Search Results

Crash data stored in the airbag sensing and diagnostic modules (SDMs) of General Motors vehicles can provide useful information for accident investigators. To quantify the accuracy and sensitivity of select 2003 to 2004 SDMs, two types of tests were performed. First, three 2004 vehicles underwent 136 vehicle-to-barrier and vehicle-to-vehicle collisions with speed changes up to 8 km/h. Second, 2003 and 2004 model year SDMs underwent a range of crash pulses using a linear sled. In all of the tests the speed change reported by the SDM underestimated the actual speed change. The speed change underestimates ranged from 0.2 to 2.9 km/h except for several anomalous tests in which the underestimate was as high as 12.3 km/h. The magnitude of this error varied with crash pulse shape. Increasing crash pulse duration and decreasing peak acceleration increased the difference between the actual and SDM reported speed change. The threshold accelerations for the SDMs tested ranged from 1.1 to 2.7g.

Collision data stored in the airbag sensing and diagnostic module (SDM) of 1996 and newer GM vehicles have become available to accident investigators through the Vetronix Crash Data Retrieval system. In this study, two experiments were performed to investigate the accuracy and sensitivity of the speed change reported by the SDM in low-speed crashes. First, two SDM-equipped vehicles were subjected to 260 staged frontal collisions with speed changes below 11 km/h. Second, the SDMs were removed from the vehicles and exposed to a wide variety of collision pulses on a linear motion sled. In all of the vehicle tests, the speed change reported by the SDM underestimated the actual speed change of the vehicle. Sled testing revealed that the shape, duration and peak acceleration of the collision pulse affected the accuracy of the SDM-reported speed change. Data from the sled tests were then used to evaluate how the SDM-reported speed change was calculated.

The purpose of this paper was to compare the damage to pickup truck bumpers produced by vehicle-to-barrier and vehicle-to-vehicle collisions of a similar severity, in order to determine whether vehicle-to-barrier tests can serve as surrogates for vehicle-to-vehicle tests in accident reconstruction. Impact tests were conducted on the front and rear bumpers of five pickup trucks. Each truck was subjected to an impact with a fixed barrier and with a passenger vehicle. All impacts resulted in pickup truck speed changes of about 8 km/h. Damage produced in the barrier and vehicle-to-vehicle collisions was similar if both collisions resulted in bumper mount damage on the pickup truck. If there was no bumper mount damage, then the bumper beam deformation depended on the shape of the impactor.