Search Results

With drastically reduction of engine noise, the gear rattle noise generated by the impact between neutral gears inside transmission can be much easily perceived. It is well known that the torsional mode has a direct relationship with the transmission gear rattle noise. This paper establishes a torsional model of a front wheel drive automotive drivetrain, including clutch system, transmission box and equivalent load of a full vehicle, in AMESim software. The experimental engine speed fluctuations at different gears are used to excite the torsional model. The influences of several parameters, including flywheel inertia, clutch stiffness, clutch hysteresis and drive shaft stiffness, on the 2nd order (major engine firing order for a 4-cylinder-4-stroke engine) torsional resonant frequency and the 2nd order torsional resonant peak of the transmission input shaft are analyzed by changing them alternatively.

The paper describes the identification and control methods of turbocharger surge noise. Some parameters, such as temperature, flow quantity, pressure, vibration, turbocharger rpm and noise, are provided to identify surge noise. The advantages and disadvantages for each parameter are analyzed. The paper identifies that some special vehicle interior noise is contributed by turbocharger surge noise by using correlation analysis of the turbocharger inlet temperature, outlet pressure and vehicle internal noise. Spectral filtration analysis shows that the surge noise frequency components are above 1000Hz with wide frequency band. Quarter wave tuner's effective frequency range is found to be consistent with the surge noise frequency band. A panfluter-resonator which is a combination of several special quarter wave tuners is invented to diminish the wide band high frequency noise.

The paper analyzes the characteristics of driveline torsional vibration of a RWD vehicle and provides the control methods of transmission rattle noise caused by the system torsional resonances. A driveline dynamic model of the RWD vehicle is established by multi-body dynamic method. The natural frequencies and modal shapes are calculated for each gear position and torsional vibration responses are predicted by forced vibration analysis. The system sensitivity and DOE are analyzed based on the parameterized stiffness, inertia and damping. The 2nd and 3rd order modal results show that the transmission shaft possesses the maximum amplitudes and its corresponding modal frequencies vary with different gear position. The sensitivity analysis results show that the system torsional vibration is significantly reduced by reducing clutch stiffness, increasing propeller shaft stiffness, raising half shaft stiffness, increasing the input shaft inertia and increasing the clutch damping.

This paper introduces a cumulative effort on the phenomenon of exhaust flow exited noise. The mechanisms of engine combustion noise via the exhaust system and flow excited noise are analyzed. Engine combustion noise contributes most to tailpipe noise at lower engine speed while flow excited noise dominates the tailpipe noise at high engine speed. WAVE model, a one dimension CFD and Acoustics model, is used to distinguish the engine combustion noise and flow excited noise. Both CAE and tests based results are used to draw conclusions. The influence of single system and quasi-dual system on the tailpipe noise is compared with each other. The paper analyzes the balance of different diameter pipes to achieve the desired sound at different rpm range. The evaluation balance between interior sound and tailpipe noise is described.