 2013-07-16 00:00:00.0 Revised
AS9362A Nut, Plain, Hexagon, Check - UNS S66286, 130 ksi Min, Silver Plated 2012-11-19 00:00:00.0 Reaffirmed
AS9363A Nut, Slotted, Hexagon, Shear - UNS S66286, 130 ksi min 2012-11-19 00:00:00.0 Reaffirmed
AS9364A Nut, Slotted, Hexagon, Shear - Silver Plated, UNS S66286, 130 ksi min 2012-11-19 00:00:00.0 Reaffirmed
AS9371C GASKET – METAL O-RING .035 TUBE X .006 WALL, SILVER PLATED, CRES – UNS S32100 2018-07-16 00:00:00.0 Stabilized
AS9372C GASKET – METAL O-RING, .062 TUBE X .006 WALL, SILVER PLATED, CRES – UNS S32100 2018-07-16 00:00:00.0 Stabilized
AS9373C GASKET – METAL O-RING, .062 TUBE X .010 WALL, SILVER PLATED, CRES – UNS S32100 2018-07-16 00:00:00.0 Stabilized
AS9374B Gasket - Metal O-Ring, .094 Tube X .006 Wall, Silver Plated Cres - Uns S32100 2012-11-01 00:00:00.0 Reaffirmed
AS9375C Gasket - Metal O-Ring, .094 Tube X .010 Wall, Silver Plated Cres - Uns S32100 2018-08-16 00:00:00.0 Stabilized
AS9376C Gasket - Metal O-Ring, .125 Tube X .010 Wall, Silver Plated Cres - Uns S32100 2018-09-19 00:00:00.0 Stabilized
AS9379 Plug, Expansion - AMS 5510 2012-11-01 00:00:00.0 Reaffirmed
AS9380 Plug, Expansion - AMS 4003 2012-11-01 00:00:00.0 Reaffirmed
AS9389A Pin, Straight, Headless - AMS5735, Lock 2018-10-18 00:00:00.0 Stabilized
AS9390C PIN, STRAIGHT, HEADLESS, DOWEL - CRES, UNS S66286, STANDARD AND OVERSIZE 2016-11-15 00:00:00.0 Reaffirmed
AS9397B Bolt, Tee Head - Cadmium Plated, Steel, UNS G87400, 125 ksi min, Chamfered, .1900-32 UNJF-3A 2017-03-21 00:00:00.0 Revised
AS9398C Bolt, Tee Head, Chamfered - Cadmium Plated, Steel, UNS G87400, 125 ksi min, .2500-28 UNJF-3A 2017-01-10 00:00:00.0 Revised
AS9399B BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3125-24 UNJF-3A 2017-01-09 00:00:00.0 Revised
AS93E Cones, Rear, Propeller Hub 2013-03-12 00:00:00.0 Stabilized
AS9400B BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3750-24 UNJF-3A 2015-08-24 00:00:00.0 Revised
AS9401B BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .4375-20 UNJF-3A 2015-08-24 00:00:00.0 Revised
AS9402B BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .5000-20 UNJF-3A 2015-08-28 00:00:00.0 Revised
AS9403 Rivet, Solid - Universal Head, Ams 5737 2012-11-01 00:00:00.0 Reaffirmed
AS9432B Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .1900-32 UNJF-3A 2018-08-23 00:00:00.0 Reaffirmed
AS9433B Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2018-08-23 00:00:00.0 Reaffirmed
AS9434B Bolt, Tee Head, Chamfered - Cres, UNS S66286, 130 ksi min, .3125-24 UNJF-3A 2018-08-23 00:00:00.0 Reaffirmed
AS9440B BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A 2014-03-23 00:00:00.0 Stabilized
AS9441B BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A 2014-01-09 00:00:00.0 Stabilized
AS9442C BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A 2015-08-24 00:00:00.0 Stabilized
AS9444B BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A 2014-01-09 00:00:00.0 Stabilized
AS9449C SCREW MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD UNS K14675, 195 KSI MIN, .1380-40 UNJF-3A 2015-06-22 00:00:00.0 Stabilized
AS9450B SCREW, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, DRILLED, UNS K14675, 195 KSI MIN, .1640-36 UNJF-3A 2015-02-17 00:00:00.0 Stabilized
AS9451C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9452C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9453C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3125-24 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9454C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .3750-24 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9455C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9456C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5000-20 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9457C BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .5625-18 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9458C BOLT, MACHINE - STEEL, DIFFUSED NICKEL CADMIUM PLATED, HEXAGON HEAD, UNS K14675, 195 KSI MIN, .6250-18 UNJF-3A 2015-10-30 00:00:00.0 Stabilized
AS9459B BOLT, MACHINE - STEEL, AMS6304 (UNS K14675), DIFFUSED NICKEL-CADMIUM PLATED HEXAGON HEAD, .7500-16 UNJF-3A 2016-05-06 00:00:00.0 Revised
AS9460 Rivet, Solid - 100° Flush Head, AMS 7235 2012-11-01 00:00:00.0 Reaffirmed
AS9462B Pin, Straight, Headed, .124 Diameter, Cres, UNS S66286 2018-10-18 00:00:00.0 Stabilized
AS9463B Pin, Straight, Headed, .186 Diameter, Cres, UNS S66286 2018-10-18 00:00:00.0 Stabilized
AS9464D Pin, Straight, Headed, .248 Diameter, Cres, UNS S66286 2018-10-18 00:00:00.0 Stabilized
AS9465A Pin, Straight, Headed, .311 Diameter, Cres, UNS S66286 2012-11-01 00:00:00.0 Reaffirmed
AS9466A Pin, Straight, Headed, .373 Diameter, Cres, UNS S66286 2012-11-01 00:00:00.0 Reaffirmed
AS9467A Pin, Straight, Headed, .436 Diameter, Cres, UNS S66286 2012-11-01 00:00:00.0 Reaffirmed
AS9468A Pin, Straight, Headed .497 Diameter, AMS5735 2018-10-18 00:00:00.0 Stabilized
AS9482B Washer, Flat - Steel AMS6437 or AMS6485, Diffused Nickel-Cadmium Plated, Countersunk 2012-02-02 00:00:00.0 Stabilized
AS9486A Pin, Straight, Headless - AMS5132, Lock 2018-10-18 00:00:00.0 Stabilized
AS9489D BOLT, MACHINE - HEXAGON HEAD, FULL, SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A 2015-12-19 00:00:00.0 Revised
AS9490B BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A 2018-03-13 00:00:00.0 Revised
AS9491B BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A 2018-06-29 00:00:00.0 Revised
AS9492A Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .375-24 Unjf-3a 2012-11-01 00:00:00.0 Reaffirmed
AS9493A Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .4375-20 Unjf-3a 2012-11-01 00:00:00.0 Reaffirmed
AS9494B Bolt, Machine - Hexagon Head, Full Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .500-20 Unjf-3a 2018-11-02 00:00:00.0 Revised
AS9496B Bolt, Machine - Hexagon Head, Full Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .625-18 Unjf-3a 2018-11-02 00:00:00.0 Revised
AS94C Snap Ring, Non-Controllable Propeller Hub (UNS G87400) 2013-03-12 00:00:00.0 Stabilized
AS9500B BOLT, MACHINE – HEXAGON HEAD DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KIS MIN, .1900-32 UNJF-3A 2016-07-26 00:00:00.0 Revised
AS9501B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A 2016-07-26 00:00:00.0 Revised
AS9502B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A 2016-07-26 00:00:00.0 Revised
AS9503B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A 2016-07-26 00:00:00.0 Revised
AS9505B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A 2016-08-29 00:00:00.0 Revised
AS9516B SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A 2015-02-17 00:00:00.0 Stabilized
AS9517B SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1640-36 UNJF-3A 2015-02-17 00:00:00.0 Stabilized
AS9518C BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A 2015-06-22 00:00:00.0 Stabilized
AS9519C BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A 2015-06-22 00:00:00.0 Stabilized
AS9520C BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A 2015-06-22 00:00:00.0 Stabilized
AS9521C BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A 2015-06-22 00:00:00.0 Stabilized
AS9522C BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A 2015-06-22 00:00:00.0 Stabilized
AS9523C BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A 2015-07-04 00:00:00.0 Stabilized
AS9524C BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .5625-18 UNJF-3A 2015-07-04 00:00:00.0 Stabilized
AS9525C BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .6250-18 UNJF-3A 2016-11-15 00:00:00.0 Stabilized
AS9526C BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .7500-16 UNJF-3A 2015-07-23 00:00:00.0 Stabilized
AS9527B SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A 2016-07-22 00:00:00.0 Revised
AS9528B SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A 2016-06-22 00:00:00.0 Revised
AS9529B BOLT, MACHINE – STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A 2016-06-22 00:00:00.0 Revised
AS9530B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A 2015-08-07 00:00:00.0 Stabilized
AS9531B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A 2015-08-14 00:00:00.0 Stabilized
AS9532B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A 2015-07-28 00:00:00.0 Revised
AS9533B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A 2015-08-14 00:00:00.0 Stabilized
AS9534B BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A 2015-11-02 00:00:00.0 Stabilized
AS9549 Washer, Flat - AMS 5510 2012-11-01 00:00:00.0 Reaffirmed
AS9551B BRACKET, FLAT, STEEL UNS G41300, CADMIUM PLATED 2014-10-27 00:00:00.0 Stabilized
AS9552C BRACKET, FLAT, CRES UNS S32100 2016-04-10 00:00:00.0 Reaffirmed
AS9554E SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A 2018-03-04 00:00:00.0 Revised
AS9555D SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .1640-36 UNJF-3A 2017-10-03 00:00:00.0 Revised
AS9556E BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A 2018-03-04 00:00:00.0 Revised
AS9557E BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .2500-28 UNJF-3A 2017-11-03 00:00:00.0 Revised
AS9558D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .3125-24 UNJF-3A 2017-11-29 00:00:00.0 Revised
AS9559E Bolt, Machine - Double Hexagon Extended Washer Head, Corrosion and Heat Resistant Steel, UNS S66286, UTS 130 ksi min, .3750-24 UNJF-3A 2018-08-28 00:00:00.0 Revised
AS9564A Screw, Machine-Double Hexagon Extended Washer Head, Drilled, Pd Shank, Cres Uns S66286, 130 Ksi Min .1640-36 Unfj-3a 2012-11-01 00:00:00.0 Reaffirmed
AS9565C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .1900-32 UNJF-3A 2014-10-21 00:00:00.0 Reaffirmed
AS9566B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .2500-28 UNJF-3A 2018-07-30 00:00:00.0 Revised
AS9567C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A 2018-08-15 00:00:00.0 Revised
AS9568E BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A 2018-08-15 00:00:00.0 Revised
AS9572B SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A 2015-12-27 00:00:00.0 Revised
AS9573C SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A 2017-10-18 00:00:00.0 Revised
AS9574C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A 2017-07-12 00:00:00.0 Revised
AS9575D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A 2017-07-07 00:00:00.0 Revised
AS9576D BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A 2017-10-18 00:00:00.0 Revised
AS9577B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, UNS S66286, Silver Plated, .3750-24 UNJF-3A 2018-09-28 00:00:00.0 Revised
AS9579C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A 2017-10-18 00:00:00.0 Revised
AS9581B Washer, Key-CRES, AMS 5510, 90°, Locking 2013-07-09 00:00:00.0 Revised
AS9582C WASHER, KEY - 270 DEG, LOCKING, CRES, UNS S32100 2014-04-24 00:00:00.0 Revised
AS9583C BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A 2017-04-18 00:00:00.0 Revised
AS9584B Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .2500-28 UNJF-3A 2016-12-21 00:00:00.0 Revised
AS9585C BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A 2017-04-05 00:00:00.0 Revised
AS9586B Bolt, Machine-Hexagon Drilled, 6 Holes, Full Shank, Corrosion and Heat Resistant Steel, Uns S66286, 130 Ksi Min, .3750-24 Unjf-3a 2012-11-01 00:00:00.0 Reaffirmed
AS9587B Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min, .4375-20 UNJF-3A 2016-12-20 00:00:00.0 Revised
AS9588B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A 2016-12-15 00:00:00.0 Revised
AS9589A BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .5625-18 UNJF-3A 2016-01-15 00:00:00.0 Revised
AS9592B Bracket, Angle, 90°, CRES UNS S32100, .190 Bolt 2012-11-01 00:00:00.0 Reaffirmed
AS9593C Bracket, Angle, 90°, CRES AMS 5510, 190 x .250 Bolt 2018-04-28 00:00:00.0 Stabilized
AS9594B BRACKET, ANGLE, 90°, CRES UNS S32100, .190 X .312 BOLT 2017-03-14 00:00:00.0 Revised
AS9595B Bracket, Angle 90°, Cres UNS S32100, .190 x .375 bolt 2018-04-28 00:00:00.0 Stabilized
AS9596B BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL, UNS G41300, .190 BOLT 2014-03-23 00:00:00.0 Stabilized
AS9597B BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL, UNS G41300, .190 X .250 BOLT 2014-03-23 00:00:00.0 Stabilized
AS9598B BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .312 BOLT 2014-02-27 00:00:00.0 Stabilized
AS9599B BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .375 BOLT 2014-02-27 00:00:00.0 Stabilized
AS9600B Bracket, Angle, 90°, Corrosion and Heat Resistant Steel UNS S41000, .190 Bolt 2018-04-28 00:00:00.0 Stabilized
AS9601B Bracket, Angle, 90°, Cres UNS S41000, .190 x .250 Bolt 2018-06-20 00:00:00.0 Stabilized
AS9602B BRACKET, ANGLE, 90°, CRES UNS S41000, .190 X .312 BOLT 2018-06-21 00:00:00.0 Stabilized
AS9603B Bracket, Angle, 90°, Cres UNS S41000, .190 x .375 Bolt 2018-06-26 00:00:00.0 Stabilized
AS9631 Screw, Machine-Hexagon Head, Pd Shank, Titanium Ams 4967, .138-40 Unjf-3a 2012-11-01 00:00:00.0 Reaffirmed
AS9633B BOLT, MACHINE - HEXAGON HEAD, PD SHANK, TITANIUM AMS4967 (UNS R56400), .190-32 UNJF-3A 2018-07-30 00:00:00.0 Revised
AS9638A Bolt, Machine - Hexagon Head, PD Shank, Titanium AMS4967 (UNS R56400), .500-20 UNJF-3A 2018-08-23 00:00:00.0 Reaffirmed
AS9676B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A 2014-07-08 00:00:00.0 Revised
AS9677B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A 2013-07-16 00:00:00.0 Revised
AS9678B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A 2014-08-20 00:00:00.0 Revised
AS9679B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A 2014-08-20 00:00:00.0 Revised
AS9680B BOLT, MACHINE - DOUBLE HEX, EXTENDED WASHER HD, PD SHANK, CUP WASHER LOCKED, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A 2014-10-16 00:00:00.0 Stabilized
AS9681B BOLT, MACHINE - DOUBLE HEX, EXTENDED WASHER HD, PD SHANK, CUP WASHER LOCKED, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A 2014-09-05 00:00:00.0 Stabilized
AS9685B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A 2016-06-22 00:00:00.0 Revised
AS9686B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A 2016-06-16 00:00:00.0 Revised
AS9687B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A 2016-06-22 00:00:00.0 Revised
AS9696F BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT ALLOY, UNS N07001, 165 KSI MIN, .1900-32 UNJF 3A 2017-07-19 00:00:00.0 Revised
AS9697C Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi min, .2500-28 UNJF-3A 2012-11-01 00:00:00.0 Reaffirmed
AS9698C BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N07001), 165 KSI MIN, .3125-24 UNJF-3A 2016-08-29 00:00:00.0 Revised
AS9699B BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT NICKEL ALLOY (UNS N07001), 165 KSI MIN, .3750-24 UNJF-3A 2016-07-26 00:00:00.0 Revised
AS9705D BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, CORROSION AND HEAT RESISTANT NICKEL ALLOY, .1900-32 UNJF-3A 2017-09-13 00:00:00.0 Revised
AS9712A SCREW, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .1380-40 UNJF-3A 2014-05-22 00:00:00.0 Revised
AS9714A Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Nickel Alloy UNS N07001, .190-32 UNJF-3A 2018-08-23 00:00:00.0 Reaffirmed
AS9715C BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION AND HEAT RESISTANT NICKEL ALLOY, .2500-28 UNJF-3A 2018-03-04 00:00:00.0 Revised
AS9716B Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and Heat Resistant Steel, .3125-24 UNJF-3A 2017-01-03 00:00:00.0 Revised
AS9724D Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 ksi Min, .2500-28 UNJF-3A 2018-08-13 00:00:00.0 Revised
AS9732B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .1900-32 UNJF-3A 2017-10-18 00:00:00.0 Revised
AS9733B BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .2500-28 UNJF-3A 2017-11-03 00:00:00.0 Revised
AS9734B BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .3125-24 UNJF-3A 2017-10-18 00:00:00.0 Revised
AS9741B Bolt, Machine - Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres UNS S17400, 140 ksi min .1900-32 UNJF-3A 2013-10-29 00:00:00.0 Reaffirmed
AS9742A Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, PD Shank, Cres AMS 5643, .2500-28 UNJF-3A 2013-10-28 00:00:00.0 Reaffirmed
AS9750A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, AMS4967 (TI 6AL - 4V), .1900-32 UNJF-3A 2013-04-01 00:00:00.0 Revised
AS9751A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, AMS4967 (TI 6AL-4V) .2500-28 UNJF-3A 2014-06-30 00:00:00.0 Revised
AS9759A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK AMS4967 (TI 6AL-4V), .1900-32 UNJF-3A 2014-08-01 00:00:00.0 Revised
AS9760A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, TI 6Al-4V (UNS R56400), .2500-28 UNJF-3A 2014-12-05 00:00:00.0 Revised
AS9761A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, 160 KSI UTS MIN, TI 6Al-4V (UNS R56400), .3125-24 UNJF-3A 2014-12-05 00:00:00.0 Revised
AS9783A BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .1900-32 UNJF-3A 2014-12-01 00:00:00.0 Revised
AS9784A BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .2500-28 UNJF-3A 2014-12-01 00:00:00.0 Revised
AS9785A BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), .3125-24 UNJF-3A 2014-10-16 00:00:00.0 Revised
AS9786A BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .375-24 UNJF-3A 2014-10-16 00:00:00.0 Revised
AS9788A BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .5000-20 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9790A BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI MIN UTS, .6250-18 UNJF-3A 2014-10-16 00:00:00.0 Revised
AS9796B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES (UNS S17400), .3125-24 UNJF-3A 2015-01-12 00:00:00.0 Revised
AS9805A BOLT, MACHINE-HEXAGON HEAD, PD SHANK, AMS5643, .1900-32 UNJF-3A 2016-10-13 00:00:00.0 Revised
AS9806A BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400), 140 KSI UTS MIN, .2500-28 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9808A BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400) 140 KSI UTS MIN, .3750-24 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9816A BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400), .1900-32 UNJF-3A 2015-06-12 00:00:00.0 Revised
AS9821A BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, AMS5643, .500-20 UNJF-3A 2017-01-04 00:00:00.0 Revised
AS9841A Key, Woodruff - Chamfered Cres AMS5640 2018-09-14 00:00:00.0 Stabilized
AS9842A Pin, Straight, Headed, .0937 Diameter, UNS S41800 2013-10-28 00:00:00.0 Reaffirmed
AS9843B Pin, Straight, Headed, .1249 Diameter, UNS S41800 2018-10-18 00:00:00.0 Stabilized
AS9844B Pin, Straight, Headed, .1874 Diameter, UNS S41800 2018-10-18 00:00:00.0 Stabilized
AS9845B Pin, Straight, Headed, .2499 Diameter, Uns S41800 2018-10-18 00:00:00.0 Stabilized
AS9846A Pin, Straight, Headed, .3124 Diameter, Uns S41800 2012-11-01 00:00:00.0 Reaffirmed
AS9847A Pin, Straight, Headed, .3749 Diameter, Uns S41800 2012-11-01 00:00:00.0 Reaffirmed
AS9848A Pin, Straight, Headed, .4999 Diameter, Uns S41800 2012-11-01 00:00:00.0 Reaffirmed
AS9880 Washer, Cup, Lock - Cres Ams 5510 2012-11-01 00:00:00.0 Reaffirmed
AS9881B NUT, PLAIN, HEXAGON, CADMIUM PLATED, UNS G87400, 125 KSI MIN 2013-11-18 00:00:00.0 Revised
AS9882B NUT, PLAIN, HEXAGON - DRILLED, CADMIUM PLATED - UNS G878400, 125 KSI MIN 2013-10-11 00:00:00.0 Revised
AS9885A Bolt, Machine - Double Hexagon Extended Washer Head, Pd Shank, Corrosion and Heat Resistant Steel, Uns S41800, 140 Ksi Min, .1900-32 Unjf-3a 2012-11-01 00:00:00.0 Reaffirmed
AS9887A Bolt, Machine-Double Hexagon Extended Washer Head, PD Shank AMS5616, .3125-24 UNJF-3A 2018-08-23 00:00:00.0 Reaffirmed
AS9890B BOLT, MACHINE – DOUBLE HEXAGON EXTENDED WASHER HEAD, CRES UNS S41800, .5000-20 UNJF 2016-05-20 00:00:00.0 Revised
AS9894A BOLT, MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, AMS5616, .190-32 UNJF-3A 2015-03-01 00:00:00.0 Revised
AS9895B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, DRILLED, CORROSION RESISANT STEEL (UNS S41800), .2500-28 UNJF-3A 2017-06-29 00:00:00.0 Revised
AS9914B Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS6322, Cadmium Plated, .190-32 UNJF-3A 2012-10-15 00:00:00.0 Stabilized
AS9916A Bolt, Machine - Double Hexagon Extended Washer Head, PD Shank, Steel AMS6322, Cadmium Plated, .3125-24 UNJF-3A 2017-04-26 00:00:00.0 Reaffirmed
AS9917A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A 2013-04-02 00:00:00.0 Revised
AS9918A BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL SAE 8740, CADMIUM PLATED, 125 KSI MIN. UTS, .4375-20 UNJF-3A 2014-11-06 00:00:00.0 Revised
AS9923B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A 2015-07-23 00:00:00.0 Revised
AS9924B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A 2015-07-23 00:00:00.0 Revised
AS9928B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A 2015-09-25 00:00:00.0 Revised
AS9933B Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .250-28 UNJF-3A 2012-10-15 00:00:00.0 Stabilized
AS9944B BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A 2014-08-20 00:00:00.0 Stabilized
AS9947A Bolt, Machine - Double Hexagon Extended Washer Head, Full Shank, Steel AMS6322, Cadmium Plated, .5625-18 UNJF-3A 2013-03-12 00:00:00.0 Revised
AS9958A BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .250-28 UNJF-3A 2015-08-24 00:00:00.0 Revised
AS9964A BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .625-18 UNJF-3A 2013-04-22 00:00:00.0 Revised
MA1370 Screw Threads - MJ Profile, Metric 2018-08-23 00:00:00.0 Reaffirmed
MA1421A Aerospace Selected Diameter-Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads 2018-02-12 00:00:00.0 Stabilized
MA1508 Undercuts for Straight Screw Threads - Metric 2018-08-23 00:00:00.0 Reaffirmed
MA1518B Bolts, Screws and Nuts - External Wrenching, Metric Threads - Design Parameters for 2018-08-23 00:00:00.0 Reaffirmed
MA1520A Areas for Calculating Stress or Load Values for Metric MJ Externally Threaded Fasteners 2018-08-23 00:00:00.0 Reaffirmed
MA1549A Wrenching Configuration, 12 Spline, For Metric Threaded Fasteners 2018-01-19 00:00:00.0 Stabilized
MA1565C Inserts, Screw Thread, Helical Coil Metric Series, Procurement Specification For 2014-12-08 00:00:00.0 Stabilized
MA1566B Gaging Practice and Gage Requirements for MJ Metric Screw Threads 2018-07-16 00:00:00.0 Stabilized
MA1567B Insert, Screw Thread, Helical Coil, Metric Series, Standard Assembly Dimensions For 2018-08-23 00:00:00.0 Reaffirmed
MA1568A Nut, Self Locking - UNS S66286, 425°C & 650°C, 1100 MPa, MJ Thread, Procurement Specification For, Metric 2018-03-30 00:00:00.0 Stabilized
MA1573A Nut, Self-Locking - Steel, Class 1100 MPa/235 °C, MJ Thread Procurement Specification For, Metric 2016-11-15 00:00:00.0 Reaffirmed
MA1696A Screw Threads, Metric Buttress - MJB Profile 2012-11-08 00:00:00.0 Reaffirmed
MA1759A Center Hole, Metric 2012-11-08 00:00:00.0 Reaffirmed
MA1784A Spacers and Washers, Procurement Specification for, Metric 2018-10-16 00:00:00.0 Revised
MA1937A Nut, Hex, Free Running, Procurement Specification For, Metric 2018-01-29 00:00:00.0 Stabilized
MA1943B Nuts, Self-Locking, UNS N07001, 730 °C, 1100 MPa, and 1210 MPa, Procurement Specification for, Metric 2018-10-16 00:00:00.0 Revised
MA2536A Gasket, Metal C-Ring, Face Seal, Internal Pressure, UNS N07750, Silver Plated, Metric 2018-09-19 00:00:00.0 Stabilized
MA2537A Groove Design, Metal C-Ring Gasket, Face Type, Internal Pressure, Metric 2018-08-09 00:00:00.0 Stabilized
MA2538 Gasket, Metal C-Ring Seal Nickel Alloy, Corrosion and Heat Resistant, Metric Procurement Specification For 2015-04-29 00:00:00.0 Reaffirmed
MA3259B Pin, Cotter - Cres, UNS S32100, AS7211, Metric Series 2018-09-11 00:00:00.0 Stabilized
MA3265 Washer - Flat Load Spreading, Metric, AMS 5525 2012-11-08 00:00:00.0 Reaffirmed
MA3266A NUT, SELF-LOCKING – SPLINE DRIVE, EXTENDED WASHER UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2018-01-29 00:00:00.0 Stabilized
MA3274 Nut - Self-Locking, Clinch, Serrated Shank, 400 °C, Dry Film Coated, UNS S66286, MJ Thread, Metric 2012-11-08 00:00:00.0 Reaffirmed
MA3275 Nut - Self-Locking, Clinch, Serrated Shank, 650 °C, Silver Plated, UNS S66286, MJ Thread, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA3279C Insert, Screw Thread, Helical Coil, Metric Series, Free Running, CRES, Uncoated 2018-08-28 00:00:00.0 Revised
MA3280C INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, DRY FILM LUBRICATED 2018-02-15 00:00:00.0 Stabilized
MA3281C INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, FREE RUNNING, CRES, CADMIUM PLATED 2016-02-07 00:00:00.0 Revised
MA3286C BOLT, MACHINE - HEXAGON HEAD, PD SHANK, MJ THREAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 900 MPA MIN, METRIC 2018-02-24 00:00:00.0 Stabilized
MA3287A BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK LONG THREAD, AMS5731, METRIC 2018-02-12 00:00:00.0 Stabilized
MA3288A NUT, PLAIN HEX – UNS S66286, MJ THREAD, METRIC 2018-03-23 00:00:00.0 Stabilized
MA3289C BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS6322, CADMIUM PLATE, METRIC 2014-08-20 00:00:00.0 Stabilized
MA3302C NUT, PLAIN HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC 2014-08-20 00:00:00.0 Stabilized
MA3304B BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC 2013-03-18 00:00:00.0 Stabilized
MA3329D Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Uncoated 2018-08-23 00:00:00.0 Revised
MA3330C Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Dry Film Lubricated 2012-12-10 00:00:00.0 Reaffirmed
MA3331C Insert, Screw Thread, Helical Coil, Metric Series, Screw Locking, CRES, Cadmium Plated 2012-12-10 00:00:00.0 Reaffirmed
MA3338 BOLT, MACHINE-HEX HEAD, PD SHANK, LONG THREAD, AMS 5662, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3339C BOLT, MACHINE - SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, AMS6322, CADMIUM PLATED, METRIC 2014-08-20 00:00:00.0 Stabilized
MA3340C BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, AMS5662, METRIC 2017-04-07 00:00:00.0 Revised
MA3341 BOLT, MACHINE-SPLINE EXTENDED WASHER, FULL SHANK, LONG THREAD, AMS5731, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3342 BOLT, MACHINE-SPLINE EXTENDED WASHER, FULL SHANK, DRILLED, LONG THREAD, AMS5731, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3343 BOLT, MACHINE - SPLINE DRIVE EXTENDED WASHER, FULL SHANK, LONG THREAD, AMS 5662, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3344A NUT, PLAIN HEX - THIN, UNS S66286, MJ THREAD, METRIC 2018-03-04 00:00:00.0 Stabilized
MA3347 BOLT, MACHINE-HEX HEAD-FULL SHANK, LONG THREAD, AMS 5731, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3348 BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, AMS 5708, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3349A NUT, SELF LOCKING - REDUCED HEX DRIVE, UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2018-03-30 00:00:00.0 Stabilized
MA3350A NUT, CASTELLATED, HEX - UNS S66286, MJ THREAD, METRIC 2018-02-12 00:00:00.0 Stabilized
MA3351 Nut, Spline Drive - Extended Washer, Cupwasher Lock, UNS S66286, Silver Plate, MJ Thread, Metric 2013-10-28 00:00:00.0 Reaffirmed
MA3353C NUT, SELF LOCKING – SPLINE DRIVE, EXTENDED WASHER, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC 2016-07-26 00:00:00.0 Revised
MA3354C NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC 2014-08-20 00:00:00.0 Stabilized
MA3365 BOLT, MACHINE - HEX HEAD, DRILLED, FULL SHANK, LONG THREAD, AMS 5731, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3366 BOLT, MACHINE - SPLINE DRIVE EXTENDED WASHER, DRILLED HEAD, FULL SHANK, LONG THREAD, AMS 5662, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3367C BOLT, MACHINE - SPLINE DRIVE HEAD, DRILLED, PD SHANK - LONG THREAD AMS6322, CADMIUM PLATED, METRIC 2014-08-20 00:00:00.0 Stabilized
MA3368 BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, DRILLED, AMS5662, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3369 BOLT, MACHINE-HEX HEAD, DRILLED, PD SHANK, LONG THREAD, AMS 5662, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3371 BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, DRILLED, PD SHANK, LONG THREAD, AMS 5708, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3374D Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric 2018-08-09 00:00:00.0 Revised
MA3375D Studs, Corrosion and Heat Resistant Steel, UNS S66286, Tensile Strength 900 MPa, Procurement Specification, Metric, FSC 5307 2018-05-16 00:00:00.0 Revised
MA3376C Bolts & Screws, UNS G87400 Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric 2018-03-04 00:00:00.0 Stabilized
MA3377C Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa, Procurement Specification, Metric 2018-03-23 00:00:00.0 Stabilized
MA3378D Bolts and Screws, UNS N07001, Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled Before Aging, Procurement Specification, Metric 2018-01-19 00:00:00.0 Stabilized
MA3379 Stud, Straight - 2.5 Dia Engagement, A286, MJ Metric, 6 X 1 - 6 X 1 2013-10-28 00:00:00.0 Reaffirmed
MA3380 Stud, Straight - 2.5 DIA Engagement, A286, MJ Metric, 7 X 1 - 7 X 1 2013-10-28 00:00:00.0 Reaffirmed
MA3381 Stud, Straight - 2.5 DIA Engagement, A286, MJ Metric, 8 X 1 - 8 X 1 2013-10-28 00:00:00.0 Reaffirmed
MA3382 Stud, Straight - 2.5 DIA Engagement, A286, MJ Metric, 10 X 1.25 - 10 X 1.25 2013-10-28 00:00:00.0 Reaffirmed
MA3383A STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 5 X 0.8 2014-12-05 00:00:00.0 Stabilized
MA3384A STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 6 X 1 2014-12-05 00:00:00.0 Stabilized
MA3385A STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 - 7 X 1 2014-12-05 00:00:00.0 Stabilized
MA3386A STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 8 X 1 2014-12-05 00:00:00.0 Stabilized
MA3387A STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 - 10 X 1.25 2014-12-05 00:00:00.0 Stabilized
MA3388A STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC, 6 X 1 - 5 X 0.8 2015-01-09 00:00:00.0 Stabilized
MA3389A STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 6 X 1 2014-12-05 00:00:00.0 Stabilized
MA3390A STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC, 8 X 1 - 7 X 1 2015-01-09 00:00:00.0 Stabilized
MA3391A STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC, 10 X 1.25 - 8 X 1 2015-01-09 00:00:00.0 Stabilized
MA3392A STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 - 10 X 1.25 2014-12-05 00:00:00.0 Stabilized
MA3398 BOLT, MACHINE-HEX HEAD-DRILLED, PD SHANK, LONG THREAD, AMS5731, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3421B NUT, PLAIN HEX - DRLD, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC 2013-03-18 00:00:00.0 Stabilized
MA3422A NUT, PLAIN HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2016-04-10 00:00:00.0 Revised
MA3423A NUT, PLAIN HEX - DRLD, UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2015-07-28 00:00:00.0 Stabilized
MA3424A NUT, PLAIN HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2016-01-09 00:00:00.0 Revised
MA3425B NUT, CASTELLATED, HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC 2013-03-18 00:00:00.0 Stabilized
MA3426A NUT, CASTELLATED, HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2016-04-10 00:00:00.0 Revised
MA3427B Nut, Castellated, Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric 2013-06-18 00:00:00.0 Stabilized
MA3428B NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2016-04-29 00:00:00.0 Revised
MA3429A NUT, SELF LOCKING, SPLINE DRIVE, EXTENDED WASHER, UNS N07001, SILVER PLATE, MJ THREAD, METRIC 2014-12-08 00:00:00.0 Stabilized
MA3430B Nut, Self Locking-Reduced Hex Drive, AMS 6322, Cadmium Plated, MJ Thread, Metric 2013-06-18 00:00:00.0 Stabilized
MA3433A Nut, Self Locking - Shank UNS N07001, Silver Plate MJ Thread, Metric 2014-12-08 00:00:00.0 Stabilized
MA3437 Spacer, Sleeve - for 5 mm Bolt, AMS4901 or AMS4921, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA3438 Spacer, Sleeve - for 6 mm Bolt, AMS4901 or AMS4921, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA3441 Washer-Key, Cup Lock, AMS5510, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA3444A NUT, SELF LOCKING - SPLINE DRIVE, CAPTIVE WASHER, UNS S66286, SILVER PLATE, MJ THREAD, METRIC 2014-12-08 00:00:00.0 Stabilized
MA3446A BOLT, MACHINE - TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 °C CLOSE TOL SHANK, UNS N07001, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3447 BOLT, MACHINE - SPLINE DRIVE HD, CLOSE TOL FULL SHANK, AMS-5662, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3448 BOLT, SPLINE DRIVE SPECIAL EXTENDED WASHER HEAD, REDUCED HEAD, PD SHANK, AMS 5708, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3449 BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, REDUCED HEAD, RETAINER LOCKED, PD SHANK, AMS 5708, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3450 Retainer, Nut and Bolt, Cup Lock, 5 mm and 6 mm, AMS 5510, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA3453 Washer, Flat, AMS-5525, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA3454B Cover - Engine Accessory Drive, Square, 127.28 BC, Metric, AMS4424 (UNS M11630) or AMS4484 2018-09-17 00:00:00.0 Stabilized
MA3471A Gasket - Engine Accessory Drive, Square, 127.28 BC, Metric 2018-07-25 00:00:00.0 Stabilized
MA3476 BOLT, MACHINE - SPLINE EXTENDED WASHER, FULL HEAD, PD SHANK, LONG THREAD, AMS 5662 - METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA3512 Bolt, Machine - Spline Drive HD, Close Tol Full Shank, UNS N07001, Metric 2013-10-28 00:00:00.0 Reaffirmed
MA3513 Bolt, Machine - Spline Drive Extended, Washer Hhead, PD Shank, Long Thread, UNS N07001, Metric 2013-10-28 00:00:00.0 Reaffirmed
MA3520A INSERT - THIN WALL, SHORT SELF-LOCKING, 550 °C, SILVER PLATED UNS N07718, MJ THREAD, METRIC 2014-12-08 00:00:00.0 Stabilized
MA3521A INSERT - THIN WALL, LONG SELF-LOCKING, 550 °C, SILVER PLATED UNS N07718, MJ THREAD, METRIC 2014-12-08 00:00:00.0 Stabilized
MA3574 Rivet-Solid, Universal Head, AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4016 Ring, Retaining - External, Spiral Wound, Heavy and Medium Duty CRES, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4017 Ring, Retaining - Internal, Spiral Wound, Heavy and Medium Duty CRES, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4018 Pin, Straight, Headless, AMS 5688, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4019 Pin, Straight, Headless, AMS 5732, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4020 Ring, Retaining, External, Tapered, Type I, Class 2, AMS 5520, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4021 Ring, Retaining - Internal, Tapered, Type I, Class 1, AMS 5520, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4029 Ring, Retaining - Internal, Beveled, Tapered, Type II, Class 1, AMS 5520, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4030 Ring, Retaining - External, Reinforced E-Ring, Type I, Class 3, AMS 5520, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4035 Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4036 Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4037A Washer, Key - 90° Locking, CRES, UNS S32100, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4038B Washer, Key - 180° Locking, CRES, UNS S32100, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4039A Washer, Key - 270° Locking, CRES, UNS S32100, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4040A Washer, Key - Dual Locking Positions, CRES, UNS S32100, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4044A NUT, SPANNER - END SLOTS, CUPWASHER LOCKED, UNS S66286, SILVER PLATED, MJ THREAD, METRIC 2018-02-24 00:00:00.0 Stabilized
MA4045 Washer, Cup, Lock - Spanner Nut, AMS 5646, Metric 2012-12-10 00:00:00.0 Reaffirmed
MA4070 Pins, Procurement Specification For, Metric 2013-10-28 00:00:00.0 Reaffirmed
MA4147 Bolt, Spline Drive, Extended Washer, Reduced Shank, AMS 5662, Metric 2013-10-28 00:00:00.0 Reaffirmed
MA4177 NUT, SELF LOCKING - HEX EXTENDED WASHER UNS N07001, SILVER PLATE, MJ THD, METRIC 2014-10-21 00:00:00.0 Reaffirmed
MA4187 BOLT, MACHINE, SPLINE DRIVE, SPECIAL EXTENDED WASHER, REDUCED HEAD, PD SHANK, AMS 5662, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA4189 SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC 2015-05-03 00:00:00.0 Reaffirmed
MA4284 Areas for Calculating Stress or Load Values for Metric MJ Internally Threaded Fasteners 2018-08-23 00:00:00.0 Reaffirmed
MA4368A Nut, Plain, Round - Spanner Wrenching, Shaft Mounted, UNS S66286, Procurement Specification For, Metric 2018-03-30 00:00:00.0 Stabilized
MA4811 Insert - Thin Wall, Self-Locking, Metric, Short and Long Length, Installation and Removal Of 2018-08-23 00:00:00.0 Reaffirmed
MA4812 Insert - Thin Wall, Metric, Short and Long, Hole Preparation For 2018-08-23 00:00:00.0 Reaffirmed
MA7211A Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For 2018-08-23 00:00:00.0 Reaffirmed
MAP1670A Studs, Installation Practice for Interference Fit - Metric 2015-08-14 00:00:00.0 Stabilized
MAP1753B Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment 2018-08-09 00:00:00.0 Stabilized