Search Results

A single-cylinder, 500cc research engine was tested under Spark-Ignition (SI) and Controlled Auto-Ignition (CAI) operation with similar load and speed conditions. Camshafts with low-lift and short duration, run with a negative valve overlap, were used to obtain CAI at wide open throttle. Two different camshaft profiles were tested in order to get a wide span of loads at 1200 and 2000rpm. The SI engine was Port Fuel-Injected (PFI) while the CAI engine was tested with both PFI and an Orbital Air-Assist Direct-Injection (DI) system. To reduce the high Indicated Specific Nitrogen Oxide (ISNOx) emissions at λ=1, 10% External Exhaust Gas Residuals (EEGR) was applied to the SI engine. EEGR reduced ISNOx emissions and there was slight reduction in ISFC. However, when the engine was tested in CAI mode, both ISNOx and ISFC were lower than the SI engine.

The harsh environment presented by engines, particularly in the exhaust systems, often necessitates the use of robust and therefore low bandwidth temperature sensors. Consequently, high frequencies are attenuated in the output. One technique for addressing this problem involves measuring the gas temperature using two sensors with different time-constants and mathematically reconstructing the true gas temperature from the resulting signals. Such a technique has been applied in gas turbine, rocket motor and combustion research. A new reconstruction technique based on difference equations has been developed and its effectiveness proven theoretically. The algorithms have been successfully tested and proven on experimental data from a rig that produces cyclic temperature variations. These tests highlighted that the separation of the thermocouple junctions must be very small to ensure that both sensors are subjected to the same gas temperatures.