SAE International
SAE Standards Works
SAE International
Contact Us | Help | Shopping Cart
SAE Login

AS81934C - Bearings, Sleeve, Plain and Flanged, Self-Lubricating

Details
Not available for purchase at this time.
Document Number: AS81934C
Project Initiation: 2017-11-15 12:15:03.0
Project Number: AS81934C
Revision Number: C
Sponsor Name:
Title
Bearings, Sleeve, Plain and Flanged, Self-Lubricating
Scope
<p>This standard covers plain and flanged sleeve bearings which are self-lubricating by incorporating polytetrafluoroethylene (PTFE) in a liner in the bore for use in the temperature range of -65 to +325 °F.</p>
Rationale
<p>This document includes limited scope changes to the following sections in response to comments from the approved Rev. C ballot (April 2019): 3.6.2, 4.3.1, 4.3.3, 4.6.6.2, and Figure 1. Previously approved changes from Rev. B to Rev. C: Updating the high/sub-zero temperature test methods, room temperature break-in cycles, qualification requirements by similarity to AS81820 for CRES substrates, and test pin and housing tolerances. Adding/updating fluid contaminants and specifying type and concentration of anti-icing fluid to be used for testing. Adding retention of qualification requirements for aluminum substrate. Clarifying tables and text to address conflicting requirements for number of qualification test samples required. Clarifying when LN2 exposure is required.</p>
Recent Activity
DateType