Search Results

Standard

MAGNETIC PARTICLES, NONFLUORESCENT Dry Method

1995-12-01

HISTORICAL

AMS3040B

This specification covers nonfluorescent, magnetic particles having black, red, gray, or other color, as specified, supplied in the form of dry powders.

Magazine

Aerospace Engineering 1995-12-01

1995-12-01

Magazine

Automotive Engineering 1995-12-01

1995-12-01

Standard

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 72Ni - 3.0Mn - 20Cr - 2.5Cb

1995-12-01

HISTORICAL

AMS5836A

This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire.

Magazine

Off-Highway Engineering 1995-12-01

1995-12-01

Standard

BUS BODY HEATING SYSTEM TEST

1995-12-01

HISTORICAL

J2233_199512

This SAE Recommended Practice, limited to liquid coolant systems, establishes uniform cold weather bus vehicle heating system test procedures for all vehicles designed to transport 10 or more passengers. Required test equipment, facilities, and definitions are included. Defrosting and defogging procedures and requirements are established by SAE J381 and SAE J382, which are hereby included by reference.

Standard

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, BARS, FORGINGS, AND RINGS 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed

1995-12-01

HISTORICAL

AMS5887A

This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

Standard

ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 29Fe - 22Cr - 21 Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La - 0.20N

1995-12-01

HISTORICAL

AMS5831A

This specification covers a corrosion and heat resistant alloy in the form of welding wire.

Standard

NICKEL-IRON ALLOY, CORROSION AND HEAT RESISTANT, BARS AND FORGINGS 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated

1995-12-01

HISTORICAL

AMS5660H

This specification covers a corrosion and heat resistant nickel-iron alloy in the form of bars, forgings, and forging stock.

Standard

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, PLATE 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Annealed

1995-12-01

HISTORICAL

AMS5888A

This specification covers a corrosion and heat resistant nickel alloy in the form of plate.

Standard

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 72Ni - 15.5Cr - 1.0Cb - 2.4Ti - 0.70Al - 7.0Fe

1995-12-01

HISTORICAL

AMS5778D

This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire.

Standard

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al

1995-12-01

HISTORICAL

AMS5839

This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire.

Standard

NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SHEET AND STRIP 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed

1995-12-01

HISTORICAL

AMS5889A

This specification covers a corrosion and heat resistant nickel alloy in the form of sheet and strip.

Technical Paper

Developing the EV Charging Infrastructure

1995-12-01

952769

An important part of the electric vehicle (EV) system is the charging infrastructure: the equipment, standards, and procedures needed to safely and conveniently connect an EV to the electric power supply. This paper summarizes charging modes and equipment being developed for charging EVs at home, public facilities, and electric service stations. It reports on development of cords and connecting devices and their electrical ratings. It also reports on efforts to modify electrical and building codes that impede EV commercialization. The paper concludes that key elements of the charging infrastructure can be ready when EVs are marketed.

Standard

TITANIUM ALLOY, FORGINGS 10V - 2Fe - 3Al Consumable Electrode Melted, Single Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength

1995-12-01

HISTORICAL

AMS4987A

This specification covers a titanium alloy in the form of forgings under 4.0 inches (102 mm) in nominal cross-sectional thickness and of forging stock.

Standard

NICKEL-IRON ALLOY, MAGNETIC, SHEET AND STRIP 50Ni - 50Fe Stamping Quality

1995-12-01

HISTORICAL

AMS7719C

This specification covers a magnetic nickel-iron alloy in the form of sheet and strip.

Standard

DIMENSIONS—WHEELS FOR DEMOUNTABLE RIMS, DEMOUNTABLE RIMS, AND SPACER BANDS—COMMERCIAL VEHICLES

1995-12-01

HISTORICAL

J851_199512

This SAE Recommended Practice establishes dimensions for wheels for demountable rims, demountable rims, and rim spacers. The dimensions given are those necessary to maintain serviceability and interchangeability of the demountable rims, rim spacers, and wheels for demountable rims. Special and less common applications are not covered in this recommended practice.

Standard

NUT, FITTING, LIGHTWEIGHT, FLARELESS

1995-12-01

HISTORICAL

AS1792C

Standard

STEEL, CORROSION RESISTANT, FLAT WIRE 18Cr - 9.0Ni (SAE 30302) Spring Temper

1995-12-01

HISTORICAL

AMS5866B

This specification covers a corrosion-resistant steel in the form of flat wire.

Standard

IRON-NICKEL ALLOY, HEAT RESISTANT, BARS, WIRE, FORGINGS, AND RINGS 44Fe - 18.5Cr - 35.5Ni - 1.1 Si Solution Heat Treated

1995-12-01

HISTORICAL

AMS5716G

This specification covers a heat-resistant iron-nickel alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging or flash welded rings.