SAE Standards Works
AMS F Corrosion Heat Resistant Alloys Committee
AMS5637J - Steel, Corrosion Resistant, Bars and Wire, 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn, 125 ksi (862 Mpa) Tensile Strength
Not available for purchase at this time.
Steel, Corrosion Resistant, Bars and Wire, 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn, 125 ksi (862 Mpa) Tensile Strength
This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides.<p>These products have been used typically for small parts, such as bolts, screws, and clevis pins, requiring corrosion resistance up to 700 degrees F (371 degrees C) and which may be fabricated by heading or by machining from bars or wire and roll threading, but usage is not limited to such applications.
AMS5637J results from a Five Year Review and update of this specification.
. All rights reserved.
Intellectual Property Policy
Terms & Conditions