Search Results

With low-temperature combustion engine research reaching an applicable level, physics-based control-oriented models regain attention. For reactivity controlled combustion concepts, chemical kinetics-based multizone models have been proven to reproduce the governing physics for performance-oriented simulations. They offer accuracy levels similar to high-fidelity computational fluid dynamics (CFD) models but with a fraction of their computational effort. Nevertheless, state-of-the-art reactivity controlled compression ignition (RCCI) simulations with multizone model toolchains still face challenges related to predictivity and calculation speed. This study introduces a new multizone modelling framework that addresses these challenges. It includes a C++ code, deeply integrated with open-source, thermo-kinetic libraries, and coupled to an industry standard 1-D modelling framework.

In this work the pre- to main chamber ignition process is studied in a Wärtsilä 34SG spark-ignited lean burn four-stroke large bore optical engine (bore 340 mm) operating on natural gas. Unburnt and burnt gas regions in planar cross-sections of the combustion chamber are identified by means of planar laser induced fluorescence (PLIF) from acetone seeded to the fuel. The emerging jets from the pre-chamber, the ignition process and early flame propagation are studied. Measurements reveal the presence of a significant temporal delay between the occurrence of a pressure difference across the pre-chamber holes and the appearance of hot burnt/burning gases at the nozzle exit. Variations in the delay affect the combustion timing and duration. The combustion rate in the pre-chamber does not influence the jet propagation speed, although it still has an effect on the overall combustion duration.

The main benefit of HCCI engines compared to SI engines is improved fuel economy. The drawback is the diluted combustion with a substantially smaller operating range if not some kind of supercharging is used. The reasons for the higher brake efficiency in HCCI engines can be summarized in lower pumping losses and higher thermodynamic efficiency, due to higher compression ratio and higher ratio of specific heats if air is used as dilution. In the low load operating range, where HCCI today is mainly used, other parameters as friction losses, and cooling losses have a large impact on the achieved brake efficiency. To initiate the auto ignition of the in-cylinder charge a certain temperature and pressure have to be reached for a specific fuel. In an engine with high in-cylinder cooling losses the initial charge temperature before compression has to be higher than on an engine with less heat transfer.