Search Results

Standard

Application Layer—Generator Sets and Industrial

2007-06-21

HISTORICAL

J1939/75_200706

The SAE J1939 documents are intended for light, medium, and heavy-duty vehicles used on or off road as well as appropriate stationary applications which use vehicle derived components (e.g., Generator sets). Vehicles of interest include, but are not limited to: on- and off-highway trucks and their trailers, construction equipment, and agricultural equipment and implements. The purpose of these documents is to provide an open interconnect system for electronic systems. It is the intention of these documents to allow Electronic Control Units to communicate with each other by providing a standard architecture. This particular document, SAE J1939-75, describes the parameters and parameter groups that are predominantly associated with monitoring and control generators and driven equipment in electric power generation and industrial applications.

Standard

J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Pontiac Solstice and Saturn Sky Level 2

2007-06-19

CURRENT

CPGM2_08LE5SOLS

This product includes information on the manufacturer, engine, applications, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds. In addition, this product contains complete engine information such as displacement, cylinder configuration, valve train, combustion cycle, pressure charging, charge air cooling, bore, stroke, cylinder numbering convention, firing order, compression ratio, fuel system, fuel system pressure, ignition system, knock control, intake manifold, exhaust manifold, cooling system, coolant liquid, thermostat, cooling fan, lubricating oil, fuel, fuel shut off speed, etc. Also included are all measured test parameters outlined in J2723.

Standard

J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet Cobalt Level 1

2007-06-19

CURRENT

CPGM1_08LE5COBA

This product includes information on the manufacturer, engine, application, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds.

Standard

J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet HHR Level 1

2007-06-19

CURRENT

CPGM1_08LE5HHR

This product includes information on the manufacturer, engine, application, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds.

Standard

J1349 Certified Power Engine Data for GM LAT Ecotec as used in 2008 Saturn Vue Level 1

2007-06-19

CURRENT

CPGM1_08LATVUE

This product includes information on the manufacturer, engine, application, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds.

Standard

J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Pontiac Solstice and Saturn Sky Level 1

2007-06-19

CURRENT

CPGM1_08LE5SOLS

This product includes information on the manufacturer, engine, application, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds.

Standard

J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet HHR Level 2

2007-06-19

CURRENT

CPGM2_08LE5HHR

This product includes information on the manufacturer, engine, applications, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds. In addition, this product contains complete engine information such as displacement, cylinder configuration, valve train, combustion cycle, pressure charging, charge air cooling, bore, stroke, cylinder numbering convention, firing order, compression ratio, fuel system, fuel system pressure, ignition system, knock control, intake manifold, exhaust manifold, cooling system, coolant liquid, thermostat, cooling fan, lubricating oil, fuel, fuel shut off speed, etc. Also included are all measured test parameters outlined in J2723.

Standard

J1349 Certified Power Engine Data for GM 2.4L LE5 Ecotec as used in 2008 Chevrolet Cobalt Level 2

2007-06-19

CURRENT

CPGM2_08LE5COBA

This product includes information on the manufacturer, engine, applications, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds. In addition, this product contains complete engine information such as displacement, cylinder configuration, valve train, combustion cycle, pressure charging, charge air cooling, bore, stroke, cylinder numbering convention, firing order, compression ratio, fuel system, fuel system pressure, ignition system, knock control, intake manifold, exhaust manifold, cooling system, coolant liquid, thermostat, cooling fan, lubricating oil, fuel, fuel shut off speed, etc. Also included are all measured test parameters outlined in J2723.

Standard

J1349 Certified Power Engine Data for GM LAT Ecotec as used in 2008 Saturn Vue Level 2

2007-06-19

CURRENT

CPGM2_08LATVUE

This product includes information on the manufacturer, engine, applications, testing location, certified maximum horsepower, certified maximum torque along with the certified curves of horsepower and torque over a wide range of engine RPM speeds. In addition, this product contains complete engine information such as displacement, cylinder configuration, valve train, combustion cycle, pressure charging, charge air cooling, bore, stroke, cylinder numbering convention, firing order, compression ratio, fuel system, fuel system pressure, ignition system, knock control, intake manifold, exhaust manifold, cooling system, coolant liquid, thermostat, cooling fan, lubricating oil, fuel, fuel shut off speed, etc. Also included are all measured test parameters outlined in J2723.

Standard

Detailed Specification for Aircraft Pressure Refueling Nozzle

2007-06-19

HISTORICAL

AS5877A

This SAE Aerospace Standard (AS) prescribes requirements for the various types of nozzles that are used for the refueling of aircraft fitted with pressure fuel servicing systems. It is to be used as a replacement for MIL-N-5877, MS29520 and for all commercial applications.

Standard

Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure, Metric (SI) Measurement

2007-06-18

CURRENT

MAM2300D

This specification covers steel cleanliness requirements in metric (SI) units for premium aircraft-quality ferromagnetic steels, other than hardenable, corrosion-resistant steels, by magnetic particle inspection methods.

Standard

Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure Metric (SI) Measurement

2007-06-18

CURRENT

MAM2301C

This specification covers steel cleanliness requirements in SI (metric) units for aircraft-quality ferromagnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods.

Standard

Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and Wire, Extruded

2007-06-18

CURRENT

AMSQQA200/10A

This specification covers the specific requirements for aluminum alloy 6066 bar, rod, shapes, tube, and wire produced by extrusion.

Standard

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 6262

2007-06-18

CURRENT

AMSQQA225/10A

This specification covers the specific requirements for 6262 aluminum alloy bar, rod, and wire produced by rolling, drawing or cold finishing.

Standard

Steel Bars, Alloy, Chromium, High Carbon E52100 (Aircraft Quality)

2007-06-18

CURRENT

AMSS7420B

This specification covers the requirements for high-carbon chromium alloy steel bars of aircraft quality, for bearing applications.

Standard

Aluminum 7075, Plate and Sheet, Alclad 7011

2007-06-18

CURRENT

AMSQQA250/26B

This specification covers the specific requirements for aluminum alloy, 7011 alclad, 7075 plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy 7075 core with thin layers of a 7011 aluminum alloy anodic to the core and of approximately equal thickness, bonded to both surfaces.

Standard

Aluminum Alloy 6162, Bar, Rod, Shapes, Tube, and Wire, Extruded

2007-06-18

CURRENT

AMSQQA200/17A

This specification covers the specific requirements for aluminum alloy 6162 bar, rod, shapes, tube, and wire produced by extrusion.

Standard

A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Knowledge Competencies

2007-06-18

CURRENT

ARP5602/3

This document establishes training guidelines applicable to fiber optic fabricator technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production

Standard

A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Fabricator Hands-on Competencies

2007-06-18

CURRENT

ARP5602/4

This document establishes training guidelines applicable to fiber optic fabricator technical training for individuals involved in the manufacturing, installation, support, integration and testing of fiber optic systems. Applicable personnel include: Managers Engineers Technicians Trainers/Instructors Third Party Maintenance Agencies Quality Assurance Production

Standard

Tolerances, Metric, Carbon Steel, Sheet, Strip, and Plate

2007-06-18

CURRENT

MAM2232C

This specification covers established metric manufacturing tolerances applicable to carbon steel sheet, strip, and plate ordered to metric dimensions. These tolerances apply to all conditions unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified range. Tolerances for product sizes not listed herein shall be as agreed upon by purchaser and vendor.