Search Results

Artificial Intelligence in the Battlespace Key Considerations for a New Way of Fighting War Machining Beryllium Electrified Propulsion for Aerospace Where to Start The Future of Managing Mission-Critical Systems Improving Battlefield Connectivity for the Modern Warfighter How to Test a Cognitive EW System Molded RF Materials for Hypersonic Sensors and Seekers AUVSI XPONENTIAL Multimode Optical Fiber Sensing Although the vast majority of fiber optic strain sensors use single mode fiber, multimode fiber has a higher nonlinear threshold that enables higher light levels and lower noise, while the diversity of spatial modes can be used to develop sensors that are inherently immune to signal fading.

Electrifying Aviation: The Path to Decarbonizing the Skies /Electric aviation mirrors the early stages of the electric vehicle revolution Advances in Military Avionics Technologies Create New Challenges for RF Test and Measurement Plasma Electrolytic Oxidation: The Future of Lightweight Designs in Aerospace and Defense Advanced RF Simulation Reduces Cost and Schedule Risk Assure 5G NTN Performance Before Launch In the complex and quickly evolving 5G NTN landscape, simulating, emulating, and evaluating RF systems boosts mission success. Qualification of Multi-Channel Direction Finding Radar Receivers in The Lab Bullet Impact Testing of Ammunition and Explosives at Picatinny Arsenal A bullet impact (BI) test for evaluating the response of energetically loaded items has been established at the U.S. Army Combat Capabilities Command (DEVCOM) Armaments Center (AC) Explosive Development Facility.

Empowering Soldiers Through ISPDS Dispensable Gels vs Gap Filler Pads An Analysis of Thermal Management Materials Electronic Warfare Vying for Control of the Electromagnetic Spectrum More Bang for the Buck A New Design and Manufacturing Method for Deep Penetrating Bomb Cases A Comprehensive Way to Use Bonding to Improve RF Performance of Low Noise Amplifiers Army and Universities Deploy New Warfighter Communication Technology Radiation Effects on Electronics in Aligned Carbon Nanotube Technology (RadCNT) Characterizing the fundamental mechanisms and charge transport phenomena governing the interactions between ionizing and non-ionizing radiation with carbon-based (nanotube and graphene) field-effect transistors (FETs) devices and integrated circuits (ICs).

Explosion suppressant arresting foam Technological refinements over three decades have enabled a family of polyerethane foams to aid in the prevention of catastrophic explosions caused by electrical arching, lightning strikes, and static electrical discharge. Improving SA via HUD Engineers from Honeywell and BAE Systems address the saftety and avionics issues inherent in the anticipated increase in air traffic.

Showing how it's done Engineers are using software to better manage product development data, and applying tools to a new class of problems. NASA goes deep The agency's new long-term space exploration program starts with a return to the moon and will ultimately enable future exploration of Mars and other solar system destinations. Farnborough preview In an event that happens just once every two years, bringing the multitudes together, it is important to get as much technology as possible into the open and to find solutions to hard problems. Seats under crash loading The FAA and academia have conducted aircraft seat drop tests to compare and contrast passenger crash protection. A fluid approach Aerospace engineers have started using CFD software earlier and earlier in the design process.

Swiss air navigation service provider, skyguide, AirMap, Inc. – the leading global airspace intelligence platform for drones, and the Swiss Federal Office of Civil Aviation (FOCA) have deployed the Swiss U-space flight information management system (FIMS) for small unmanned aircraft systems (UAS) and drones.

This SAE Aerospace Information Report (AIR) covers the field of civilian, commercial and military airplanes and helicopters. This summary of tail bumper design approaches may be used by design personnel as a reference and guide for future airplanes and helicopters that require tail bumpers. Those described herein will consist of simple rub strips, structural loops with a wear surface for runway contact, retractable installations with replaceable shock absorbers and wear surfaces and complicated retractable tail landing gears with shock strut, wheels and tires. The information will be presented as a general description of the installation, its components and their functions.

Abstract Jet engine hot parts (e.g., jet nozzle) are a crucial source of aircraft’s infrared (IR) signature from the rearview, in 1.9-2.9 μm and 3-5 μm bands. The exhaust nozzle design used in a jet aircraft affects its performance and IR signature (which is also affected just by performance) from the engine layout. For supersonic aircraft (typically for M ∞ > 1.5), a converging-diverging (C-D) nozzle is preferred over a convergent nozzle for optimum performance. The diverging section of the C-D nozzle has a full range of visibility from the rearview; hence, it was not considered a prudent choice for low IR observability. This theoretical study compares the IR signature of the C-D nozzle with that of the convergent nozzle from the rearview in 1.9-2.9 μm and 3-5 μm bands for the same thrust.

Toyota punches innovations pedal From hybrids to robots, Toyota promises new ways of thinking to produce new and better products. Hyundai dreams As part of an internal competition, Hyundai designers let their minds wander through time, space, and perhaps some new dimension to conjure concepts that seem outlandish today. Maza fired up about internal combustion There is room in the market for hybrids and all-electric vehicles, but Mazda believes that internal-combustion engine offers the biggest bang for the buck. Helping hands Engineering consulting service providers expect to help OEMs meet greater fuel efficiency and tighter emissions standards. The upside ofdownsizing Hybrid powertrains are undergoing huge changes as successive generations emerge, increasing efficiency and offering better performance, with component sizes shrinking as engineers make changes that address cost.

Helicopter manufacturer and Textron Inc. subsidiary, Bell Flight, is adding a new piece of standard equipment to its Bell 407GXi single-engine, civil utility helicopter program: bird-deterring, pulsing lights.

Officials and engineers at Boeing in Seattle are offering a glimpse into their vision for hypersonic air travel. They have released, for the first time, images of one of the company’s hypersonic air vehicle concepts for potential military and commercial passenger transport. ...They have released, for the first time, images of one of the company’s hypersonic air vehicle concepts for potential military and commercial passenger transport.

The AS2 from Aerion in Reno, Nevada, will be the first supersonic business jet to market, Boeing officials in Chicago predict. Boeing (NYSE:BA) is providing engineering, industrial, and financial resources in partnership with Aerion to accelerate technology development and aircraft design, with the goal of bringing supersonic air travel to new markets.

Boeing and SparkCognition are collaborating on unmanned aircraft system (UAS) traffic management (UTM) solutions that leverage artificial intelligence (AI) and blockchain technologies to track unmanned air vehicles in flight and allocate traffic corridors and routes to ensure safe, secure transportation.

Austrian telematics company, Dolphin Technologies GmbH, has created a new cryptocurrency that could lead to less mobile phone-related traffic accidents. The company’s Mobilio app rewards drivers with points when they ignore their mobile phones while driving.

The numerical analysis is carried out for one-dimensional, steady hypersonic flows with non-equilibrium chemical reactions of hot air, including the evaluation of radiation intensity.

This SAE Aerospace Recommended Practice (ARP) provides guidance for substantiating the airworthiness of aircraft engine components. Generally these components are associated with the engine control system, the system or systems that allow the engine to provide thrust or power as demanded by the pilot of the aircraft while also ensuring the engine operates within acceptable operating limits. But these components may also include hardware and systems associated with engine lubrication, engine or aircraft hydraulic or electrical systems, aircraft environmental control systems, thrust reverser control, or similar aircraft or engine propulsion system functions. This paper develops the concept of using a 26 item matrix of environmental conditions for evaluating aircraft engine component airworthiness. This approach is compatible with current practices used in the industry and has been accepted by engine certification authorities as part of engine certification programs.

This Recommended Practice is intended to outline the design, installation, testing, and field maintenance criteria for a high temperature metal pneumatic duct system, for use as a guide in the aircraft industry. These recommendations are to be considered as currently applicable and necessarily subject to revision from time to time, as a result of the rapid development of the industry.

This Icing Technology Bibliography is a compendium of references from the open literature that were published prior to the original 1987 issuance of the AIR, including both national and foreign sources. Due to the generality of the subject, and the difficulty of fully investigating every available source, the Bibliography in this document is not intended to be complete.