Search Results

Diesel exhaust gas aftertreatment systems, which include the selective catalytic reduction (SCR)*) for reduction of NOx are necessary to fulfil the latest legal requirements and are extensively used in the heavy duty (HD) sector. The present paper informs about some results obtained with SCR and with SDPF (a DPF with SCR-coating) on a medium duty research engine Iveco F1C. Beside the limited gaseous emission components NH3, NO2 and N2O were measured. The analysis of nanoparticle emissions was performed with SMPS and CPC. The integration of functions of filtration and NOx-reduction in one element of exhaust aftertreatment system offers several advantages and is widely investigated and considered as a market solution.

Exhaust gas recirculation (EGR) has long been used in gasoline and light-duty diesel engines as a NOx reduction tool. Recently imposed emission regulations led several heavy-duty diesel engine manufacturers to adopt EGR as part of their strategy to reduce NOx. The effectiveness of this technology has been widely documented, with NOx reduction in the range of 40 to 50 percent having been recorded. An inevitable consequence of this strategy is an increase in particulate emission, especially if EGR was used in high engine load modes. Selective catalytic reduction (SCR), a method for NOx reduction, is widely used in stationary applications. There is growing interest and activity to apply it to mobile fleets equipped with heavy-duty diesel engines. Results of this work indicate that SCR has the potential to dramatically reduce NOx in diesel exhaust. Reductions greater than 70 percent were reported by several including the Institute's previous work (SAE Paper No. 1999-01-3564).

In the past, concentrated efforts were directed at developing a cost effective and reliable particulate trap, assisted by mechanical (burners) or electrical (heating elements) regeneration means. Although ceramic monolith filter developments have been straightforward, regeneration systems have proven to be problematic and costly. Therefore, these development efforts led to disappointing results. Using catalytic fuel additives to promote regeneration in a trap through lowering the incineration temperature of collected soot is an attractive alternative. This passive form of regeneration could be technically and economically advantageous for diesel applications by eliminating complex sensors and controllers required for regeneration systems in new installations as well as retrofitting older vehicles. A cerium based fuel additive was used to assist in regenerating particulate traps in diesel exhaust aftertreatment.