Search Results

In the modern GDI systems, the optimization of the fuel injection process is essential to prepare an air-fuel mixture capable to promote efficient combustion and reduce fuel consumption and pollutant emissions. A key feature for a better atomization is the fuel injection pressure. The increasing of the injection pressure is considered a good way for particle number (PN) reduction due to improved spray atomization, faster evaporation and better mixture formation. In this paper, a multi-hole GDI injector was tested to investigate the effects of very high injection pressures (IVHP), in addition to different ambient densities and temperatures, on the fuel spray morphology, in a cycle-resolved images analysis. Commercial gasoline was injected at the pressures ranging between 40.0 to 70.0 MPa, at gas densities varying between 1.12 to 11.5 kg/m3, and gas temperature up to 200°C.

Alternative diesel fuels from renewable sources (biodiesels) have increased significantly interest due to their potential CO₂ emission benefits, capability to reduce unburned hydrocarbons and particulate matter emissions, biodegradability and non-toxicity. Biodiesels undergo ageing effects due to autoxidation processes of their molecular chains. Ageing leads to a variety of decomposition products like peroxides, alcohols, aldehydes and carboxylic acids. They are detectable as alterations of chemical properties, odor and taste (rancidity). The characteristics of Rapeseed Methylester (RME), RME aged and diesel sprays have been analyzed for different injection strategies in engines. The tests have been performed on a Bosch second generation common rail solenoid-driven fuel injection system capable of 160 MPa maximum injection pressure, fitted on EURO5 diesel engine for passenger car applications.

This paper reports the study of the effects of alternative diesel fuel and the impact for the air-fuel mixture preparation. The injection process characterization has been carried out in a non-evaporative high-density environment in order to measure the fuel injection rate and the spatial and temporal distribution of the fuel. The injection and vaporization processes have been characterized in an optically accessible single cylinder Common Rail diesel engine representing evaporative conditions similar to the real engine. The tests have been performed by means of a Bosch second generation common rail solenoid-driven fuel injection system with a 7-holes nozzle, flow number 440 cc/30s @100bar, 148deg cone opening angle (minisac type). Double injection strategy (pilot+main) has been implemented on the ECUs corresponding to operative running conditions of the commercial EURO 5 diesel engine.

The paper aims at performing an environmental and energetic optimization of a naturally aspirated, light-duty direct injection (DI) diesel engine, equipped with a Common Rail injection system. Injection modulation into up to three pulses is considered starting from an experimental campaign conducted under non-evaporative conditions in a quiescent optically-accessible cylindrical vessel containing nitrogen at different densities. The engine performances in terms of power and emitted NOx and soot are reproduced by multidimensional modelling of the in-cylinder processes. The radiated noise is evaluated by resorting to a recently developed methodology, based on the decomposition of the CFD 3D computed in-cylinder pressure signal. Once validated, both the CFD and the acoustic procedures are applied to the simulation of the prototype engine and are coupled to an external optimizer with the aim of minimizing fuel consumption, pollutant emissions and radiated noise.

GM Powertrain Europe and Istituto Motori CNR have undergone a research project aimed at studying the effects on engine performance, emissions and fuel consumption of alternative diesel fuels, from both first (FAME) and second (GTL) generation. The present paper reports some of the results achieved studying the impact on injection and spray behavior of rapeseed and soybean methyl-esters, as well as of GTL diesel blends. The test were performed on a Bosch second generation common rail solenoid-driven fuel injection system capable of 1600bar maximum injection pressure, fitted on GM 1.9L Euro4 diesel engine for passenger cars. The characterization of the injection process has been carried out in terms both of fuel injection rate, as well as of spatial and temporal fuel distribution in a quiescent non-evaporative optically accessible chamber.