Search Results

Electronic control units of Bendix® ABS/ESC and Collision Mitigation Systems have the capability to record event data in the ABS/ESC control unit. Bendix refers to this event data recording functionality as the Bendix Data Recorder (BDR). This paper presents an overview of the BDR functionality and examines the range and resolution of data elements, the synchronicity or timing of the recorded data, and application of the data for use in analyzing crashes. Various tests were performed using trucks equipped with Bendix® Wingman® Fusion™ and were conducted in a manner to trigger BDR records. BDR data was compared to data collected from the J1939 CAN Bus and from Racelogic VBOX data loggers.

The Daimler Detroit AssuranceⓇ 4.0 collision mitigation system is able to assist a driver in various aspects of safely operating their vehicle. One capability is the Active Brake Assist (ABA), which uses the Video Radar Decision Unit (VRDU) to communicate with the front bumper-mounted radar to provide information about potential hazards to the driver. The VRDU may warn the driver of potential hazards and apply partial or full braking, depending on the data being gathered and analyzed. The VRDU also records event data when an ABA event occurs. This data may be extracted from the VRDU using Detroit DiagnosticLink software. This paper presents an overview of the VRDU functionality and examines aspects of VRDU data such as the range and resolution of data elements, the synchronicity or timing of the recorded data, and application of the data for use in the analysis of crashes.

The use of Heavy Vehicle Event Data Recorders (HVEDRs) in collision analysis has been well recognized in past research. Numerous publications have been presented illustrating data accuracy both in normal operating conditions as well as under emergency braking conditions. These data recording devices are generally incorporated into Electronic Control Modules (ECMs) for engines or Electronic Control Units (ECUs) for other vehicular components such as the Anti-Lock Brake System. Other research has looked at after-market recorders, including publically-available Global Positioning System (GPS) devices and fleet management tools such as Qualcomm. In 2009, the National Fire Protection Association (NFPA) incorporated a Vehicle Data Recorder (VDR) component into their Standard for Automotive Fire Apparatus. The purpose of this was to “…capture data that can be used to promote safe driving and riding practices.” The Standard requires minimum data elements, recording times, and sample rates.

In the investigation of a collision involving recreational watercraft, analytical methods are generally limited when compared to incidents involving land-based vehicles. As is indicated in previous publications, investigators often rely on time/distance relationships, human factors, the matching of damage to determine vessel positioning at impact, and the recollections of witnesses. When applicable, speed estimates are generally based on the boat engine's revolutions. By considering the engine speed, the drive gear ratio, the propeller pitch, and the likely slip of the propeller, an estimation of the boat's travel speed can be made. In more recent publications, it has been recognized that Event Data Recorder (EDR) technology incorporated into various Electronic Control Units (ECUs) used in automotive applications can be beneficial to collision investigation and reconstruction.

It is well recognized that Heavy Vehicle Event Data Recorder (HVEDR) technology has been incorporated in the Electronic Control Modules (ECMs) on many on-highway commercial motor vehicles. The dynamic time-series data recorded by these HVEDRs typically include vehicle speed, engine speed, brake and clutch pedal status, and accelerator pedal position. With specific respect to Detroit Diesel ECMs, data are recorded surrounding certain events at a rate of 1.0 Hz. In this research, controlled testing was conducted to determine the time differences between the values being generated by the sourcing sensors and the interpreted data being broadcast on the vehicle's SAE J1939 controller area network (CAN). To accomplish this, raw sensor data as provided to the ECM was monitored, as were the subsequent J1939 CAN transmissions from the ECM.

The use of Heavy Vehicle Event Data Recorders (HVEDRs) in collision analysis has been recognized in past research. Numerous publications have been presented illustrating data accuracy both in normal operating conditions as well as under emergency braking conditions [1,2,3]. To date, the bulk of this research has focused on HVEDRs incorporated into the Electronic Control Modules (ECMs) employed by various manufacturers to monitor and control engine operation. Oftentimes, data associated with engine diagnostic faults include vehicle speed and driver input parameters that are later used in a collision analysis. In addition to the ECM, other electronic control systems may store data associated with fault conditions. For example, the Antilock Braking System (ABS) Electronic Control Unit (ECU), which is tasked with electronically controlling brake application air pressure to reduce wheel lockup, is such a unit that has the ability to store diagnostic information.

It has been recognized that Event Data Recorder (EDR) technology incorporated into the Electronic Control Modules (ECMs) of on-highway heavy truck engines can be a benefit to motor vehicle collision investigation and reconstruction [1,2,3,4,5,6,7]. Such beneficial features include the snapshots recorded by many Caterpillar engines. These snapshots, which are triggered by engine faults, operator input, or by what is called a “Quick Stop,” record engine operation and parameters surrounding the event. Past research has reported that while snapshot data are accurate, the documented event time may be off by 24 hours in some ECMs, notwithstanding the module's clock settings being correct [7]. Furthermore, other research has suggested that some modules may report the time interval between data points at approximately two times the actual duration [6].

Event Data Recorder (EDR) technology has been incorporated into the Electronic Control Modules (ECMs) of many on-highway heavy trucks. One benefit of this technology is its applicability to vehicle collision investigation and reconstruction ( Goebelbecker & Ferrone, 2000 ; van Nooten & Hrycay, 2005 ). However, collisions that cause extensive damage to the truck may cause a loss of electrical power to the ECM, which might interrupt the data storage process. This research is an attempt to determine the effects of power loss on heavy vehicle ECMs 1 , and the associated effects on data collected by the EDR function. Controlled testing was conducted with Detroit Diesel, Mercedes, Mack, Cummins, and Caterpillar engines, and power failures were created by artificially interrupting power between the vehicle's battery and ECM at predetermined intervals. EDR data from the test vehicles were extracted after each test, and the presence or absence of new data was examined.