Instrumentation for Impact Test-Part 1-Electronic Instrumentation
This recommended practice outlines a series of performance recommendations, which concern the whole data channel. These recommendations are not subject to any variation and all of them shall be adhered to by any agency conducting tests to this practice. However, the method of demonstrating compliance with the recommendations is flexible and can be adapted to suit the needs of the particular equipment the agency is using.
It is not intended that each recommendation be taken in a literal sense, as necessitating a single test to demonstrate that the recommendation is met. Rather, it is intended that any agency proposing to conduct tests to this practice shall be able to demonstrate that if such a single test could be and were carried out, then their equipment would meet the recommendations. This demonstration shall be undertaken on the basis of reasonable deductions from evidence in their possession, such as the results of partial tests.
In some systems it may be necessary to divide the whole channel into subsystems, for calibration and checking purposes. The recommendations have been written only for the whole channel, as this is the sole route by which subsystem performances affect the quality of the output. If it is difficult to measure the whole channel performance, which is usually the case, the test agency may treat the channel as two or more convenient subsystems. The whole channel performance could then be demonstrated on the basis of subsystem results, together with a rationale for combining the subsystem results together.
Part 1 of this recommended practice covers electronic instrumentation and Part 2 covers photographic instrumentation.
Rationale:Rationale (from Apr06 draft)
Revisions to J211 are a continuing process and are considered at each five year review. Changes were made as part of an ongoing effort of harmonization with ISO 6487 and include additional definitions, tightening of the filter corridors, procedures for verifying system performance, changes and additions to CFC recommendations, specification of transducer equivalency, and changes to data format recommendations.
Also known as: SAE J 211/1
Subscribers can view annotate, and download all of SAE's content.
Learn More »