Search Results

This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted.

This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.

This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted.

This standard specifies a procedure for approximating the volume of materials contained in the grapple of bucket linkage operated grapples mounted to excavators. The volume ratings are based on the inside dimensions of the grapple and representative volumes extending beyond the grapple. The method employs the technique of dividing the complex shape of the material in the grapple into simple geometric forms to allow volume calculations of different grapple configurations. The rating method is intended to provide a consistent means of comparing grapple capacities. It is not intended to define actual capacities that might be observed in any specific application.

This standard applies to hydraulically operated backhoes (as defined in SAE J1116) This standard describes a uniform "over end" and "full swing arc" lifting capacity rating for backhoes. It is based on the actual capacity of the machine to lift and support a load under stable conditions. Rated lift capacities will be specified for both the boom and the dipperstick and will be shown on a lift capacity chart Figure 1.

This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.

This standard applies to hydraulic excavators as defined in SAE J1057 and J1193.

This SAE Standard provides a uniform method to calculate the lift capacity of scrap and material handlers, establishes definitions and specifies machine conditions for the calculations. This document applies to scrap and material handlers as defined in SAE J2506 that have a 360 degrees continuous rotating upper structure. It does not apply to equipment that is incapable of lifting a load completely off the ground. This document applies to those machines that are crawler, wheel, rail and pedestal or stationary mounted.

This SAE Standard describes a uniform method to calculate and specify travel performance characteristics of hydraulic excavators, material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to crawler mounted machines such as hydraulic excavators as defined in SAE J/ISO 6165 and ISO 7135, and knuckle boom log loaders as defined in SAE J1209 and SAE J2055. This document also applies to certain forestry equipment defined in SAE J1209 and ISO 6814 that have crawler mountings such as delimbers, feller bunchers, harvesters, and processors. Included in the definition of hydraulic excavators are also front shovel, clamshell, and telescoping boom excavators.

This document applies to all hydraulic excavators and backhoes that are either crawler mounted or rubber tire mounted, with or without outrigger members, identified in SAE J1116 as earthmoving machines and defined in SAE J/ISO 6165.

This SAE Standard includes the names of major components and parts peculiar to this type of machine. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document.

This SAE Standard provides a uniform method for determining rated and struck capacity for buckets used on excavators, mini-excavators, and backhoes as defined in SAE J1057 and equipped with hoe attachment. Calculations are based on the inside physical dimensions of the bucket only, without use of optional side cutters, spill guards, teeth, or other accessories and without regard to bucket action provided by any specific machine. This document does not cover shovel, clam, or dragline buckets described in SAE J67 or loader buckets described in SAE J742.

This SAE Standard provides a uniform method for calculating and specifying travel performance characteristics of hydrostatically driven crawler mounted hydraulic excavators as defined in SAE J1057.

This standard applies to hydraulic excavators as defined in SAE J1057 and J1193.

This standard applies to hydraulically operated backhoes (see SAE J49). This standard describes a uniform "over end" and "full swing arc" lifting capacity rating for backhoes. It is based on the actual capacity of the machine to lift and support a load under stable conditions. Rated lift capacities will be specified for both the boom and the dipperstick and will be shown on a lift capacity chart Figure 1.

This recommended practice applies to hydraulic excavators as defined in SAE Standard J1057, which are crawler mounted. It describes the methods for calculating and specifying travel performance characteristics. It does not apply to wheel mounted excavators.

This recommended practice applies to mobile excavators, as defined in SAE J1057-Identification Terminology of Earthmoving Machines.

This recommended practice applies to hydraulic excavators as defined in SAE Standard J1057.

This recommended practice applies to hydraulic excavators as defined in SAE J1057. This recommended practice includes the nomenclature peculiar to and most commonly used to describe this type of equipment. The illustrations are not intended to be descriptive of any existing machine and are used only to clarify the meaning of this recommended practice. The numbered terms are nomenclature and apply to Figs. 1–6 as applicable. The single letter dimensions apply to Figs. 1, 2, and 3 and are primarily to define vehicle size. The double letter dimensions apply to Figs. 4, 5, and 6 which illustrate the functional range of the common types of hydraulic excavators. For dimensions relative to turning radius of rubber tired vehicles, refer to SAE J695. All dimensions are based on machines setting on a groundline that provides firm level support. Rubber tired vehicles are on manufacturers specified tires inflated to specified pressure, crawler track shoes do not penetrate groundline.