Search Results

Functionalities such as automated driving, connectivity and cyber-security have gained increasing importance over the past few years. The importance of these functionalities will continue to grow as these cutting-edge technologies mature and market acceptance increases.

AVSC Information Report for Change Risk Management AVSC00010202304 provides a process for change risk management for fleet-operated ADS-DVs using level 4 or 5 automation. The document addresses risks resulting from planned and unplanned changes in an ADS-DV design and/or operation. This information report is based on the concept of risk-informed decision-making. Making risk management decisions such as safety and change management, safety analysis, and safety assurance are especially applicable when moving from concept to production intent for the ADS-DV. Change Risk Management (CRM) does not replace best practices or other methods for managing safety anomalies or change management processes. It may instead be viewed as an additional resource that elaborates on how safety anomaly management and change management can be performed.

SAE EDGE Research Reports provide examinations significant topics facing mobility industry today including Connected Automated Vehicle Technologies Electrification Advanced Manufacturing

Abstract Over the past forty years, the Electronic Control Unit (ECU) technology has grown in both sophistication and volume in the automotive sector, and modern vehicles may comprise hundreds of ECUs. ECUs typically communicate via a bus-based network architecture to collectively support a broad range of safety-critical capabilities, such as obstacle avoidance, lane management, and adaptive cruise control. However, this technology evolution has also brought about risks: if ECU firmware is compromised, then vehicle safety may be compromised. Recent experiments and demonstrations have shown that ECU firmware is not only poorly protected but also that compromised firmware may pose safety risks to occupants and bystanders.

October 29-31, 2019 │ Novi, MI

October 29-31, 2019 │ Novi, MI

To better inform and equip mobility engineers dealing with these challenges, SAE International has released a new book series from Juan R. Pimentel that explores automated vehicle safety concepts and technologies.

Steer-by-wire stars on the new Lexus RZ 450e Lexus' first BEV arrives with innovative touches, dual-axle propulsion and less-than-spectacular range. Rethinking the grid for EVs Interoperability and 'smart' energy management are vital for meeting EV charging demand. Designing for 200 BMEP and 22,000 RPM How Honda's Grand Prix motorcycle program in the 1960s created the world's most-advanced IC engines. Spelling Ford with an 'e' Ford Motor Co.'s new Model e team aims to transform the 120-year-old auto giant. Meet some of its new technology leaders. Chamber made to protect EV batteries With the ACS Dust Chamber, testing to ISO 20653 helps ensure EV battery housing designs will keep out dust and small particulates.

Looking past ADAS Advances in perception hardware and software deliver new performance possibilities - and a refreshed vision for passenger-vehicle driving automation. Provizio eyes safety with radar, not lidar Provizio promises its 5D Perception stack can safely compete with expensive lidar sensors at a fraction of the cost. Can solid-state batteries commercialize by 2030? Solid-state batteries are facing a reckoning as OEMs attempt to commercialize the technology. Editorial Change?

SAE Standards News VS committees fully engaged on cybersecurity. Honda's new 10-speed is a slick shifter SAE Level 3 'hand off' challenging AI researchers Lightweight door module aims to trim vehicle weight Exclusive first drive: Torotrak's V-Charge technology New 10-speed auto delights in 2017 Ford F-150 Power and more underscore 2018 Toyota Camry I.D.

Leaf turns to the 2020s Nissan's pioneering battery-EV finally gets styling, propulsion and feature upgrades that put it back in the thick of the expanding electric-car race. A rebel's guide to chassis engineering Before the advent of FEA, engineers used their hands to study chassis strength and stiffness. The approach still offers benefits today, notes the man who wrote chassis engineering's "bible." Auto tech comes on strong at CES 2018 The automotive sector showed up at CES with autonomy announcements by the score and a spectrum of new-technology unveilings. New SAE President focused on Big Data Mircea Gradu, senior VP and quality chief at lidar specialist Velodyne, targets data analytics, electrification and connectivity, and STEM initiatives during his 2018 term.

Truck Tech War! Ford, GM, and Ram arm their profit-pumping half-ton pickups for the 2020s' efficiency battle. Mobility mecca: WCX 2018 Provocative thought leaders, emerging disruptors, and the industry's best networking and career guidance all under one big roof: the 2018 SAE World Congress Experience is coming April 10-12. Mercedes adopts Harman UX for A-Class The 'smart' architecture is capable of OTA updates and features more-accurate voice recognition. Spark of genius Mazda's Skyactiv-X-the nexus of gasoline and diesel tech-remains on track for 2019 production. We test-drive recent prototypes to check development status. Taking aim at the drowsy-driver threat Hyundai Mobis is leveraging Level 4 tech to move 'departed' drivers safely off the road. Editorial: Fear and loathing on the path to Level 4 driving Supplier Eye Variability, risk and the value stream The Navigator How will automated vehicles deal with potholes?

New dawn at Honda R&D President Yoshiyuki Matsumoto aims to invigorate Honda's technology and product-development organization with 'full soul.' Automated driving meets regulation: NHTSA and the next 50 years The challenges and opportunities on the road to 'zero deaths' demand a new level of federal automotive safety technical standards, and a new safety-defect reporting and recall system. NHTSA and the U.S. Congress must act boldly and quickly to make it happen. Autonomous driving meets regulation: Hands off, eyes off, brain off Euro NCAP'S president warns that without coherent policies, the growing availability of automated technologies may result in piecemeal technology development-and unintentional consequences. Designer yin meets engineer yang Efficient and effective vehicle development means even closer collaboration between the two former sparring partners.

Finding solutions for Sustainable Mobility SAE created its SMS team to help industry rethink itself as part of the new industrial revolution and the EV transition within it. Debarbonizing the EV battery supply chain Altering manufacturing processes and using a much higher percentage of low emission energy can help the battery industry get greener rapidly, according to a new McKinsey & Co. report. Europe's dust buster The pending Euro 7 vehicle-emissions regulations include a significant new sustainability wrinkle: first-ever restrictions for PM emissions from brakes. E-fueling for the future The development of carbon-neutral e-fuels enjoyed a major boost from European regulators, but production cost and scale remain issues. Fuels to transition the global legacy fleet The EV bandwagon has obscured potential solutions for decarbon-izing the enormous global ICE legacy fleet.

700 miles, hands-free! GM's Super Cruise turns Cadillac drivers into passengers in a well-engineered first step toward greater vehicle autonomy. Toyota rethinks the Flagship The 2018 Lexus LS moves to twin-turbo V6 power and piles on the takumi. Honda 2018 Accord: Antidote for crossover fever The all-new, tenth-generation Accord is Honda's best-ever-and makes the case for why crossovers shouldn't take over the planet. Autonomy testing: Simulation to the rescue Autonomous technology development injects new rigors on vehicle-development testing.

High on hydrogen Through its Symbio joint venture with Michelin, Faurecia expands far beyond its interior-systems base into the fuel-cell future. Simulating a faster route to ADAS and AV validation With its new cloud-based Simphera platform, dSpace responds to demand from global automated-vehicle development teams to help manage their expanding, complex workload. Innovating the methanol fuel cell Using methanol as the source fuel provides an alternative to a gaseous-hydrogen distribution and storage infrastructure, among other potential benefits. Engineering the 2022 Toyota Tundra Chief Engineer Mike Sweers talks structure, materials and a different approach to hybrid power.

2016 Malibu sheds 300 lb, adds new hybrid system More wheelbase, style, fuel economy, and comfort aim to move GM's volume midsize sedan from the sidelines to the fast lane. Lighter, more powerful 2016 Honda Pilot The third-generation SUV gets a sleek new look and plenty of slick technology for enhanced performance and safety. 2016 Mazda MX-5 stays true to its roots Mazda engineers give the industry a lesson in getting more from less. 2016 Land Rover Discovery Sport spearheads more efficient Land Rovers JLR's space-efficient, flexible SUV moves to JLR's new Ingenium modular engines. Audi chooses high technology, cautious design evolution for new A4 In addition to lighter weight and significant improvements in efficiency, the new car employs plenty of technology and driver support.

Steering Mazda's unique course A chassis engineer at heart, Chairman Seita Kanai challenges his engineers to think differently and embrace the Skyactiv technology that has made Mazda a benchmark. Delphi's multi-domain mindset From tackling the cyber threat to putting 48-volt hybrids with Dynamic Skip-Fire on the road, Engineering VP Mary Gustanski is harnessing a technology powerhouse. The evolving tire-development paradigm Advanced tire-simulation modeling allows tire development to keep pace with accelerated vehicle-development cycles. MEMS the word for next-gen HUDs New high-speed, quad-channel laser diode drivers are designed to beat the LCD and DLP incumbents for next-gen vehicle head-up displays.

Editorial Follow the money The Navigator C-V2X is finally gaining momentum in the U.S. Making the Strategic Move Into AV Testing Having built its global engineering reputation in the combustion-engine era, FEV makes a critical leap into automated-vehicle testing. Sony Jumps Into AV Sensors, Software The consumer-electronics giant leverages its innovative technologies for ADAS prototypes and partners with Hungary-based AImotive for automated-driving software. Mitigating Radar-to-Radar Interference An effective radar interference mitigation strategy should have the right balance between complexity and capability for dealing with the interferers. Amending the Automated-driving 'Constitution' SAE International's J3016 standard has been comprehensively revised with new distinctions and definitions. The Committee chairperson, Barbara Wendling, addresses the fine points behind the industry-defining - and perpetually controversial - classification for automated-driving capability.