Search Results

Fuel consumption and vehicle breakdown depend upon the driving style of the driver, for example, hard driving style leads to more wear and consequently more failures of vehicle components. Because of this, it is important to identify and classify the driver's driving style in order to give the driver feedback through a driver assistance system. The driver would then be able to detect and learn to avoid a driving style that is not appropriate. The input data is provided by different sensors installed in the vehicle, where different drivers and driving routes have been measured. The data is subjectively classified into two different driving styles: normal and hard. Hard driving style can be characterized, for example, by rapid acceleration and braking. Since it is not trivial to build a model which is able to distinguish hard driving from normal, a data mining approach has been employed.

With the introduction of unleaded gasoline, special fuel agents have appeared on the market for lubricating and cleaning the valve seats. These fuel agents often contain alkali metals that have a significant impact on the ion current signal, thus affecting strategies that use the ion current for engine control and diagnosis, e.g. for estimating the location of the pressure peak. This paper introduces a method for making neural network algorithms robust to expected disturbances in the input signal and demonstrates how well this method applies to the case of disturbances to the ion current signal due to fuel additives containing Sodium. The performance of the neural estimators is compared to a Gaussian fit algorithm, which they outperform. It is also shown that using a fuel additive significantly improves the estimation of the location of the pressure peak.

This paper compares several strategies for air-fuel ratio transient control. The strategies are: A factory standard look-up table based system (a SAAB Trionic 5), a feedback PI controller with and without feed-forward throttle correction, a linear feed-forward control algorithm, and two nonlinear feed-forward algorithms based on artificial neural networks. The control strategies have been implemented and evaluated in a SAAB 9000 car during a transient driving test, consisting of an acceleration in the second gear from an engine speed of 1500 rpm to 3000 rpm. The best strategies are found to be the neural network based ones, followed by the table based factory system. The two feedback PI controllers offer the poorest performance.