Search Results

This paper describes a bumper system designed to meet the current FMVSS (Federal Motor Vehicle Safety Standard) and ECE42 legislation as well as the European Enhanced Vehicle Safety Committee (EEVC) requirements for lower leg pedestrian impact protection [1] (The EEVC was founded in 1970 in response to the US Department of Transportation's initiative for an international program on Experimental Safety Vehicles. The EEVC steering committee, consisting of representatives from several European Nations, initiates research work in a number of automotive working areas. These research tasks are carried out by a number of specialist Working Groups who operate for over a period of several years giving advice to the Steering Committee who then, in collaboration with other governmental bodies, recommends future courses of action designed to lead to improved safety in vehicles).

Automotive styling and performance trends continue to challenge engineers to develop cost effective bumper systems that can provide efficient energy absorption and also fit within reduced package spaces. Through a combination of material properties and design, injection-molded engineering thermoplastic (ETP) energy absorption systems using polycarbonate/polybutylene terephthalate (PC/PBT) alloys have been shown to promote faster loading and superior energy absorption efficiency than conventional foam systems. This allows the ETP system to provide the required impact protection within a smaller package space. In order to make optimal use of this efficiency, the reinforcing beam and energy absorber (EA) must be considered together as an energy management system. This paper describes the development of a predictive tool created to simplify and shorten the process of engineering efficient and cost effective beam/EA energy management systems.

There are several key issues to consider when designing a bumper system within today's automotive environment. These include impact efficiency, corporate average fuel economy (CAFE), federal requirements, and independent consumer agency requirements. Impact efficiency of a bumper system is critical for three reasons. First, it enables vehicles to absorb more energy in less packaging space. Second, with CAFE a high priority, thermoplastic bumper systems provide an excellent opportunity to reduce vehicle mass, and improve CAFE ratings when they replace conventional steel foam systems. Finally, the system needs to meet Federal Motor Vehicle Safety Standards (FMVSS) part 581 and Insurance Institute for Highway Safety (IIHS) requirements. The bumper system described in this paper offers the ability to achieve each of these goals and remain cost competitive.

This paper will discuss, compare, and contrast current materials, designs, and manufacturing options for fuel filler doors. Also, it will explore the advantages of using conductive thermoplastic substrates over other materials that are commonly used in the fuel filler door market today. At the outset, the paper will discuss the differences between traditional steel fuel filler doors, which use an on-line painting process, and fuel filler doors that use a conductive thermoplastic substrate and require an in-line or off-line painting process. After reviewing the process, this paper will discuss material options and current technology. Here, we will highlight key drivers to thermoplastics acceptance, and look at the cost saving opportunities presented by the inline paint process option using a conductive thermoplastic resin, as well as benefits gained in quality control, component storage and coordination.

The history behind Polymer Class “A” Body Panels for automotive applications is very interesting. The driving factors behind these applications have not changed significantly over the past sixty years. Foremost among these factors is the need for corrosion and dent resistance. Beginning with Saturn in 1990, interest in polymer body panels grew and continues to grow up to the present day, with every new global application. Today, consumers and economic factors drive the industry trend towards plastic body panels. These include increased customization and fuel economy on the consumer side. Economic factors such as lower unit build quantities, reduced vehicle mass, investment cost, and tooling lead times influence material choice for industry. The highest possible performance, and fuel economy, at the lowest price have always been a goal.

There are a multitude of opportunities to utilize two-shot or overmolding technology in the automotive industry. Two-shot or overmolding a thermoplastic elastomer onto a rigid substrate can produce visually appealing, high quality parts. In addition, use of this technology can offer the molder significant reductions in labor and floor space consumption as well as a reduction in system cost. Traditionally, two-shot applications were limited to olefinbased TPE's and substrates, which often restricted rigidity, structure and gloss levels. With the development of thermoplastic elastomers that bond to engineering thermoplastics, two-shot molding can now produce parts that require higher heat, higher gloss and greater structural rigidity. This paper will outline engineering thermoplastics that bond with these new elastomers, discuss potential applications, and review circumstances that offer the best opportunity to call upon the advantages of two-shot and overmolding technology.

This paper describes a bumper system design that satisfies both current FMVSS legislation as well as the European Enhanced Vehicle Safety Committee (EEVC) requirements for lower leg pedestrian impact protection. The dual performance solution is achieved through a combination of material properties and design. Using Computer Aided Engineering (CAE) modeling, the performance of an injection molded energy absorber (EA) was analyzed for pedestrian protection requirements of knee bending angle, knee shear displacement, and tibia acceleration, 4Kph pendulum and barrier impacts (ECE42, FMVSS), and 8Kph pendulum and barrier impacts (CMVSS, FMVSS). The results demonstrate how an injection molded EA using polycarbonate/polybutyelene terephthalate (PC/PBT) resin (Figure 1) can meet both FMVSS and pedestrian safety requirements and can do so within a packaging space typical of today's vehicle styling.

An Instrument Panel (IP) cockpit is one of the most complex vehicle systems, not only because of the large number of components, but also because of the numerous design variations available. The OEM can realize maximum benefit when the IP cockpit is assembled as a module. This requires increased performance attributes including safety, durability, and thermal performance, while meeting styling and packaging constraints, and optimizing the program imperatives of mass and cost. The design concept discussed in this paper consists of two main injection molded parts that are vibration welded to form a stiff structure. The steering column is attached to the cowl and plastic structure by a separate steel column support. The plastic IP structure with integrated ducts is designed and developed to enable the IP cockpit to be a modular system while realizing the benefits of mass and cost reduction.

The aesthetic requirements for rear combination lamps have risen due to the increased use of optic free lens. The objective of this study was to develop a methodology to characterize the relative aesthetic performance for thermoplastic resins utilized for rear combination lamp housings. This study focuses upon the use of a direct metallization process. The results of this study will allow project engineers to better understand the relative performance of various materials.

Automobile headlamps are highly controlled products that must meet various performance standards to be commercialized. The combination of the bulb and lens must emit acceptable color and light output. Commercially available headlamps use different types of bulbs but usually a clear or slightly tinted lens. In the past few years, high performance bulbs have been used. These are known as HID or xenon lamps and are characterized by their bluer color compared to standard halogen bulbs. This paper explores some of the possibilities that new lens material can offer in terms of design and aesthetics with little or no impact on lighting performance as tested per the Society of Automotive Engineers (SAE) J1383 [1]. Light stability of these new lens materials is also discussed.

The automotive industry is continually striving for opportunities to take additional cost and mass out of vehicle systems. Large parts such as an Instrument Panel retainer are good candidates because a small percent reduction in mass can translate into a significant material mass savings. Multiple requirements for a soft instrument panel including safety, stiffness, adhesion, etc. can make these savings difficult to achieve. This paper will describe how a new material and process development for the fabrication of a soft instrument panel can produce 50% weight savings with a 20% cost reduction potential. In addition, this new technology exhibits improved performance over existing materials during safety testing.

Three commonly used energy management systems (expanded polypropylene foam, collapsing honeycomb and hydraulic shock absorbers) were fully characterized in 2.2 m/s pendulum bumper impact testing. This work was done to better understand the dynamic energy transfer and absorption of the system components and any synergies which exist between them. The test results showed that the energy absorbing systems which exhibited the best load and deflection performance when considered as individual components do not always work the most synergistically with the reinforcement beam. Simply examining the energy absorber's performance alone did not truly reflect the ability of the beam/absorber system's ability to manage energy.

The automotive industry continues to strive for mold-in-color (MIC) solutions that can provide metallic flake appearances. These MIC solutions can offer a substantial cost out opportunity while retaining a balance of weathering performance and physical properties. This paper discusses a predictive engineering package used to hide, minimize and eliminate flow lines. Material requirements and the methods used to evaluate flowline reduction and placement for visual inspection criteria are detailed. The Nissan Quest® luggage-rack covers are used to illustrate this application. The paper also explores how evolving predictive packages offer expanding possibilities.

Recent vehicle design trends require bumper systems to be crashworthy under more demanding circumstances, e.g. tighter package space, heavier vehicle mass, and wider rail spans. Meanwhile, pressure to reduce cost and weight of bumpers continues at a time when roles in the supplier community are changing. These factors have combined to increase the importance of optimizing bumper design and material properties for specific platforms. Materials suppliers have responded by developing a range of specialized engineering thermoplastic (ETP) resins that can help meet increasing performance requirements yet also offer the potential for improved manufacturing productivity, significant weight savings, and systems cost reductions. Material suppliers have also increased the level of technical design support provided to OEMs and 1st Tier suppliers.

This paper documents the design methodology, part performance, and economic considerations for a generic hardware module applied to a front passenger-car door. Engineering thermoplastics (ETPs), widely used in automotive applications for their excellent mechanical performance, design flexibility, and parts integration, can also help advance the development of modular door-hardware systems. Implementation of these hardware carriers is being driven by pressures to increase manufacturing efficiencies, reduce mass, lower part-count numbers, decrease warranty issues, and cut overall systems costs. In this case, a joint team from GE Plastics, Magna-Atoma International/Dortec, and Excel Automotive Systems assessed the opportunity for using a thermoplastic door hardware module in a current mid-size production vehicle. Finite-element analysis showed that the thermoplastic module under study withstood the inertial load of the door being slammed shut at low, room, and elevated temperatures.

A technique for estimating the lateral loads exerted on the vehicle frame during centerline pendulum impacts has been developed. These loads can either be determined by sophisticated hand calculations or by using beam finite-element analysis. The loads can either be determined as a fraction of the peak impact load, or as an absolute number. The dependence of the lateral load on frame stiffness, bumper cross-section, and bumper sweep will be shown to be quite dramatic.

Engineering thermoplastics are being used increasingly in automotive exterior body applications; most of these applications require that the panels be painted “on line” with the rest of the car body at relatively high temperatures. The high temperatures associated with the painting/conditioning of the car have been shown to cause dimensional stability problems on automotive fenders molded from NORYL GTX®. This paper contains the results of an extensive FEA investigation targeted at determining what factors cause dimensional problems in fenders exposed to high heat. The ABAQUS FEA software was used to perform computer simulations of the process and the C-PACK/W software was used to determine molded in stress values.

The C-section bumper design has developed through an evolutionary process and has come to be regarded as a reasonable geometry for frontal bumper impacts, especially for use with glass-filled sheet-stampable thermoplastic composite materials. C-section bumpers are now well proven and accepted in the automotive industry, performing satisfactorily in a variety of crash situations. A new and more complicated cross-section geometry (I-type with multiple ribbing) has recently been proposed for glass-filled thermoplastic composites. While, in some specialized cases, these highly engineered bumper cross-sections can be useful, they may not perform adequately in all reasonable crash scenarios. Further, it is important to consider manufacturing limitations and the realities of material performance in such complex geometries. Data will be presented to question the practical advantages of the use of ribbed bumper designs over the traditional C-section beam.

The gas injection molding process created a great deal of interest when it was first introduced, especially on the part of the automotive plastics industry. The process allows injection molders to make larger parts with increased rigidity at lower clamping pressures. This, in turn, allows parts to be molded that have not previously been able to be created. However, the process has been hampered by problems. First and foremost have been the numerous patent infringement suits and licensing difficulties that have retarded the spread of the technology in the United States. Second, technological problems - such as controlling the seemingly erratic nature of the gas - have also been an issue. As with any new molding technology, the plastics industry is still attempting to establish logical techniques to set up and rationalize processing conditions for the method.

Gas-assist injection molding is a relatively new process. It is an extension of conventional injection molding and allows molders to make larger parts having projected areas or cross sectional geometries not previously possible using existing equipment. However, controlling the injection of the gas has been a concern. The plastics industry is attempting to establish logical techniques to set up and rationalize processing conditions for the method. Although gas injection equipment permits a number of adjustments, an optimum processing window must be established to provide control and repeatability of the process to mold consistent, acceptable parts. This paper describes a strategy and equipment for rationalizing and accurately controlling gas injection processing conditions that are applicable regardless of the type of molding machine or processing license a molder is using.