Search Results

Test methods for vehicle safety development are either based on the movement of a vehicle into a stationary barrier or the movement of a barrier into a stationary vehicle. When deemed necessary, a two-moving-vehicle impact is approximated by modifying the impact motion between the moving and stationary objects. For example, the Federal Motor Vehicle Safety Standard (FMVSS) 214 side-impact crash test procedure [1] approximates the lateral impact of a moving vehicle into the side of another moving vehicle by using a moving barrier with wheels crabbed so that the velocity vector of the barrier is not collinear with its longitudinal axis. Such approximations are valid when the post-impact motions of the two vehicles are not to be evaluated. Similarly, the published data indicates that historic analyses of motorcycle accidents and the advancements in motorcycle safety designs have been based, in large part, on single-moving-vehicle crash tests.

To date, the most commonly used rollover test device has been the rollover dolly described in the SAE J2114 recommended practice, which is commonly referred to as the “208 rollover dolly.” However, for a number of reasons, the rollover dolly has never been accepted as a standard for rollover testing. One of the primary limitations of the rollover dolly has been the controllability of the first roof-to-ground impact. A new rollover test device, known as the Controlled Rollover Impact System (CRIS), was presented at the SAE Congress in March 2001. This device allows the roll, pitch, and yaw angles, roll rate, translational velocity, and drop height of the vehicle to be specified for the first roof-to-ground impact. One objective of the current study was to compare the vehicle dynamics produced by each test device using an Econoline-350 van as the test vehicle.