Search Results

Vehicle rear structure stiffness has increased as a result of the requirements in the FMVSS 301R, which has also corresponded to an increase in front-row seat strength. This study evaluates the structural behavior and occupant response associated with production-level seats equipped with body-mounted D-rings, and very stiff all-belt-to-seat (ABTS) in a group of 12 deceleration sled tests. A double-haversine pulse with approximately 100-msec duration was used for all tests, with peak accelerations of approximately 19 g for the 40 km/h (25 mph) tests and peak accelerations of 28 g for the 56 km/h (35 mph) test. This generic pulse was designed to represent a severe rear impact crash involving vehicles with stiffer rear structures. The tests compared occupant responses and resulting structural deformation of an original equipment manufacturer (OEM) production-level driver seat from a pickup and a very stiff modified ABTS. Both seating systems were equipped with dual recliners.

Occupant kinematics during rollover motor vehicle collisions have been investigated over the past thirty years utilizing Anthropomorphic Test Devices (ATDs) in various test methodologies such as dolly rollover tests, CRIS testing, spin-fixture testing, and ramp-induced rollovers. Recent testing has utilized steer maneuver-induced furrow tripped rollovers to gain further understanding of vehicle kinematics, including the vehicle's pre-trip motion. The current study consisted of two rollover tests utilizing instrumented test vehicles and instrumented ATDs to investigate occupant kinematics and injury response throughout the entire rollover sequences, from pre-trip vehicle motion to the position of rest. The two steer maneuver-induced furrow tripped rollover tests utilized a mid-sized 4-door sedan and a full-sized crew-cab pickup truck. The pickup truck was equipped with seatbelt pretensioners and rollover-activated side curtain airbags (RSCAs).

It is well known from field accident studies and crash testing that seatbelts provide considerable benefit to occupants in rollover crashes; however, a small fraction of belted occupants still sustain serious and severe neck injuries. The mechanism of these neck injuries is generated by torso augmentation (diving), where the head becomes constrained while the torso continues to move toward the constrained head causing injurious compressive neck loading. This type of neck loading can occur in belted occupants when the head is in contact with, or in close proximity to, the roof interior when the inverted vehicle impacts the ground. Consequently, understanding the nature and extent of head excursion has long been an objective of researchers studying the behavior of occupants in rollovers.

Previous literature has shown that serious neck injury can occur during rollover events, even for restrained occupants, when the occupant's head contacts the vehicle interior during a roof-to-ground impact or contacts the ground directly through an adjacent window opening. Confusion about the mechanism of these injuries can result when the event is viewed from an accelerated reference frame such as an onboard camera. Researchers generally agree that the neck is stressed as a result of relative motion between head and torso but disagree as to the origin of the neck loading. This paper reviews the principles underlying the analysis of rollover impacts to establish a physical basis for understanding the source of disagreement and demonstrates the usefulness of physical testing to illustrate occupant impact dynamics. A series of rollover impacts has been performed using the Controlled Rollover Impact System (CRIS) with both production vehicles and vehicles with modified roof structures.

While previous studies have recognized and demonstrated the upward and outward occupant motion that occurs during the airborne phase of rollover and estimated the resulting head excursion using static and dynamic approaches, the effect of roll rate on restrained occupant head excursion has not been comprehensively evaluated. Moffatt and colleagues recently examined head excursions for near- and far-side occupants resulting from steady-state roll velocities using a laboratory fixture and both Hybrid III anthropomorphic test dummies (ATD) and human volunteers. To expand upon that study, a MADYMO computational model of a rolling airborne vehicle was developed to more thoroughly evaluate the effects of roll rate on occupant kinematics and head excursion. The interior structure of the vehicle used by Moffatt et al. was modeled, and the ATD kinematics observed in that experimental study were used to validate the computational models of the current study.

Three rollcaged and three production roof vehicles were exposed to matched-pair rollover impacts using the Controlled Rollover Impact System (CRIS). The roof-to-ground contacts were representative of severe impacts in previous rollover testing and real world rollovers. The seat belted dummies measured nearly identical head impacts and neck loads with or without the rollcage, despite significant roof crush in the production roof vehicles. Roof crush had no measurable influence on the severity of the head accelerations and neck loads.