Search Results

Additive manufacturing of aluminium alloy has paved way for the recent advancement in the automobile and aerospace industry due to its light weightlessness and good physical and mechanical features.Even though the additive process has an upper hand in terms of complexity and monotonous nature of the process its sustainability of it over traditional manufacturing is still a question when the whole cycle of the process is considered.This study mainly focuses on the quantitative life cycle analysis conducted on AlSi10Mg with cast AlSi10Mg as a baseline. Life cycle assessment measures environmental impacts, to determine where most impacts arise: machine and supporting hardware; aluminium powder material used, or electricity used to print

The utilization of Additive Manufacturing (AM) technology in the current manufacturing sector is growing day - by - day. This is made possible by the constant development of new materials and techniques to overcome the difficulties that are encountered while fabricating a part. In AM, parts are fabricated by laying successive layers on one another till the complete part is build. This gives AM an edge over conventional manufacturing. Even intricate or hollow parts can be fabricated with the same ease as fabricating a solid part. The key objective of this project is to evaluate and compare mechanical properties of Polyethylene Terephthalate - Glycol modified (PETG) and Carbon fiber reinforced Polyethylene Terephthalate - Glycol modified (CF - PETG), which are fabricated using Fused Deposition Modelling (FDM) process of AM. The ASTM standards D638 and D790 were followed for fabricating tensile test and Flexural test specimens respectively.

Fiber-reinforced polymer composites propose exceptional directional mechanical properties, and combining their advantages with the potential of 3D printing has resulted in many novel research fronts. Industries have started using 3D printed components which are rapidly replacing conventional material components in most of the industries. Carbon fiber reinforced Polylactic Acid (PLA) often finds its application in reasonably high loading conditions working at lesser speed like lightweight gears, spanners, nuts, and bolts. Wear reduction is an important factor that plays an important role in prolonging the component's life. Hence, it is crucial to optimize 3D printing parameters to get desired strength according to the application. The aim of this paper is to conduct the wear rate test on the Fused Deposition Modelled (FDM) printed carbon fiber reinforced PLA parts, to identify the optimum printing parameters which are crucial for wear reduction.

This study examines the influence of cryogenic treatment on the microstructure and on the physical properties of the rapid prototype SLS material. The wear properties of the rapid prototype SLS material both before and after cryogenic treatment are studied in three phases. Phase I deals with the sample preparation through the SLS technique; Phase II involves the preliminary tests like roughness test, hardness test, SEM and wear test. Phase III is the cryogenic treatment of the sample in the setup designed. The cryogenic coolant used is Nitrogen, having a boiling point of 77 K, and the whole treatment process takes about 2 to 3 days. Phase IV deals with the testing of the cryogenically treated samples in which similar tests to that in Phase I are carried out. These results are tabulated and graphs are plotted. Furthermore, the percentage change in the hardness and wear properties of the samples are found.

In Additive manufacturing, Direct Metal Laser Sintering (DMLS) is a rapid manufacturing technique used for manufacturing of functional component. Finely powered metal is melted by using high-energy fiber laser, by Island principle strategy that produces mechanically and thermally stable metallic component with reduced stresses, thermal gradients and at high precision. Inconel is an austenitic chromium nickel-based superalloy often used in the applications which require high strength and temperature resistant. It can retain its properties at high temperature. An attempt is made to examine the effect of laser shot peening (LSP) on DMLS Inconel 718 sample. Microstructure shows elliptical shaped structure and formation of new grain boundaries. The surface roughness of the material has been increased due to the effect of laser shock pulse and ablative nature. Macro hardness increased to 13% on the surface.

The main purpose of this study is to investigate additive manufactured Inconel super alloy subjected to cryogenic treatment (CT). Cryogenic treatment is mainly used in aerospace, defense and automobile application. Direct metal laser sintering is an additive manufacturing technique used for manufacturing of complex and complicated functional components. Inconel is an austenitic chromium nickel based super alloy often used in the applications which require high strength & temperature resistant. In this work, a study is carried out on microstructure and mechanical properties of additive manufactured Inconel 718 when subjected to cryogenic treatment at three different time intervals. The micro-structural evolution of IN718 super-alloy before and after CT was investigated by both optic microscope and scanning electron microscope. Surface roughness and hardness at different CT time intervals has also analyzed. Additionally, XRD technique was used to analyze the surface residual stress.

In additive manufacturing, lasercusing is the selective laser melting technique. Finely pulverized metal is melted using a high-energy fibre laser, by Island principle strategy produces mechanically and thermally stable metallic components with reduced thermal gradients, stresses & at high precision. Maraging steel 300 (18Ni-300) is an iron-nickel steel alloy often used in applications requires high fracture toughness and strength. It maintains dimensional changes at a minimal level, e.g. aircraft and aerospace industries for rocket motor castings and landing gear or tooling applications. Current research attempts to analyze the effect of laser shock peening on lasercused material. Surface roughness of the material was found to be increased by 8%, due to effect of laser shock pulse & ablative nature. Also 8% increase in macro hardness on the surface.