Search Results

In order to face the new challenges, spark ignition engines are evolving by following some strategies and technologies. Among them, alternative combustion processes based on the dilution of the homogeneous mixture, either with fresh air or with Exhaust Gas Recirculation (EGR), are being explored. In a higher or lower extent, these changes modify in-cylinder thermodynamic conditions during the engine operation (pressure, temperature and gas composition) thus conditioning the spark ignition system requirements that will have to evolve to become more reliable and powerful. In this framework, an experimental study on the effect of the key in-cylinder conditions on the ignition system performance has been carried out in a single-cylinder spark-ignition (SI) research engine. The study includes EGR, lambda and energizing time sweeps to assess the behavior of the engine in different operating conditions.

The present work relates to the investigation of the basic oxidation characteristics of iron and aluminium nanoparticles as well as the feasibility of their combustion under both Internal Combustion Engine (ICE)-like and real engine conditions. Based on a series of proof-of-concept experiments, combustion was found to be feasible taking place in a controllable way and bearing similarities to the respective case of conventional fuels. These studies were complimented by relevant in-situ and ex-situ/post-analysis, in order to elaborate the fundamental phenomena occurring during combustion as well as the extent and ‘quality’ of the process. The oxidation mechanisms of the two metallic fuels appear different and -as expected- the energy release during combustion of aluminium is significantly higher than that released in the case of iron.

The purpose of the study reported in this paper was to exploit the possibility of adjusting some injection parameters in a diesel engine fitted with a common-rail injection system with the final goal of reducing pollutant emissions. Starting from the original settings, several injection parameters like nozzle hole diameter, injection pressure and injection duration, were adjusted following three different injection strategies, trying to produce some specific fuel spray patterns (spray penetration and cone angle, air entrainment, etc). Additionally, boost pressure was modified, in order to control spray-air interaction, and EGR was introduced to achieve the required NOx reduction. The adjusted injection setting allowed to generate starting values in pollutants emissions very tolerant to EGR, in such a way that the achieved reduction of NOx was not frustrated by an excessive increase in PM emissions.

New future emission regulations for HD Diesel engines in Europe will require a further reduction in NOx and particulate emission levels compared with nowadays values. The work presented here is an analysis of the EGR influence on the DI Diesel combustion process, based upon a parametric study combining cooled EGR with intake pressure increase. The independent variation of EGR rate and intake pressure allows to analyse the influence of the oxygen concentration and the equivalent fuel/air ratio on the combustion process in an independent way. Tests were performed with a 1.8 litre single-cylinder engine. The study combines performance and emissions measurements together with heat release law analysis. Five representative operative conditions from the European Steady - state test Cycle (ESC) have been considered. For each one, EGR rate (from 0 to 30%) and intake pressure (from 0 to 0.03 MPa over nominal pressure) have been varied independently.