SAE Standards Works
AC-9C Aircraft Icing Technology Committee
ARP5905A - Calibration and Acceptance of Icing Wind Tunnels
Not available for purchase at this time.
Laura E. Steen
Calibration and Acceptance of Icing Wind Tunnels
<p>This SAE Aerospace Recommended Practice (ARP) document provides recommended practices for the calibration and acceptance of icing wind tunnels to be used in testing of aircraft components and systems and for the development of simulated ice shapes. This document is not applicable to air-breathing propulsion test facilities configured for the purposes of engine icing tests. Use of facilities as part of an aircraft's ice protection Certification Plan should be reviewed and accepted by the applicable regulatory agency prior to testing. Following acceptance of a test plan, data generated in these facilities may be submitted to regulatory agencies for use in the certification of aircraft ice protection systems and components. Certain types of tests may be appropriate in facilities with capabilities that are not as rigorously characterized as by the practices defined herein, and the acceptability of these tests should be coordinated with the applicable regulatory agency.</p>
The committee agreed some components of the document were missing and were of great enough importance to require a revision. Namely, this document does not give enough address to icing tunnels with altitude capabilities, it does not specify the implementation of a test section centerline air temperature correction, the spray durations specified in section 8.2.2 are described inaccurately, and the liquid water content instruments described in Appendix A need to be revised based on more current instruments and practices.
. All rights reserved.
Intellectual Property Policy
Terms & Conditions